Einführung
The Wahl Professional Super Taper II Corded Clipper is a high-performance hair cutting tool designed for versatile use. It features a powerful V5000 motor and an adjustable blade, suitable for various hair cutting needs.
Packungsinhalt:
- Wahl Professional Super Taper II Corded Clipper
- 8 Attachment Combs (various lengths)
- Reinigungsbürste
- Klingenöl
- Bedienungsanleitung
- Klingenschutz
- Stylingkamm
Image: Wahl Professional Super Taper II Corded Clipper, showing its silver and black design with the power cord.
Image: The Wahl Super Taper II Corded Clipper highlighting its features such as the adjustable taper lever, powerful electromagnetic V5000 motor, and suitability for tapering, fades, and blends.
Image: A visual representation of all items included in the Wahl Super Taper II Corded Clipper package, including the clipper, various colored guide combs, cleaning brush, oil, and styling comb.
Wichtige Sicherheitsinformationen
To reduce the risk of electric shock, injury, or damage, please read all instructions before using this appliance.
- Greifen Sie nicht nach einem ins Wasser gefallenen Gerät. Ziehen Sie sofort den Stecker.
- Nicht beim Baden oder unter der Dusche verwenden.
- Stellen Sie das Gerät nicht an einem Ort ab und lagern Sie es nicht an einem Ort, an dem es in eine Wanne oder ein Waschbecken fallen oder hineingezogen werden könnte.
- Nicht in Wasser oder andere Flüssigkeiten legen oder fallen lassen.
- Ziehen Sie den Stecker des Geräts immer sofort nach Gebrauch aus der Steckdose.
- Trennen Sie dieses Gerät vom Netz, bevor Sie Teile reinigen, anbringen oder abnehmen.
- Bei der Verwendung des Geräts durch, an oder in der Nähe von Kindern oder Kranken ist eine genaue Aufsicht erforderlich.
- Verwenden Sie dieses Gerät nur für den vorgesehenen Haushaltszweck, wie in dieser Anleitung beschrieben.
- Verwenden Sie keine Aufsätze, die nicht vom Hersteller empfohlen werden.
- Betreiben Sie dieses Gerät niemals, wenn es ein beschädigtes Kabel oder einen beschädigten Stecker hat, wenn es nicht richtig funktioniert, fallen gelassen oder beschädigt wurde.
- Halten Sie das Kabel von heißen Oberflächen fern.
- Lassen Sie niemals Gegenstände in Öffnungen fallen oder stecken Sie sie hinein.
- Nicht im Freien verwenden oder an Orten betreiben, an denen Aerosolprodukte (Sprays) verwendet werden oder Sauerstoff verabreicht wird.
- Verwenden Sie dieses Gerät nicht mit einem beschädigten oder kaputten Kamm, da es zu Verletzungen kommen kann.
- Before storing, make sure the cord is not twisted or kinked.
Einrichtung und erstmalige Verwendung
Auspacken:
Carefully remove the clipper and all accessories from the packaging. Inspect the clipper for any visible damage. Ensure all listed components are present.
Blade Adjustment (Zero-Gapping):
For closer cutting, the blades can be adjusted. This process, known as "zero-gapping," involves aligning the cutting blade closer to the bottom blade.
- Loosen the two screws on the clipper blade slightly.
- Carefully push the bottom blade closer to the cutting blade. Ensure the cutting blade does not extend beyond the bottom blade to prevent skin irritation.
- Maintain a slight, barely visible gap between the two blades.
- Hold the bottom blade firmly by its sides and carefully tighten the screws.
- Turn the clipper on for a few seconds, then off, to check blade alignment. If misaligned (e.g., the far left tooth of the cutting blade should overlap with the 2nd tooth of the bottom blade), repeat the adjustment process.
- If the blades are aligned but the clipper behaves strangely, adjust the power screw on the side of the clipper until optimal performance is achieved.
Vorsicht: A zero-gapped clipper cuts very close. Always ensure the blade is flat against the scalp to avoid nicks or cuts.
