AMS F5848

AMS Radio-Controlled Wall Clock 5848

Modell: F5848

1. Einleitung

Thank you for choosing the AMS Radio-Controlled Wall Clock Model F5848. This modern silver wall clock is designed for precision timekeeping, automatically synchronizing with a radio time signal. Its elegant design, featuring a mineral glass and a large display, makes it a perfect addition to any room, especially a study. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your clock.

AMS Radio-Controlled Wall Clock 5848, front view

Abbildung 1.1: Front view of the AMS Radio-Controlled Wall Clock 5848. This image shows the round silver and white clock face with black hour, minute, and second hands. The numbers 1 through 12 are clearly visible, with the AMS logo and a radio signal icon below the 12 o'clock position. The outer ring is silver-toned, and the inner face is white.

2. Sicherheitshinweise

Please read all safety instructions carefully before using the clock. Keep this manual for future reference.

  • Batteriesicherheit:
    • Use only the specified type and size of battery.
    • Insert batteries with correct polarity (+ and -). Incorrect insertion may cause damage.
    • Mischen Sie keine alten und neuen Batterien oder verschiedene Batterietypen.
    • Entfernen Sie leere Batterien umgehend, um Auslaufen und Beschädigungen zu vermeiden.
    • If the clock is not used for a long period, remove the batteries to prevent leakage.
    • Bewahren Sie Batterien außerhalb der Reichweite von Kindern auf.
  • Allgemeine Vorsichtsmaßnahmen:
    • Setzen Sie die Uhr keinen extremen Temperaturen, direkter Sonneneinstrahlung oder hoher Luftfeuchtigkeit aus.
    • Vermeiden Sie starke Vibrationen oder Stöße.
    • Do not disassemble or modify the clock. This will void the warranty.
    • Clean the clock only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Packungsinhalt

Bitte überprüfen Sie den Packungsinhalt nach dem Öffnen. Sollten Artikel fehlen oder beschädigt sein, wenden Sie sich bitte an Ihren Händler.

  • AMS Radio-Controlled Wall Clock (Model F5848)
  • Benutzerhandbuch (dieses Dokument)
  • (Battery may or may not be included depending on retailer/region)

4. Einrichtung

4.1. Einlegen der Batterie

  1. Suchen Sie das Batteriefach auf der Rückseite der Uhr.
  2. Öffnen Sie die Abdeckung des Batteriefachs.
  3. Insert one AA (or specified type) battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Schließen Sie den Batteriefachdeckel fest.

4.2. Initial Time Synchronization (Radio-Controlled)

Your AMS clock is radio-controlled and will automatically set itself to the correct time once batteries are installed and a signal is received. This process may take a few minutes to several hours depending on your location and signal strength.

  1. After inserting the battery, the clock hands will typically move to the 12 o'clock position and then stop. This indicates it is searching for the radio signal.
  2. Place the clock in an area with good radio signal reception. Avoid placing it near large metal objects, electronic devices, or in basements, which can interfere with the signal. A window-facing wall is often ideal.
  3. Once the signal is received, the clock will automatically adjust to the correct time. This usually happens within a few minutes, but can take longer.
  4. If the clock does not set itself after 24 hours, try relocating it to a different position or refer to the Troubleshooting section.

4.3. Montage der Uhr

Die Uhr ist zur Wandmontage vorgesehen.

  1. Choose a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approx. 1.6 kg).
  2. Verwenden Sie für Ihre Wandart einen geeigneten Dübel und eine Schraube (nicht im Lieferumfang enthalten).
  3. Hang the clock securely using the hanging slot on the back.

5. Bedienung

5.1. Zeitanzeige

The AMS Radio-Controlled Wall Clock displays time using traditional hour, minute, and second hands. The large display ensures easy readability from a distance.

5.2. Radio Signal Reception

The clock continuously monitors the radio time signal to maintain accurate time. In areas with poor reception, the clock may occasionally lose synchronization. It will attempt to re-synchronize automatically. If the signal is consistently weak, you may need to relocate the clock.

5.3. Manual Time Setting (If Applicable)

Most radio-controlled clocks do not have a manual time setting function, as they rely solely on the radio signal. If your clock has a small button or dial on the back (often labeled "M.SET" or similar), it may allow for manual adjustment in areas without signal. Refer to the specific markings on your clock's movement if automatic synchronization fails persistently.

6. Wartung

6.1. Reinigung

To clean the clock, gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or the mineral glass.

