Bedienungsanleitung für den Dorman 911-006 Kraftstoffstandsensor

Einführung

This manual provides essential information for the installation, operation, and maintenance of the Dorman 911-006 Fuel Level Sensor. This sensor is designed as a direct replacement for the original equipment on specified vehicles, ensuring accurate fuel level readings. Please read this manual thoroughly before proceeding with installation or troubleshooting.

Produkt überview

The Dorman 911-006 Fuel Level Sensor is engineered to match the fit and function of the original sensor. It is constructed from quality components to ensure reliable performance and extended service life.

Lieferumfang

• Füllsensor
• Float and Arm
• Delivery Module Gasket
• Steckverbinder-Verriegelungslaschen

Fahrzeugkompatibilität

This Dorman 911-006 Fuel Level Sensor is compatible with the following vehicle models. Always verify fitment using your vehicle's make, model, and trim level before installation.

• Chevrolet Cavalier: 2000, 2001, 2002, 2003, 2004, 2005
• Chevrolet Classic: 2004, 2005
• Chevrolet Malibu: 2000, 2001, 2002, 2003
• Oldsmobile Alero: 2000, 2001, 2002, 2003, 2004
• Pontiac Grand Am: 2000, 2001, 2002, 2003, 2004, 2005
• Pontiac Sunfire: 2000, 2001, 2002, 2003, 2004, 2005

Setup und Installation

Installation of a fuel level sensor typically involves working with the vehicle's fuel system. Due to the complexity and safety considerations, professional installation by a qualified technician is highly recommended.

General Installation Guidelines (Consult Service Manual for Specifics)

1. Um elektrische Gefahren zu vermeiden, stellen Sie sicher, dass die Fahrzeugbatterie abgeklemmt ist.
2. Den Kraftstoffsystemdruck gemäß den Vorgaben des Fahrzeugherstellers sicher abbauen.
3. Access the fuel tank. This may require lowering the fuel tank or accessing it from under the rear seat, depending on the vehicle model.
4. Disconnect the electrical connector from the old fuel level sensor.
5. Carefully remove the old sensor and gasket. Be prepared for residual fuel and have appropriate containment ready.
6. Install the new Dorman 911-006 Fuel Level Sensor with the provided new gasket, ensuring a proper seal to prevent leaks.
7. Connect the electrical connector securely to the new sensor.

8. Reassemble any removed components and reconnect the vehicle's battery.
9. Check for fuel leaks and verify proper operation of the fuel gauge by cycling the ignition and observing the fuel level indication.

Important Safety Note: Working with fuel systems can be dangerous. Ensure adequate ventilation and have a fire extinguisher readily available. Avoid sparks or open flames during the installation process.

Betrieb

The Dorman 911-006 Fuel Level Sensor operates by using a float mechanism that moves with the fuel level in the tank. This movement is translated into an electrical signal, which is then sent to the vehicle's fuel gauge, providing an accurate indication of the remaining fuel. There is no direct user interaction required for the operation of the sensor itself once installed.

Wartung

The Dorman 911-006 Fuel Level Sensor is designed for long-term, maintenance-free operation. Regular maintenance is generally not required for the sensor itself. However, ensuring the fuel system remains free of contaminants can help prolong the life and accuracy of all fuel system components, including the sensor.

• Use clean, high-quality fuel.
• Adhere to vehicle manufacturer's recommended fuel filter replacement intervals.

Fehlerbehebung

If you experience issues with your fuel gauge after installing the Dorman 911-006 Fuel Level Sensor, consider the following:

Häufige Probleme und Lösungen:

• Inaccurate Fuel Readings (e.g., always full, always empty, erratic):
  • Check electrical connections: Ensure the sensor's electrical connector is fully seated and free of corrosion.
  • Verify float arm movement: If accessible, confirm the float arm moves freely within the fuel tank without obstruction.
  • Inspect for damage: Check the sensor and float arm for any physical damage that might impede its function.
  • Consult vehicle service manual: There might be specific diagnostic procedures for your vehicle's fuel gauge system.
• Kraftstofflecks nach der Installation:
  • Re-check gasket installation: Ensure the new gasket is correctly seated and not pinched.
  • Verify locking ring/fasteners: Confirm the fuel pump module or sensor assembly is securely fastened to the tank.

If problems persist, it is recommended to consult a certified automotive technician for diagnosis and repair.

Technische Daten

Garantie und Support

Dorman products are backed by over a century of automotive experience and a commitment to quality. For specific warranty information or technical support, please refer to the official Dorman website or contact Dorman customer service directly.

You can find more information about Dorman products and support at their official store: Dorman Store on Amazon.