Brodit ProClip Instruction Manual

1. Einleitung

The Brodit ProClip is a custom-fit mounting bracket designed for specific vehicle dashboards. It provides a secure and accessible platform for attaching various devices such as mobile phone holders, PDA holders, or hands-free kits. The ProClip is engineered for easy installation without the need for special tools or dismantling of the vehicle's interior, ensuring no damage to the dashboard.

This manual provides detailed instructions for the installation, operation, and maintenance of your Brodit ProClip.

2. Wichtige Sicherheitshinweise

• Ensure the ProClip is securely installed before attaching any device.
• Do not obstruct airbags, vehicle controls, or driver's view with the installed device.
• Always follow local laws and regulations regarding device mounting in vehicles.
• Avoid distractions while driving. Adjust devices only when the vehicle is stationary.

3. Packungsinhalt

Bitte überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:

• Brodit ProClip (Model 804356)
• Installationsanleitung

4. Installationsanleitung

This ProClip is designed for the Toyota Prius (2009- models) and is intended for a left-mount position on the dashboard. The installation process is quick and does not require any special tools or modification of the vehicle's interior.

Installationsschritte:

1. Clean the installation area on the dashboard thoroughly to ensure a secure fit.
2. Locate the specific mounting points on your Toyota Prius dashboard as indicated in the detailed instructions provided with the ProClip.
3. Carefully insert the thin edge of the ProClip into the designated gap or seam on the dashboard.
4. Apply gentle pressure to snap the ProClip into place, ensuring it is firmly seated and stable.
5. Once the ProClip is secured, you can attach your device holder or other accessory to its flat surface.

Figure 1: Brodit ProClip (Model 804356) installed in a Toyota Prius dashboard, positioned to the left of the central air vent.

5. Bedienung

Once the Brodit ProClip is securely installed, it serves as a stable base for your device holder. Attach your specific device holder (e.g., for a mobile phone, GPS, or tablet) to the flat surface of the ProClip using the mounting screws or adhesive provided with your device holder. Ensure the device holder is also securely fastened to the ProClip before placing your electronic device.

6. Wartung

The Brodit ProClip requires minimal maintenance. To clean, simply wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic material. Periodically check the ProClip's attachment to the dashboard to ensure it remains secure.

7. Fehlerbehebung

Issue: ProClip feels loose after installation.

Mögliche Ursache: Not fully seated in the dashboard gap or incorrect positioning.

Lösung: Remove the ProClip and re-install it, ensuring it snaps firmly into place according to the specific instructions for your vehicle model. Verify that the correct ProClip model (804356) is being used for your Toyota Prius (2009-).

Issue: Device holder does not attach securely to ProClip.

Mögliche Ursache: Incompatible device holder or incorrect attachment method.

Lösung: Ensure your device holder is designed to be mounted on a flat surface like the ProClip. Follow the installation instructions provided with your device holder for proper attachment to the ProClip.

8. Spezifikationen

9. Garantie und Support

Brodit products are manufactured to high quality standards. For information regarding warranty coverage and terms, please refer to the warranty documentation included with your purchase or visit the official Brodit website. For technical support or further assistance, please contact Brodit customer service.

WebWebsite: www.brodit.com