Mount Plus PL-223 Full Motion TV Monitor Wall Mount Bracket

Einführung

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Mount Plus PL-223 Full Motion TV Monitor Wall Mount Bracket. This mount is designed to securely hold most 13-inch to 43-inch flat screen TVs and monitors with VESA patterns up to 200x200mm and weighing up to 44 lbs (20 kg). It offers full motion capabilities including tilt, swivel, and vertical rotation for optimal viewFlexibilität ein.

Bild: Front view of the Mount Plus PL-223 full motion TV wall mount bracket, showcasing its articulating arms and VESA plate.

Sicherheitshinweise

• Gewichtskapazität: Die maximale Tragfähigkeit von 20 kg (44 lbs) darf nicht überschritten werden. Eine Überschreitung dieser Grenze kann zu schweren Verletzungen oder Sachschäden führen.
• Bildschirmgröße: This mount is suitable for TVs and monitors between 13 and 43 inches.
• VESA-Kompatibilität: Ensure your TV's VESA mounting pattern (distance between mounting holes) is compatible with 100x100mm, 200x100mm, or 200x200mm.
• Wandstruktur: The wall must be capable of supporting the combined weight of the mount and your TV. For wood stud installation, ensure the mount is securely fastened to the center of a single wood stud. For concrete or brick walls, appropriate anchors (not always included) must be used. Consult a professional if unsure about your wall's integrity.
• Installation: Read all instructions carefully before installation. If you have any doubts, seek professional assistance. Improper installation can lead to equipment damage or personal injury.
• Bewegliche Teile: Halten Sie Hände und Finger während der Justierung von beweglichen Teilen fern, um ein Einklemmen zu vermeiden.

Packungsinhalt

Bitte prüfen Sie vor der Installation, ob alle Komponenten vorhanden und unbeschädigt sind. Sollten Teile fehlen oder beschädigt sein, kontaktieren Sie bitte umgehend unseren Kundendienst.

• Wandplattenbaugruppe
• TV-VESA-Platte
• Mounting Hardware (various screws, washers, spacers for TV and wall attachment)
• Bedienungsanleitung

Erforderliche Werkzeuge

• Bleistift
• Maßband
• Ebene
• Balkensucher (für die Montage von Holzständern)
• Electric Drill with appropriate drill bits
• Kreuzschlitzschraubendreher
• Steckschlüssel (für Holzschrauben)

Setup and Installation Instructions

Follow these steps carefully to install your Mount Plus PL-223 wall mount.

1. Schritt 1: Bereiten Sie die Wand vor

   Use a stud finder to locate the center of a wood stud at your desired mounting height. Mark the drilling points for the wall plate. Ensure the marks are level using a spirit level. For concrete or brick walls, mark the drilling points and use a masonry drill bit to create pilot holes for appropriate anchors (not included).

2. Schritt 2: Installieren Sie die Wandplatte

   Position the wall plate over the marked pilot holes. Secure the wall plate to the wall using the provided lag bolts. Ensure the bolts are tightened firmly into the stud. Do not overtighten.

   

   Bild: Eine Seite view of the Mount Plus PL-223 wall mount with an attached TV, illustrating the articulating arm extended from the wall plate.
3. Step 3: Attach the VESA Plate to the TV

   Identify the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes. Attach the VESA plate to the back of your TV. The detachable VESA plate design allows for easier installation.

   

   Bild: Eine Nahaufnahme view of the Mount Plus PL-223 mount, highlighting the detachable VESA plate for easy TV attachment and the integrated cable management clips.

4. Step 4: Mount the TV to the Arm

   Carefully lift the TV (with the VESA plate attached) and hook it onto the articulating arm of the wall mount. Ensure the VESA plate is securely seated on the arm. Tighten any safety screws or bolts to prevent accidental dislodging.
5. Schritt 5: Kabelmanagement

   Route your TV's cables through the integrated cable management clips on the articulating arm to maintain a tidy appearance and prevent cable damage.

Bedienungsanleitung

The Mount Plus PL-223 offers various adjustments for optimal viewing.

• Neigungseinstellung: The TV can be tilted from +5 degrees (upward) to -15 degrees (downward) to reduce glare and achieve a comfortable viewing angle. Loosen the tilt adjustment knobs, set the desired angle, and then re-tighten the knobs.
• Schwenkeinstellung: The articulating arm allows for a 180-degree swivel, enabling you to turn your TV left or right to face different areas of a room. Gently push or pull the TV to the desired swivel angle.
• Vertical Rotation (Landscape to Portrait): This mount supports a 90-degree rotation, allowing you to switch your display between landscape (horizontal) and portrait (vertical) orientations. This feature is particularly useful for specific applications like digital signage or viewing vertical content from smartphones.


Bild: A diagram showing the Mount Plus PL-223 mount's range of motion, including tilt from +5 to -15 degrees, swivel of ±90 degrees, and rotation of ±90 degrees.

• Verlängerung von der Wand: The mount can retract to a low profile of 2.4 inches (66mm) from the wall and extend up to 15 inches (370mm) for flexible positioning.


Bild: A visual representation of the Mount Plus PL-223 mount's extension capabilities, showing it can extend from 2.6 inches (66mm) to 14.6 inches (370mm) from the wall.



Bild: Ein Example of a TV mounted on the PL-223, rotated 90 degrees to display content in portrait orientation.

Wartung

Regelmäßige Wartung trägt zur Langlebigkeit und zum sicheren Betrieb Ihrer TV-Halterung bei.

• Regelmäßige Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Bolzen, um sicherzustellen, dass sie fest sitzen. Lose Verbindungen können die Stabilität beeinträchtigen.
• Reinigung: Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln, die die Oberfläche beschädigen könnten.
• Schmierung: Moving parts are designed for smooth operation. If any movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.

Fehlerbehebung

• TV sags forward or does not hold tilt: Ensure the tilt adjustment knobs or bolts are fully tightened. Some TVs, especially older or heavier models near the weight limit, may require extra tightening.
• Connections on TV are blocked by the VESA plate: If the VESA plate obstructs ports, consider using spacers (if available in your hardware kit or purchased separately) between the TV and the VESA plate to create clearance. Angled HDMI or power adapters may also be helpful.
• Mount feels wobbly after installation: Double-check that all wall mounting bolts and TV attachment screws are securely tightened. Ensure the wall plate is firmly anchored to a structural stud.
• Difficulty rotating the TV: Ensure no cables are snagged or preventing movement. Check for any adjustment screws that might need to be loosened slightly before rotation and re-tightened afterward.

Technische Daten

Bild: A diagram illustrating the Mount Plus PL-223 mount with an optional detachable extension plate, indicated by dashed lines, which can be used to extend VESA compatibility for certain larger TVs.

Garantie und Support

Mount Plus products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Mount Plus webBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.