JBL GT5-10D 10-Inch Dual-Voice-Coil Subwoofer User Manual

1. Einleitung

The JBL GT5-10D is a 10-inch dual-voice-coil subwoofer designed for car audio systems. It features a vented motor structure and is engineered to deliver robust bass performance. This manual provides essential information for the proper setup, operation, and maintenance of your subwoofer.

Abbildung 1: Vorderseite view of the JBL GT5-10D Subwoofer.

Zu den Hauptmerkmalen gehören:

• 10-inch Dual 4 Ohm GT5 Series Subwoofer
• Peak Power Handling: 1100 watts
• RMS Power Handling: 275 watts
• Recommended power range: 150 - 275 watts RMS
• Polypropylene woofer cone material
• Rubber-coated tinsel leads for enhanced durability
• Proprietary steel frame

2. Einrichtung und Installation

Proper installation is crucial for optimal performance and longevity of your JBL GT5-10D subwoofer. It is recommended that installation be performed by a qualified car audio professional.

2.1 Anforderungen an das Gehäuse

The subwoofer is designed to operate within a suitable enclosure. Consult the specifications section for recommended enclosure volumes and types. Ensure the enclosure is robust and sealed properly to prevent air leaks, which can degrade sound quality.

Figure 2: Subwoofer dimensions for enclosure planning. The subwoofer measures 12"D x 12"W x 10"H.

2.2 Wiring the Dual Voice Coils

The GT5-10D features dual 4-ohm voice coils, allowing for flexible wiring configurations to match your amplifier's impedance requirements. Common configurations include:

• Parallelverdrahtung: Connect both voice coils in parallel for a 2-ohm load. This configuration typically draws more power from the ampschwerer.
• Reihenschaltung: Connect both voice coils in series for an 8-ohm load. This configuration draws less power and is suitable for amplifiers that are not 2-ohm stable.

Always refer to your amplifier's manual for compatible impedance loads and wiring diagrams. Incorrect wiring can damage both the subwoofer and the ampschwerer.

Abbildung 3: Seite view of the subwoofer, illustrating the terminal connections for wiring.

2.3 Stromanschluss

Schließen Sie den Subwoofer an einen geeigneten amplifier using high-quality speaker wire. Ensure proper polarity (+ to + and - to -) to avoid phase issues that can negatively impact sound quality. The subwoofer is designed for wired connectivity, typically via RCA inputs from your head unit to the amplifier, and then speaker wire from the ampLautsprecher zum Subwoofer.

3. Bedienungsanleitung

Once installed and wired correctly, the JBL GT5-10D subwoofer will enhance your car audio system's bass response. The primary control for the subwoofer will be through your car's head unit or external amplifier-Steuerungen.

3.1 Initial Power-Up and Adjustment

1. Ensure all connections are secure before powering on your audio system.
2. Beginnen Sie mit dem amplifier's gain control set to its minimum (lowest) setting.
3. Play a piece of music with a good bass range.
4. Erhöhen Sie langsam die ampDie Verstärkung des Verstärkers so lange erhöhen, bis der gewünschte Basspegel ohne Verzerrungen erreicht ist.
5. Stellen Sie den Tiefpassfilter (LPF) an Ihrem Gerät ein. ampUm den Subwoofer-Ausgang nahtlos mit dem Klang Ihrer Hauptlautsprecher zu mischen, benötigen Sie einen Verstärker oder ein Autoradio. Ein üblicher Ausgangspunkt liegt bei etwa 80–100 Hz.
6. If your system includes a phase control, experiment with 0° and 180° settings to find the one that provides the most impactful and coherent bass.

While the product specifications mention "Touch" as a control method, for a passive subwoofer like the GT5-10D, this typically refers to controls on the connected amplifier or head unit, not directly on the subwoofer itself.

4. Wartung

The JBL GT5-10D subwoofer is built for durability, but proper care will ensure its long-term performance.

• Reinigung: Wischen Sie die Membran und die Sicke des Subwoofers mit einem weichen, trockenen Tuch ab. Vermeiden Sie aggressive Chemikalien oder übermäßige Feuchtigkeit.
• Inspektion: Periodically check the speaker terminals and wiring for any signs of corrosion or loose connections. Ensure the rubber-coated tinsel leads are intact, as they protect against wear.
• Umweltfaktoren: While designed for car environments, extreme temperatures and direct sunlight can affect performance over time. Ensure adequate ventilation around the subwoofer.

5. Fehlerbehebung

If you experience issues with your JBL GT5-10D subwoofer, refer to the following common problems and solutions:

Sollten die Probleme weiterhin bestehen, wenden Sie sich an einen professionellen Auto-Audio-Techniker.

6. Spezifikationen

7. Understanding Your Subwoofer (Video)

This video provides additional insights into the design and technology behind JBL and Infinity speakers, including concepts relevant to your subwoofer's performance, such as materials and cone design.

8. Garantie und Support

The JBL GT5-10D subwoofer comes with a standard manufacturer's warranty. Please refer to the warranty documentation included with your product for specific terms, conditions, and registration information. For technical support or service inquiries, please contact JBL customer service or visit the official JBL webWebsite.

Manufacturer: Harman Kardon