1. Produktüberschreitungview
This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.
1.1. Hauptmerkmale
- Integrated foot controller and power cord.
- Genuine SINGER replacement part.
1.2. Compatible SINGER Sewing Machine Models
This foot controller and power cord is compatible with the following SINGER sewing machine models:
- Sängerin 1105
- Sängerin 1116
- Sängerin 1120
- Sängerin 1130
- Sängerin 118
- Sängerin 1525
- Sängerin 1725
- Sängerin 1748
- Sängerin 2639
- Sängerin 2662
- Sängerin 2712
- Sängerin 2722
- Sängerin 2732
- Sängerin 2718
- Sängerin 2724
- Sängerin 2730
- Singer 3116 Simple
- Sängerin 3709
- Sängerin 3722
- Sängerin 3810
- Sängerin 3820
- Sängerin 3825
- Sängerin 3962
- Sängerin 4102
- Singer 4205 Inspiration
- Singer 4206 Inspiration
- Singer 4210 Inspiration
- Singer 4212 Inspiration
- Singer 4220 Inspiration
- Singer 4228 Inspiration
- Sängerin 6510
- Sängerin 6550
- Sängerin 7312
- Sängerin 7322
- Sängerin 7350
- Singer 14T98DS
2. Einrichtungsanweisungen
Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.
2.1. Connecting the Foot Controller to the Sewing Machine
- Identify the Connector Port: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
- Den Stecker ausrichten: Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
- Stecken Sie den Stecker ein: Drücken Sie den Stecker vorsichtig und fest in die Buchse, bis er vollständig eingerastet ist. Wenden Sie keine Gewalt an.
Image: Three-pin connector for the sewing machine input.
Image: Connector dimensions for proper fit.
2.2. Connecting to Power Outlet
- Stellen Sie sicher, dass die Maschine ausgeschaltet ist: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
- In die Steckdose stecken: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).
Image: Power plug with voltage-Spezifikationen.
Image: Complete foot controller and power cord assembly.
Image: SINGER Foot Controller and Power Cord.
3. Bedienungsanleitung
Once the foot controller is properly connected, you can begin operating your sewing machine.
3.1. Controlling Sewing Speed
- Maschine einschalten: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
- Druck ausüben: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
- Geschwindigkeit erhöhen: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
- Nähen einstellen: Release pressure from the pedal to stop the machine.
4. Pflege und Wartung
Proper care ensures the longevity and reliable performance of your foot controller.
- Reinigung: Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
- Lagerung: When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
- Inspektion: Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.
5. Fehlerbehebung
If you encounter issues with your foot controller, refer to the following common problems and solutions.
5.1. Sewing Machine Does Not Power On
- Verbindungen prüfen: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
- Leistung überprüfen: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
- Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.
5.2. No Speed Control or Machine Runs at Full Speed
- Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
- Internes Problem: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.
5.3. Intermittent Power or Operation
- Kabelschaden: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
- Lose Verbindungen: Re-seat all connections, ensuring they are firm and secure.
6. Produktspezifikationen
| Spezifikation | Detail |
|---|---|
| Marke | SINGER |
| Modellnummer | 359102001 |
| Technische Daten | 6.1 x 4.7 x 2.1 Zoll |
| Artikelgewicht | 10.6 Unzen |
| Material | Plastik |
| Hersteller | Sänger |
| ASIN | B002L2Z73A |
| UPC | 798804837419, 037431889041 |
| Batterien erforderlich | NEIN |
7. Garantie und Support
For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER webWebsite.
You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.