6.2. Batteriewechsel

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery. Follow the battery installation steps in Section 4.1. Always replace with a fresh, high-quality battery of the specified type.

6.3. Speicherung

If you plan to store the clock for an extended period, remove the battery to prevent potential leakage and damage to the movement.

7. Fehlerbehebung

ProblemMögliche UrsacheLösung
Clock hands do not move or stop.Dead or low battery. Incorrect battery polarity.Replace battery with a fresh one, ensuring correct polarity.
Die Uhr zeigt die falsche Zeit an oder synchronisiert sich nicht.Schlechter Radioempfang. Störungen durch andere elektronische Geräte.Relocate the clock to an area with better signal (e.g., near a window, away from electronics). Allow up to 24 hours for synchronization.
Clock loses time or gains time intermittently.Weak battery. Intermittent signal loss.Replace battery. Check for consistent signal reception.
Hands are misaligned (e.g., not pointing to 12 after reset).Internal mechanism issue or strong magnetic interference.Remove battery for 1 minute, then reinsert. Allow clock to re-synchronize. If problem persists, contact support.

8. Spezifikationen

BesonderheitDetail
MarkeAMS
ModellnummerF5848
FarbeSilber
Produktabmessungen (L x B x H)31 x 4 x 213 cm (Note: 213cm height seems incorrect for a wall clock, likely a data entry error. Assuming 31x31cm for a round clock based on feature bullets and image.)
Actual Product Dimensions (Diameter x Depth): 31 x 4 cm (approx.)
MaterialGlass (Mineral Glass), Aluminum (Brushed Aluminum finish on ring)
Artikelgewicht1.6 Kilogramm
AnzeigetypAnalog
StilModern
BesonderheitLarge display, Radio-controlled
StromquelleBatteriebetrieben
ZimmertypStudy Room (Suggested)
FormRunden

Hinweis: Produktspezifikationen können ohne vorherige Ankündigung geändert werden.

9. Garantie und Support

9.1. Garantieinformationen

Specific warranty terms and conditions for the AMS Radio-Controlled Wall Clock Model F5848 are provided by the manufacturer, AMS. Please refer to any warranty card included with your product or visit the official AMS webAuf der Website finden Sie detaillierte Garantieinformationen. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

9.2. Kundendienst

Für technische Unterstützung, Fehlerbehebung, die über dieses Handbuch hinausgeht, oder Garantieanfragen wenden Sie sich bitte an:

  • Your retailer where the product was purchased.
  • The official AMS customer support channels (refer to the AMS web(Kontaktdaten finden Sie auf der Website).

When contacting support, please have your model number (F5848) and purchase date ready.

Zugehörige Dokumente - F5848

Vorview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Vorview AMS Wanduhr – Bedienungsanleitung
Bedienungsanleitung für AMS-Wanduhren, einschließlich Batterieeinbau, -wechsel und allgemeiner Verwendung in mehreren Sprachen.
Vorview ams AS5600L Adapter Board Evaluierungskit Handbuch
Dieses Handbuch bietet umfassende Informationen zur Adapterplatine ams AS5600L-WL_EK_AB, einschließlich Kit-Inhalt, Platinenbeschreibung, Montagehinweise, Pinbelegung, I2C-Modus-Betrieb, Hardware-Schaltpläne, PCB-Layout und Bestellinformationen.
Vorview ams AS5048 14-Bit-Drehpositionssensor Benutzerhandbuch
Dieses Benutzerhandbuch enthält detaillierte Informationen zum ams AS5048, einem 14-Bit-Drehpositionssensor mit digitalem Winkel- und PWM-Ausgang. Es behandelt die AS5048-Adapterplatine, Montage, Pinbelegung, Betriebsarten (SPI, Daisy Chain), Firmware-Codierung usw.ampDateien und Hardwareschemata. Unverzichtbar für Ingenieure, die diesen Sensor in ihre Systeme integrieren.
Vorview ams AS5048 Adapter Board Evaluation Kit Handbuch
Dieses Handbuch beschreibt das ams AS5048 Adapterboard (AS5048-EK-AB), ein Evaluierungskit für den magnetischen Positionssensor AS5048. Es behandelt Hardware, Betriebsmodi (SPI, I2C), Software und mehr.amples und Kontaktinformationen für ams AG.
Vorview Bedienungsanleitung und Batteriewechselleitfaden für AMS-Uhren
Anleitung zur Bedienung und zum Batteriewechsel bei AMS-Uhren, mit mehrsprachiger Anleitung.