Eheim 3616090

EHEIM Jäger Aquarium-Thermostat-Heizgerät 150W Bedienungsanleitung

Model: 3616090 | Brand: Eheim

Einführung

The EHEIM Jager Aquarium Thermostat Heater 150W is designed to provide precise and reliable temperature control for your aquarium. All EHEIM Heater models are 100% fully submersible and feature a TruTemp dial for accurate temperature recalibration. This manual provides essential information for the safe and effective use of your heater.

Produkteigenschaften

Installationsanweisungen

Before initial use, please read the full user guide PDF for detailed instructions. Below are general steps for setting up your EHEIM Jager Heater:

  1. Auspacken: Carefully remove the heater from its packaging. Inspect for any visible damage.
  2. Platzierung: Position the heater vertically and fully submerged in your aquarium. Ensure it is placed in an area with good water circulation for even heat distribution. Use the included suction cups to secure it to the aquarium glass.
  3. Temperatureinstellung: Use the TruTemp dial at the top of the heater to set your desired water temperature. It is recommended to use an external thermometer to verify the actual water temperature and fine-tune the heater setting if necessary.
  4. Eingewöhnung: Allow the heater to acclimate to the aquarium water temperature for at least 20-30 minutes before plugging it in.
  5. Stromanschluss: Plug the heater into a grounded electrical outlet. The indicator light will illuminate when the heater is actively heating.
EHEIM Jager Aquarium Thermostat Heater 150W in its packaging.

Figure 1: The EHEIM Jager Aquarium Thermostat Heater 150W shown in its original packaging, highlighting its design and robust construction.

EHEIM Jager Aquarium Thermostat Heater 150W with 14 inch (34 cm) dimension marking.

Figure 2: A visual representation of the EHEIM Jager Aquarium Thermostat Heater, indicating its length of 14 inches (34 cm), which is important for tank placement.

Bedienungsanleitung

Once installed and powered on, the EHEIM Jager Heater will automatically maintain the set temperature. The internal thermostat will cycle the heating element on and off as needed. The indicator light will show when the heater is actively heating.

Wartung

Proper maintenance ensures the longevity and efficiency of your heater. Always unplug the heater and allow it to cool completely before handling or performing any maintenance.

Fehlerbehebung

If you encounter issues with your EHEIM Jager Heater, consider the following common troubleshooting steps:

ProblemMögliche UrsacheLösung
Heater not heating / Indicator light off
  • Nicht angeschlossen oder ausgeschaltettage.
  • Temperatur zu niedrig eingestellt.
  • Fehlfunktion der Heizung.
  • Thermo safety control activated (low water level).
  • Überprüfen Sie den Stromanschluss und die Steckdose.
  • Temperatureinstellung erhöhen.
  • Check water level; if low, refill and allow heater to reset.
  • If still not working, heater may need replacement.
Wassertemperatur zu hoch/zu niedrig
  • Falsche Temperatureinstellung.
  • Heizwassertage unzureichend/übermäßig für die Tankgröße.
  • Schlechte Wasserzirkulation.
  • Fehlfunktion der Heizung.
  • Adjust TruTemp dial gradually.
  • Stellen Sie sicher, dass die Heizung funktionierttage matches tank volume.
  • Improve water circulation (e.g., with a filter or powerhead).
  • If persistent, heater may need replacement.

For more complex issues, refer to the official user guide or contact Eheim customer support.

Technische Daten

AttributWert
MarkennameEheim
Artikelmodellnummer3616090
Wastage150 Watt
Artikelgewicht0.72 Pfund (11.5 Unzen)
Artikelabmessungen (LxBxH)1.42 x 13.58 Zoll
MaterialGlas
FarbeSilber, Schwarz
HerstellerEheim
Datum der ersten Verfügbarkeit25. Juni 2004

Garantie und Support

For detailed warranty information and customer support, please refer to the official EHEIM user guide PDF available for download or visit the Eheim webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.

Offizielles Benutzerhandbuch (PDF): Hier herunterladen

Zugehörige Dokumente - 3616090

Vorview EHEIM thermocontrol: Bedienungsanleitung für Aquarienheizer
Umfassende Bedienungsanleitung für den EHEIM thermocontrol Aquarienheizer (25-300W). Enthält Installations-, Bedienungs- und Sicherheitshinweise für eine optimale Aquarienpflege.
Vorview EHEIM aquaclass Bedienungsanleitung
Umfassende Bedienungsanleitung für die EHEIM aquaclass Aquarien-Kombination, einschließlich Einrichtung, Betrieb und Wartung. Erfahren Sie alles über Installation, Beleuchtung und Pflege.
Vorview EHEIM thermocontrole: Bedienungsanleitung für Aquarium-Reglerheizer
Umfassende Bedienungsanleitung für die EHEIM thermocontrole Serie von Aquarium-Reglerheizern (Modelle 3631-3640), die Installation, sicheren Betrieb und Wartung abdeckt.
Vorview EHEIM LEDcontrol+ 4200140: Präzise Aquarienbeleuchtungssteuerung
Entdecken Sie das EHEIM LEDcontrol+ (Modell 4200140), ein fortschrittliches Steuergerät zur individuellen Programmierung von Lichtfarbe und Helligkeit Ihrer Aquarienbeleuchtung. Ideal für EHEIM powerLED+ Leuchten.
Vorview EHEIM Thermocontrol Aquariumheizung – Benutzerhandbuch
Offizielle Bedienungsanleitung für den EHEIM-Thermostat-Aquarienheizer (25–300 W). Diese Anleitung behandelt Installation, Betrieb, Sicherheitshinweise und technische Daten, um optimale und stabile Wassertemperaturen für die Bewohner Ihres Aquariums zu gewährleisten.
Vorview EHEIM RGBcontrol+ Bedienungsanleitung
Dieses Dokument enthält Bedienungsanleitungen, Sicherheitshinweise, Installationsanleitungen und technische Spezifikationen für das Gerät EHEIM RGBcontrol+, das für die präzise Steuerung von RGB-Beleuchtungssystemen in Aquarien entwickelt wurde.