1. Produktüberschreitungview
The Lincoln Electric KP510 TIG Accessory Parts Kit is designed to provide essential consumables for maintaining and operating PTW-20 TIG torches. This kit includes a variety of components necessary for TIG welding, ensuring you have the right parts on hand for efficient operation.
The kit contains collets, collet bodies, a back cap, alumina nozzles, and tungsten electrodes in various sizes. All components are organized within a durable, reclosable box for convenient storage and transport.
2. Kit-Komponenten
The KP510 kit includes the following parts, designed for compatibility with PTW-20 TIG torches:
- Spannzangen: Components that hold the tungsten electrode securely in place.
- Collet Bodies: These hold the collet and direct the shielding gas flow.
- Hintere Kappe: Seals the back of the torch head and provides a path for the tungsten electrode.
- Alumina Nozzles: Ceramic cups that direct the shielding gas to the weld puddle. Available in various sizes (e.g., #5, #6, #7) to control gas coverage.
- Wolframelektroden: Non-consumable electrodes that conduct the welding current. Provided in different diameters.
Abbildung 2.1: Überview of the Lincoln Electric KP510 TIG Accessory Parts Kit, showing the clear plastic case containing various collets, collet bodies, alumina nozzles, a back cap, and tungsten electrodes.
Abbildung 2.2: Ausführlich view of individual components from the KP510 kit, including different sizes of alumina nozzles, collets, and collet bodies.
3. Einrichtung und Installation
This section provides general guidance for installing the accessory parts into a PTW-20 TIG torch. Always refer to your specific TIG torch manual for detailed instructions.
- Komponenten auswählen: Choose the appropriate size of collet, collet body, alumina nozzle, and tungsten electrode based on your welding application and current requirements.
- Install Collet Body: Thread the selected collet body into the torch head. Ensure it is finger-tight.
- Insert Collet and Tungsten: Insert the chosen collet into the collet body. Then, slide the tungsten electrode through the collet and collet body from the back of the torch.
- Attach Back Cap: Thread the back cap onto the torch body, tightening it to secure the tungsten electrode. Adjust the tungsten stick-out as needed.
- Attach Alumina Nozzle: Push or thread the selected alumina nozzle onto the front of the torch head, ensuring a snug fit.
- Gasanschluss: Verify that the shielding gas connection to the torch is secure and free from leaks.
Notiz: Proper installation of these components is crucial for effective shielding gas coverage and stable arc performance. Incorrect assembly can lead to poor weld quality.
4. Betriebliche Überlegungen
Once the accessory parts are correctly installed, consider the following for optimal TIG welding performance:
- Wolfram-Vorbereitung: Ensure your tungsten electrode is properly ground to the correct taper for your application.
- Schutzgasdurchfluss: Set the shielding gas flow rate according to the nozzle size and welding current. Insufficient flow can lead to porosity.
- Düsenauswahl: Use the appropriate nozzle size for the joint configuration and desired gas coverage. Larger nozzles provide wider gas coverage.
- Aktuelle Einstellungen: Adjust welding current based on material thickness and tungsten diameter.
5. Wartung
Regular maintenance of your TIG torch accessories ensures consistent welding performance and extends the life of your equipment.
- Inspect Alumina Nozzles: Regularly check nozzles for cracks, chips, or excessive spatter buildup. Replace damaged nozzles to maintain proper gas shielding.
- Clean Collets and Collet Bodies: Remove any spatter or debris from collets and collet bodies. Ensure they are clean to allow for proper tungsten seating and gas flow.
- Tungsten Replacement: Replace tungsten electrodes when they become contaminated, blunted, or too short for effective grinding.
- Lagerung: Store unused components in the provided reclosable box to protect them from dust and damage.
6. Fehlerbehebung bei häufigen Problemen
This section addresses common issues related to TIG torch consumables. For comprehensive torch troubleshooting, refer to your TIG welding machine's manual.
| Ausgabe | Possible Cause (Consumable Related) | Lösung |
|---|---|---|
| Porosität in der Schweißnaht | Cracked or dirty alumina nozzle, incorrect gas flow, loose collet body. | Inspect/replace nozzle, check gas flow rate, tighten collet body. |
| Instabiler Lichtbogen | Contaminated or improperly ground tungsten, loose collet. | Regrind or replace tungsten, ensure collet is holding tungsten securely. |
| Tungsten Slipping | Worn collet, loose back cap. | Replace collet, tighten back cap. |
7. Spezifikationen
- Marke: Elektro-Großhandel
- Modellnummer: KP510
- Teilenummer: KP510
- Material: Alumina (for nozzles)
- Artikelgewicht: 0.22 Kilogramm (ca. 7.7 Unzen)
- Produktabmessungen: 6 x 1 x 1 Zoll (Verpackung)
- UPC: 015082165103
- Enthaltene Komponenten: Kit (Collets, Collet Bodies, Back Cap, Alumina Nozzles, Tungsten)
8. Sicherheitshinweise
WARNUNG: Dieses Produkt kann Sie Chemikalien aussetzen, darunter Blei, das im US-Bundesstaat Kalifornien als krebserregend und als Ursache für Geburtsfehler oder andere Fortpflanzungsschäden gilt. Weitere Informationen finden Sie unter www.P65Warnings.ca.gov.
Always follow general welding safety practices, including wearing appropriate personal protective equipment (PPE) such as welding helmets, gloves, and protective clothing.
9. Garantie und Support
This product is sold without an explicit warranty. For product support or inquiries regarding Lincoln Electric products, please visit the official Lincoln Electric webWebsite oder wenden Sie sich an die Kundendienstabteilung.
