1. Einleitung
Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.
Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.
2. Sicherheitshinweise
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- Vor Beginn der Installation oder der Durchführung von Wartungsarbeiten muss immer die Stromzufuhr am Hauptsicherungsschalter oder Sicherungskasten unterbrochen werden.
- Schließen Sie diese Leuchte nicht an ein nicht geerdetes elektrisches System an.
- Überschreiten Sie nicht die maximale Wassermengetage specified for the bulbs (2 x 100-Watt medium base bulbs).
- Gehen Sie vorsichtig mit Glaskomponenten um, um ein Zerbrechen zu vermeiden.
- Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.
3. Packungsinhalt
Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.
- Fixture Body with Brushed Nickel Finish
- Square Etched Glass Shade
- Montagezubehör (Querträger, Schrauben, Drahtverbinder)
- Chain (for hanging installation option)
- Ceiling Mount Canopy (for semi-flush installation option)
- Bedienungsanleitung
4. Einrichtung und Installation
This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.
4.1. Vorinstallation
- Schalten Sie den Strom am Leistungsschalter ab.
- Remove existing fixture (if applicable).
- Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).
4.2. Semi-Flush Mount Installation
- Attach the mounting crossbar to the outlet box using the provided screws.
- Connect the fixture's ground wire to the supply ground wire using a wire nut.
- Connect the fixture's white wire to the supply white (neutral) wire.
- Connect the fixture's black wire to the supply black (hot) wire.
- Stecken Sie alle Kabel vorsichtig in die Anschlussdose.
- Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
- Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).
Abbildung 4.1: Eine detaillierte view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.
4.3. Hanging Fixture Installation (with Chain)
- Follow steps 1-5 from the Semi-Flush Mount Installation.
- Determine the desired hanging length and adjust the chain accordingly.
- Thread the fixture's electrical wires through the chain and the canopy.
- Secure the chain to the mounting loop on the crossbar and to the fixture body.
- Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
- Attach the etched glass shade to the fixture body.
Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.
Abbildung 4.3: Eine Nahaufnahme view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.
5. Bedienungsanleitung
Once the fixture is securely installed and wired, you can begin operation.
- Lampen installieren: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
- Strom wiederherstellen: Schalten Sie den Strom am Hauptschalter wieder ein.
- Licht aktivieren: Use the wall switch connected to the fixture to turn the light on and off.
The etched glass shade provides a softly diffused light, ideal for various indoor settings.
6. Wartung
Regelmäßige Wartung trägt dazu bei, das Aussehen und die Funktionalität Ihrer Leuchte zu erhalten.
- Reinigung: To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp Man kann ein Tuch verwenden und anschließend mit einem trockenen Tuch nachwischen.
- Lampenwechsel: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
- Inspektion: Überprüfen Sie die Verkabelung und Anschlüsse regelmäßig auf Verschleiß oder Beschädigungen. Sollten Sie Mängel feststellen, wenden Sie sich an einen qualifizierten Elektriker.
7. Fehlerbehebung
Falls Ihre Leuchte nicht ordnungsgemäß funktioniert, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an | Kein Strom zum Gerät | Prüfen Sie den Leitungsschutzschalter oder die Sicherung. Stellen Sie sicher, dass der Wandschalter eingeschaltet ist. |
| Licht geht nicht an | Lose Kabelverbindungen | Turn off power, check all wire connections. Secure them firmly. |
| Licht geht nicht an | Defekte Glühbirne | Ersetzen Sie die Glühbirne durch eine neue des richtigen Typs und der richtigen Wattzahl.tage. |
| Flackerndes Licht | Lose Glühbirne oder Verkabelung | Turn off power, tighten bulb. Check wire connections. |
| Brummendes Geräusch | Inkompatibler Dimmerschalter | Stellen Sie sicher, dass der Dimmerschalter mit Glühlampen kompatibel ist. |
If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.
8. Spezifikationen
Detailed technical specifications for the P3597-09 fixture:
| Attribut | Wert |
|---|---|
| Modellnummer | P3597-09 |
| Abmessungen (Breite x Höhe) | 12-3/4 inches (32.38 cm) x 13-5/8 inches (34.61 cm) |
| Produktabmessungen (insgesamt) | 33.02 x 33.02 x 35.56 cm |
| Artikelgewicht | 2.72 kg |
| Material | Glass, Metal (Brushed Nickel Finish) |
| Lampentyp | Incandescent (Medium Base / E26) |
| Anzahl der Glühbirnen | 2 |
| Maximal Watttage pro Birne | 100 Watt |
| Bandtage | 120 Volt |
| Installationsmethode | Semi Flush Mount / Hanging (Chain Included) |
| Stil | Mission / Craftsman |
| Farbe | Gebürstetes Nickel |
Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.
9. Garantie und Support
Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting webWebsite.
Hersteller: Fortschritt Beleuchtung
Geschäftssitz: GREENVILLE, SC, 29607 US
