Weiser SmartCode 5 Elektronisches Türschloss (9GED14900-001) Benutzerhandbuch

Einführung

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

Produkteigenschaften

• Schlüsselloser Zugang: Operate the deadbolt using a personalized code on the electronic keypad.
• SmartKey Re-key Technology: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• Verbesserte Sicherheit: Designed for exterior doors where robust security is essential.
• Langlebige Konstruktion: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Setup und Installation

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

Wichtige Installationsschritte:

1. Prepare the door and frame according to the provided template.
2. Montieren Sie den Riegel und das Schließblech.
3. Montieren Sie die externe Tastatureinheit.
4. Install the interior assembly, ensuring proper cable connection.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Perform the door handing process to calibrate the lock.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

Bedienungsanleitung

Abschließen der Tür:

• From Outside (Keypad): Press the 'Lock' button (the padlock icon) on the keypad.
• From Outside (Key): Insert your key and turn it to lock the deadbolt.
• Von innen: Turn the thumb turn on the interior assembly to the locked position.

Tür aufschließen:

• From Outside (Keypad): Enter your 4-8 digit user code. The deadbolt will retract.
• From Outside (Key): Insert your key and turn it to unlock the deadbolt.
• Von innen: Turn the thumb turn on the interior assembly to the unlocked position.

Benutzercodes programmieren:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. Öffnen Sie die Batterieabdeckung an der inneren Baugruppe.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. Press the 'Lock' button.
5. Enter a new 4-8 digit User Code.
6. Press the 'Lock' button.
7. Test the new user code to ensure it unlocks the door.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

Wartung

Batteriewechsel:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. Entfernen Sie die Batterieabdeckung von der Innenbaugruppe.
2. Entfernen Sie die alten Batterien.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. Setzen Sie die Batterieabdeckung wieder auf.

Reinigung:

Verwenden Sie zum Reinigen des Schlosses ein weiches,amp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

Fehlerbehebung

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• Schloss reagiert nicht: Prüfen Sie den Batteriestand und tauschen Sie die Batterie gegebenenfalls aus. Stellen Sie sicher, dass die Kabelverbindung zwischen Außen- und Inneneinheit fest sitzt.
• Tastenfeld leuchtet nicht: This usually indicates dead batteries. Replace all four AA batteries.
• Riegel fährt nicht vollständig aus/ein: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• User code not working: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser webWebsite.

Technische Daten

Garantie und Support

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Weiser-Kundendienst: Beachten Sie die Angaben auf Ihrer Produktverpackung oder die offizielle Weiser-Anleitung. webWebsite für aktuelle Kontaktinformationen.