Bedienungsanleitung für das Eclipse3 Algenbekämpfungssystem

Produkt überview

The Eclipse3 Algae Control System is an all-natural mineral treatment designed for swimming pool water. It effectively eliminates algae growth, reduces the need for chlorine, and clarifies pool water, all while assisting in maintaining a proper pH level. Its unique pre-kelated formula helps control algae blooms and lessens the demand on your pool's sanitizer, leading to potential cost savings. This product also contains clarifying agents and natural pH balancers to simplify water chemistry management.

The image displays the Eclipse3 Algae Control System in an 8.8 lb white bucket. The label highlights key features such as 'Granular/Powder Algicide for Control of Algae', 'Reduces Chlorine Use', 'Controls Algae', 'Clarifies Water', and 'Stabilizes pH'. It also lists 'Copper Sulfate Pentahydrate' as an active ingredient and includes a 'CAUTION: KEEP OUT OF REACH OF CHILDREN' warning.

Sicherheitshinweise

Always read and follow all directions and precautions on the product label before use. Keep this product out of reach of children and pets. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water. Do not ingest. If swallowed, seek immediate medical attention. Store in a cool, dry place away from incompatible materials and direct sunlight. Ensure proper ventilation when handling the product.

Einrichtung und Vorbereitung

Before applying Eclipse3, ensure your pool water is properly balanced. Test your pool's pH, alkalinity, and calcium hardness levels. Adjust them to the recommended ranges as necessary. Clean your pool thoroughly, removing any debris, leaves, or visible algae. Ensure your filtration system is running efficiently.

Bedienungsanleitung

Dosierungsinformationen

Eclipse3 is a granular/powder algicide. Apply the product directly to the pool water, preferably near the return jets to aid in dispersion. Allow the product to circulate for several hours before adding chlorine or other sanitizers.

• Start-Up Dosage: For initial treatment or severe algae conditions, use 20 ounces (oz.) of Eclipse3 per 10,000 gallons of pool water.
• Erhaltungsdosis: For ongoing prevention and water clarity, use 1.25 ounces (oz.) of Eclipse3 per 10,000 gallons of pool water per week.

Always measure accurately to ensure effective treatment and avoid over-dosing.

Wartung

Consistent use of Eclipse3 as per the maintenance dosage will help keep your pool water clear and free of algae. Continue regular pool maintenance practices, including:

• Regularly testing and balancing water chemistry (pH, alkalinity, chlorine levels).
• Brushing pool walls and floor to prevent algae attachment.
• Vacuuming the pool as needed.
• Cleaning or backwashing your pool filter regularly.

Fehlerbehebung

If you experience persistent algae growth or water clarity issues despite using Eclipse3, consider the following:

• Falsche Dosierung: Ensure you are applying the correct amount of product based on your pool's volume.
• Water Chemistry Imbalance: Re-test all water parameters (pH, alkalinity, chlorine, etc.) and adjust as necessary. Imbalanced water can hinder the effectiveness of treatments.
• Poor Circulation/Filtration: Verify that your pool pump and filter are operating correctly and for sufficient periods. Good circulation is vital for chemical distribution and debris removal.
• Heavy Bather Load/Environmental Factors: High usage or extreme weather conditions (e.g., heavy rain, high temperatures) may require more frequent testing and adjustments.

For persistent issues, consult with a professional pool technician.

Produktspezifikationen

Garantie und Support

For information regarding product warranty, technical support, or any other inquiries, please contact Eclipse customer service. Refer to the product packaging for specific contact details or visit the official Eclipse webWebsite.

WebWebsite: www.eclipse3.com