Einführung
The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer is designed to automate your watering schedule, providing convenience and water conservation. This manual will guide you through the installation, programming, and maintenance of your new watering timer.
Figure 1: Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer.
Aufstellen
Setting up your Orbit watering timer is a straightforward process that requires no special tools. Follow these steps for proper installation:
- Einlegen der Batterie: Locate the battery compartment on the back of the timer. Insert two (2) 1.5V AAA alkaline batteries, ensuring correct polarity. The timer retains its program even when batteries are changed.
- An den Wasserhahn anbringen: Connect the timer to your outdoor hose faucet. The swivel coupling allows for quick and secure attachment without twisting the timer body. Ensure the connection is hand-tight to prevent leaks.
- Schlauch anschließen: Schließen Sie Ihren Gartenschlauch an den Auslass an der Unterseite der Zeitschaltuhr an.
Figure 2: Attaching the timer to a hose faucet.
Figure 3: The swivel coupling for easy attachment.
Bedienungsanleitung
The Orbit timer features an easy-to-use dial and a large digital display for simple programming. The dial cycles through various settings, allowing you to customize your watering schedule.
Programmierschritte:
- Uhr einstellen: Turn the dial to 'SET CLOCK'. Use the '+' and '-' buttons to set the current time.
- Startzeit: Turn the dial to 'START TIME'. Use the '+' and '-' buttons to select when you want watering to begin.
- Wie lang: Turn the dial to 'HOW LONG'. Use the '+' and '-' buttons to set the duration of each watering cycle (from 1 to 240 minutes).
- Wie oft: Turn the dial to 'HOW OFTEN'. Use the '+' and '-' buttons to set the frequency of watering (e.g., every 6 hours, 12 hours, or from once a day up to once every 7 days).
- Run Program (Auto): Turn the dial to 'AUTO'. The timer will now run according to your programmed schedule.
Figure 4: The large digital display and intuitive dial for easy programming.
Figure 5: Water frequencies can be set from every 6 hours to once every 7 days.
Figure 6: Set watering duration from 1 to 240 minutes.
Regenverzögerungsfunktion:
To conserve water during rainy periods, you can activate the rain delay feature. While the dial is set to 'AUTO', press the '+' button. This will pause your watering schedule for 24, 48, or 72 hours. The timer will automatically resume the program after the selected delay period.
Figure 7: Activating the rain delay feature.
Manuelle Bewässerung:
To water manually without interrupting your programmed schedule, press the 'MANUAL' button. You can then use the '+' and '-' buttons to set a manual watering duration. The timer will revert to its programmed schedule once the manual watering is complete.
Produkt überview Video:
Video 1: Ein überview of the Orbit Hose Faucet Timer's features and operation.
Wartung
To ensure the longevity and optimal performance of your Orbit watering timer, follow these maintenance guidelines:
- Batteriewechsel: Replace batteries annually or when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
- Temperaturüberlegungen: The timer is designed for outdoor use but should be protected from extreme temperatures. Do not operate at temperatures exceeding 120°F (49°C) or below 32°F (0°C).
- Winterlager: Before the first frost, remove the timer from the faucet, remove the batteries, and store it indoors in a location where temperatures remain above 32°F (0°C). Freezing temperatures can cause damage to the internal components.
- Reinigung: Periodically check the filter washer located in the timer's inlet for debris. Clean if necessary to maintain proper water flow.
Figure 8: Back of the timer with battery information and temperature warnings.
Fehlerbehebung
If you encounter issues with your Orbit watering timer, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Timer schaltet sich nicht ein oder das Display bleibt leer. | Defekte oder falsch eingesetzte Batterien. | Replace batteries with new 1.5V AAA alkaline batteries, ensuring correct polarity. |
| Die Bewässerungsuhr funktioniert nicht zum eingestellten Zeitpunkt. | Incorrect programming; low water pressure; rain delay active; manual mode active. | Verify programming steps. Ensure water faucet is fully open. Check if rain delay is active and disable if needed. Ensure timer is in 'AUTO' mode. |
| Aus den Anschlüssen tritt Wasser aus. | Loose connections; missing or worn washer; damaged threads. | Tighten connections. Check and replace rubber washer if damaged or missing. Ensure threads are not cross-threaded. |
| Timer does not shut off water. | Internal valve malfunction; debris in valve. | Try resetting the timer by removing batteries for 60 seconds. If problem persists, contact customer support. |
Technische Daten
- Modellnummer: AZ62061
- Farbe: Grün
- Material: Plastik
- Produktabmessungen: 5"T x 3"B x 5"H
- Artikelgewicht: 0.01 Unzen
- Anzahl der Einstellungen: 7
- Bildschirmgröße: 2 Zoll
- Erforderliche Batterien: Yes (2 x AAA)
- Maximaler Betriebsdruck: 100 PSI
- Betriebstemperaturbereich: 0 °C - 49 °C (32 °F - 120 °F)
- Ursprungsland: China
- UPC: 046878912137, 046878620612
Garantie und Support
The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer comes with a 6 Jahre Teilegarantie. Diese Garantie deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab.
For technical support, warranty claims, or additional information, please visit the official Orbit webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.
Weitere detaillierte Informationen finden Sie im offiziellen Benutzerhandbuch (PDF): Benutzerhandbuch herunterladen (PDF)
