Incase Monochrome Slider Case User Manual

1. Produktüberschreitungview

The Incase Monochrome Slider Case provides durable protection for your iPhone 3GS or iPhone 3G. Constructed from hardshell plastic, it features a minimal wall thickness while offering shock absorption and protection against impacts and scratches through interior rubber guardrails.

Hauptmerkmale

• Leichtbauweise
• Durable hardshell construction
• Interior rubber guardrails for shock absorption
• Direct access to all device features

Packungsinhalt

• Incase Monochrome Slider Case (CL59233-B)

2. Einrichtungsanweisungen

Follow these steps to properly install your Incase Slider Case onto your iPhone 3GS or iPhone 3G.

1. Trennen Sie das Gehäuse: The Incase Slider Case consists of two parts: a top section and a bottom sliding section. Gently slide the bottom section downwards to separate it from the main body of the case.
2. Insert iPhone: Carefully place your iPhone 3GS or iPhone 3G into the top section of the case, ensuring it seats correctly and aligns with the cutouts for buttons and ports.
3. Reattach Bottom Section: Slide the bottom section of the case upwards along the rails until it securely clicks into place with the top section. Ensure there are no gaps and the phone is fully enclosed.

3. Bedienungsanleitung

Once installed, the Incase Slider Case allows full functionality of your iPhone 3GS or iPhone 3G.

• Access to Ports and Buttons: The case is designed with precise cutouts, ensuring direct access to the charging port, headphone jack, volume buttons, silent switch, and power button without needing to remove the case.
• Kamerafunktionalität: The camera and flash remain fully operational through the dedicated cutout on the back of the case.
• Docking Compatibility: For docking with certain accessories, the two-piece slider design allows for easy removal of the bottom section, facilitating direct connection to docks that require an unobstructed bottom port.

4. Pflege und Wartung

To ensure the longevity and appearance of your Incase Slider Case, follow these care guidelines:

• Reinigung: Reinigen Sie das Gehäuse regelmäßig mit einem weichen, fusselfreien Tuch.amp cloth. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the finish.
• Vermeiden Sie extreme Bedingungen: Setzen Sie das Gehäuse keinen extremen Temperaturen, direkter Sonneneinstrahlung über längere Zeiträume oder ätzenden Substanzen aus.
• Inspektion: Periodically inspect the case for any signs of wear or damage. While durable, severe impacts can compromise its protective integrity.

5. Fehlerbehebung

If you encounter any issues with your Incase Slider Case, consider the following common solutions:

• Gehäuse passt nicht richtig: Ensure you have the correct model (iPhone 3GS or iPhone 3G). Verify that the bottom slider section is fully engaged and clicked into place. Remove any debris from the phone or inside the case that might obstruct a proper fit.
• Difficulty Removing Bottom Section: Apply gentle, even pressure when sliding the bottom section off. Avoid excessive force. If it feels stuck, ensure no foreign objects are lodged between the two parts.
• Buttons or Ports Obstructed: Double-check that your iPhone is correctly seated within the case and aligned with all cutouts. If misalignment occurs, remove the phone and re-install it carefully.

6. Produktspezifikationen

7. Garantie und Support

Incase products are designed for quality and durability. For specific warranty information regarding your Incase Monochrome Slider Case, please refer to the official Incase webBesuchen Sie die Website oder kontaktieren Sie direkt deren Kundendienst.

Kundendienst: For further assistance, technical support, or warranty claims, please visit the official Incase support page or contact their customer service department. Contact details can typically be found on the manufacturer's webWebsite.

Online-Ressourcen: Visit the Incase Store on Amazon