dbx 223xs Stereo 2-Way, Mono 3-Way Crossover Instruction Manual

1. Produktüberschreitungview

The dbx 223xs crossover is designed to optimize audio performance by precisely separating frequency bands. It utilizes precision filters to direct correct frequencies to specific loudspeaker drivers, allowing amplifiers to operate more efficiently with usable signals, thereby reducing distortion and enhancing sound clarity for PA systems. This dual-channel crossover offers professional-grade features including Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, a 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Its robust design incorporates solid controls and high-quality XLR inputs and outputs.

2. Hauptmerkmale

• XLR balanced inputs and outputs for professional connectivity.
• Mode switch for flexible stereo 2-way or mono 3-way operation.
• Low frequency summed (subwoofer) output for enhanced bass management.
• x10 range switch on both channels for extended frequency control.
• 40Hz high pass (low cut) filter on both channels to remove unwanted low-end rumble.

3. Packungsinhalt

• dbx 223xs Crossover Unit
• Kurzanleitung

4. Bedienelemente und Anschlüsse

4.1 Frontplatte

The front panel of the dbx 223xs features controls for each channel, including input gain, 40Hz low cut filter, crossover frequency, and individual output gains for low and high frequencies. A mode switch allows selection between Stereo 2-Way and Mono 3-Way operation. The Subwoofer section includes its own crossover frequency and gain controls.

Image: Front panel of the dbx 223xs crossover, showing all control knobs and switches for Channel 1, Subwoofer, Mode, and Channel 2.

Image: Close-up of the crossover frequency knob and associated switches on the dbx 223xs, highlighting the frequency selection and x10 range switch.

4.2 Rückseite

The rear panel provides all audio input and output connections. It features balanced XLR inputs for Channel 1 and Channel 2, and balanced XLR outputs for Low, Mid (in 3-way mode), and High frequencies for each channel, as well as a dedicated Subwoofer output.

Image: Rear panel of the dbx 223xs crossover, displaying XLR input and output connectors for both channels, mode switches, and power input.

5. Einrichtung

The dbx 223xs crossover can be configured for Stereo 2-Way or Mono 3-Way operation. Proper setup ensures optimal sound distribution to your speakers and subwoofers, enhancing clarity and preventing distortion.

5.1 General Setup Principles

• Signalfluss: Connect your audio source (e.g., mixer) to the inputs of the 223xs.
• Ausgangsverbindungen: Connect the outputs of the 223xs to your respective amplifiers for low, mid (if applicable), and high frequency speakers.
• Einschaltsequenz: Always power on your audio source first, then the 223xs, and finally your amplifiers. When powering off, reverse this sequence.

5.2 Stereo 2-Way Crossover Setup

In Stereo 2-Way mode, the crossover splits the stereo input signal into two frequency bands (low and high) for each channel. This is ideal for systems with main speakers and subwoofers.

1. Connect the stereo outputs of your mixer to the KANAL 1 EINGANG Und KANAL 2 EINGANG on the rear panel of the dbx 223xs using balanced XLR cables.
2. Legen Sie die MODUS switch on the front panel to STEREO 2-WAY.
3. Verbinden Sie KLEINER OUTPUT of Channel 1 and Channel 2 to the inputs of your subwoofer amplifizierer.
4. Verbinden Sie HOHE LEISTUNG of Channel 1 and Channel 2 to the inputs of your main speaker amplifizierer.
5. Passen Sie die Übergangsfrequenz knobs for Channel 1 and Channel 2 to set the desired crossover point between your low and high frequency speakers. A common starting point is around 80-120 Hz for subwoofers.
6. Verwenden Sie die GEWINNEN knobs for Input, Low Output, and High Output to balance the levels between your speakers.
7. Aktivieren Sie die 40Hz LOW CUT filter if you wish to remove very low frequencies from your main speakers, especially if your subwoofers handle these frequencies.

5.3 Mono 3-Way Crossover Setup

In Mono 3-Way mode, the crossover splits a mono input signal into three frequency bands (low, mid, and high). This is suitable for systems requiring dedicated mid-range speakers in addition to lows and highs.

1. Connect a mono output from your mixer to the KANAL 1 EINGANG on the rear panel. The 223xs will sum the stereo input to mono internally if both inputs are used.
2. Legen Sie die MODUS switch on the front panel to MONO 3-WAY.
3. Verbinden Sie KLEINER OUTPUT to your low-frequency ampschwerer.
4. Verbinden Sie MID OUTPUT to your mid-range ampschwerer.
5. Verbinden Sie HOHE LEISTUNG to your high-frequency ampschwerer.
6. Passen Sie die Übergangsfrequenz knobs to define the separation points between low, mid, and high frequencies.
7. Verwenden Sie die GEWINNEN knobs for Input, Low Output, Mid Output, and High Output to achieve proper level balance.

5.4 Video zur Einrichtungsdemonstration

Watch this video for a detailed guide on setting up your dbx 223xs crossover (demonstrated with a similar RX230 model).

Video: A detailed guide on how to set up a Rockville RX230 crossover, demonstrating connections to amplifiers, subwoofers, and mixers, and explaining the function of various controls for optimal sound separation.

6. Betriebsarten

6.1 Stereo 2-Way Operation

In Stereo 2-Way mode, the 223xs processes two independent stereo channels. Each channel's input signal is divided into a low-frequency band and a high-frequency band. This allows for precise control over the audio sent to your main speakers and subwoofers, optimizing their performance and preventing frequency overlap.

6.2 Mono 3-Way Operation

In Mono 3-Way mode, the 223xs sums the stereo input to a mono signal and then divides it into three distinct frequency bands: low, mid, and high. This configuration is ideal for systems that utilize dedicated amplifiers and speakers for each of these frequency ranges, providing maximum control and clarity in a mono sound environment.

6.3 Supplementary Videos on Crossover Functionality

These videos demonstrate the functionality of similar crossover units, providing additional context on how to utilize such devices in various audio setups.

Video: A brief demonstration of a stereo crossover unit in an outdoor stage performance setting, highlighting its application in live sound.

Video: Ein überview of a professional 2/3 way stereo/4 way mono crossover, showcasing its features and potential applications in audio management.

Video: A demonstration of a 234XL Stereo 2/3 Way crossover, illustrating its controls and how it processes audio signals.

7. Wartung

• Reinigung: Verwenden Sie zum Reinigen des Geräts ein weiches, trockenes Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
• Belüftung: Sorgen Sie für ausreichende Belüftung rund um das Gerät, um eine Überhitzung zu vermeiden. Blockieren Sie die Belüftungsöffnungen nicht.
• Lagerung: Lagern Sie das Gerät an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.

8. Fehlerbehebung

• Kein Ton: Check all cable connections (inputs, outputs, power). Ensure all connected devices (mixer, amplifiers, speakers) are powered on and set to appropriate volume levels. Verify the MODE switch is correctly set.
• Verzerrung: Reduce input gain on the 223xs and/or your mixer. Check output gain levels to ensure they are not clipping your amplifiers. Verify crossover frequency settings are appropriate for your speakers.
• Ungleichmäßiger Klang: Adjust individual output gain controls for low, mid, and high frequencies to achieve a balanced sound. Check phase inversion switches if certain frequencies sound thin or out of phase.

9. Spezifikationen

10. Garantie und Support

The dbx 223xs Crossover comes with a Limited Warranty. For detailed warranty information, please refer to the included Quick Start Guide or contact dbx customer support.

For any questions, comments, or concerns regarding your dbx 223xs, please reach out to dbx customer support.