Ravelli AVTP Professional 55" 65mm Videokamerastativ – Benutzerhandbuch

Einführung

Thank you for choosing the Ravelli AVTP Professional Video Camera Tripod. This manual provides essential information for the safe and effective use of your new equipment. Please read these instructions thoroughly before operation and retain them for future reference.

Lieferumfang

• Stativbeine
• Tripod Head (Fluid Drag Head)
• Schnellwechselplatte
• Carry Bag

Technische Daten

Abbildung 1: Visual representation of the Ravelli AVTP Tripod's dimensions, including its collapsed length (28.5"), minimum operating height (27"), and maximum operating height (54.5").

Aufstellen

1. Das Stativ auspacken: Carefully remove all components from the carry bag.
2. Beine ausstrecken: Loosen the leg lock adjustment knobs on each leg section. Extend the legs to your desired height. Ensure all leg sections are securely locked by tightening the adjustment knobs.
   

   Abbildung 2: Detail of the leg lock adjustment knob, used to secure the tripod legs at the desired height.
3. Beinwinkel anpassen: The tripod features professional 3-segment interlocking crutch-type legs. Adjust each leg's angle independently for stability on uneven terrain.
4. Level the Tripod Head: The fluid drag head is mounted on a 75mm bowl. Use the integrated bubble level to ensure the head is perfectly level before attaching your camera. Adjust the leveling knob at the base of the head until the bubble is centered.
   

   Abbildung 3: The fluid head showing the integrated bubble level for precise leveling of the camera platform.

5. Attach Quick Release Plate to Camera: Secure the quick release plate to the bottom of your camera using the screw provided. Ensure it is tightly fastened.
   

   Abbildung 4: The quick release plate mechanism on the fluid head, ready to accept a camera.
6. Kamera am Stativ befestigen: Slide the quick release plate (with camera attached) into the receiver on the fluid head. Engage the integrated safety lock to prevent accidental detachment.

Bedienungsanleitung

Fluid Drag Head Operation

The fluid drag head allows for smooth and controlled camera movements. It features dual adjustable panning arms for comfortable operation.

• Panning (Horizontal Movement): Loosen the pan lock knob to allow 360° horizontal rotation. Adjust the tension for desired drag. Tighten the knob to lock the pan movement.
• Tilting (Vertical Movement): Loosen the tilt lock knob to allow 180° vertical movement (90° forward, 90° downward). Adjust the tension for desired drag. Tighten the knob to lock the tilt movement.

Abbildung 5: The fluid drag head with its dual panning arms, designed for smooth camera control.

Monopod Functionality

One of the tripod legs can be detached and used as a monopod for increased portability and flexibility in certain shooting scenarios.

1. Detaching the Monopod Leg: Identify the leg with the padded grip. Unscrew the leg from the tripod chassis.
2. Attaching the Head to Monopod: The center column or a separate head can be attached to the detached leg.
3. Using the Monopod: Extend the monopod to the desired height and secure the locks. Use it to stabilize your camera for quick shots or in confined spaces.

Wartung

• Reinigung: Wischen Sie das Stativ nach jedem Gebrauch mit einem weichen, trockenen Tuch ab. Bei hartnäckigem Schmutz verwenden Sie ein Reinigungsmittel.amp Mit einem Tuch und milder Seife abwischen und anschließend gründlich trocknen. Scharfe Chemikalien vermeiden.
• Schmierung: Der Fluidkopf ist für einen reibungslosen Betrieb ausgelegt und benötigt in der Regel keine Schmierung durch den Benutzer. Sollten die Bewegungen schwergängig werden, wenden Sie sich bitte an einen Fachmann.
• Lagerung: Store the tripod in its provided carry bag in a cool, dry place away from extreme temperatures and humidity.
• Inspektion: Überprüfen Sie regelmäßig alle Schrauben, Knöpfe und Beinverriegelungen auf festen Sitz. Ziehen Sie lose Teile fest, um einen sicheren Betrieb zu gewährleisten.

Fehlerbehebung

• Stiff Pan/Tilt Movement: Ensure all lock knobs for pan and tilt are fully loosened. If movement remains stiff, check for any obstructions or debris. Persistent stiffness may indicate an internal issue requiring professional service.
• Instabilität des Stativs: Ensure all leg sections are fully extended and their respective lock knobs are securely tightened. Verify that the leg angles are set appropriately for the terrain. For heavy loads, consider adding a counterweight to the hook located at the bottom of the center column (if applicable).
• Camera Not Secure on Head: Confirm the quick release plate is correctly attached to your camera and fully seated in the fluid head's receiver. Ensure the safety lock mechanism is engaged.

Garantie und Support

The Ravelli AVTP Professional Tripod comes with a 10 Jahr Herstellergarantie. For warranty claims, technical support, or service inquiries, please contact Ravelli customer service. Retain your proof of purchase for warranty validation.

Wichtige Sicherheitsinformationen

Haftungsausschluss: Must be 18 years or older to order this product. Always ensure your camera and accessories are securely mounted before use. Do not exceed the maximum weight limit of 27 pounds. Use caution when adjusting the tripod on uneven surfaces to prevent tipping. Keep hands and fingers clear of moving parts during adjustment.

Verwandte Produkte & Zubehör

Enhance your workflow with compatible accessories. Consider the Ravelli ATD Professional Tripod Dolly for easy movement of your setup.

Abbildung 6: The Ravelli ATD Tripod Dolly, designed to easily move tripods, light stands, and background stands with a 37" spread and 45 lbs capacity.

Offizielle Produktvideos