Bedienungsanleitung
Ein-/Ausschalten:
Plug the clipper into a suitable electrical outlet. Use the power switch located on the side of the clipper to turn it on or off.
Verwendung von Aufsteckkämmen:
The clipper comes with 8 color-coded attachment combs for various cutting lengths. To attach a comb, align it with the clipper blade and push until it securely snaps into place. Ensure the comb is firmly attached before use to prevent it from detaching during a haircut.
Image: A set of colorful Wahl guide combs, used to achieve different hair cutting lengths.
Einstellbarer Kegelhebel:
The adjustable taper lever allows for fine-tuning cutting lengths without changing attachment combs. Moving the lever up (closed) provides a shorter cut, while moving it down (open) provides a longer cut. This feature is useful for blending and tapering.
Tipps zum Haareschneiden:
- Always start with a longer comb length than desired and gradually reduce it.
- Cut against the direction of hair growth for an even cut.
- Verwenden Sie gleichmäßige, sich überlappende Striche.
- For self-haircuts, use multiple mirrors to ensure accuracy, especially for the back of the head.
Wartung
Reinigen der Klingen:
After each use, turn off and unplug the clipper. Use the provided cleaning brush to remove any loose hair from the blades. Regular cleaning prevents hair buildup and ensures optimal performance.
Ölen der Klingen:
Oiling the blades is crucial for maintaining clipper performance, reducing friction, preventing pulling and snagging, and protecting against rust. Wahl's high-carbon blades benefit significantly from regular oiling.
- Stellen Sie sicher, dass der Haarschneider sauber und frei von Haaren ist.
- Apply a drop of Wahl clipper oil to each corner of the top blade.
- Apply a drop of oil to the foot of the blade (the part that moves against the stationary blade).
- Turn the clipper on for a few seconds to allow the oil to distribute evenly across the blades.
- Wischen Sie überschüssiges Öl mit einem sauberen Tuch ab.
Oiling is recommended after every few haircuts, or whenever the clipper feels sluggish or starts to pull hair.
Video: A demonstration on how to oil clipper blades to prevent pulling and maintain performance. This video shows the proper application of oil to the blades and how to distribute it.
Lagerung:
When not in use, store the clipper unplugged, away from moisture, and with the blade guard in place to protect the blades.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Clipper pulls hair or cuts unevenly | Blades are dull, not oiled, or misaligned. | Clean and oil blades. Check blade alignment and adjust if necessary (refer to "Blade Adjustment" section). If blades are dull, consider replacement. |
| Clipper makes unusual noise or vibrates excessively | Blades need oiling or power screw adjustment. | Oil the blades. Adjust the power screw on the side of the clipper until the noise subsides and operation is smooth. |
| Attachment comb detaches during use | Comb not securely attached or excessive force used. | Ensure the comb snaps firmly into place before use. Avoid using excessive force or rough handling during cutting. |
| Clipper overheats quickly | Prolonged use or lack of lubrication. | Allow the clipper to cool down. Ensure blades are properly oiled to reduce friction. Avoid continuous operation for extended periods. |
Technische Daten
- Modellnummer: 84701
- Marke: Wahl Professional
- Energiequelle: Kabelgebundene Elektrik
- Motor: V5000 Electromagnetic Motor
- Klingentyp: Adjustable High-Carbon Steel Blades
- Farbe: Silber & Schwarz
- Artikelgewicht: 1 Pfund
- Produktabmessungen: 12 x 4 x 6 Zoll
- GTIN (UPC): 043917847016
Garantie und Support
Garantieinformationen:
The Wahl Professional Super Taper II Corded Clipper comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Kundendienst:
For technical assistance, troubleshooting, or warranty service, please contact Wahl Professional customer service. Contact details can typically be found on the Wahl Professional webvor Ort oder in der Originalverpackung des Produkts.
Video: Ein überview of the Wahl Professional Super Taper II Hair Clipper, model 8470-500, highlighting its ultra-powerful full-size design and V5000 motor.
