Olympus Pearlcorder S912 Mikro-Kassettenrekorder – Benutzerhandbuch

1. Einleitung

This manual provides detailed instructions for the proper use and maintenance of your Olympus Pearlcorder S912 Microcassette Recorder. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

Bild 1.1: Vorderseite view of the Olympus Pearlcorder S912 Microcassette Recorder. This image displays the compact design of the device, highlighting its primary controls and microcassette compartment.

2. Einrichtung

2.1. Einlegen der Batterie

1. Locate the battery compartment cover on the back or bottom of the recorder.
2. Schieben oder heben Sie den Deckel an, um das Fach zu öffnen.
3. Insert two (2) AA batteries, ensuring the correct polarity (+/-) as indicated inside the compartment. The device operates on 2 AA batteries (included) or an optional DC 3V adapter (not included).
4. Schließen Sie den Batteriefachdeckel fest.

2.2. Microcassette Loading

1. Press the Eject button (if present) or slide the cassette compartment door open.
2. Insert a microcassette tape with the open side facing the recorder's head assembly. Ensure the tape is seated correctly.
3. Close the cassette compartment door firmly until it clicks into place.

3. Bedienungsanleitung

3.1. Grundlegende Bedienelemente und Funktionen

• Spielen: Press the Play button to begin playback of a recorded microcassette.
• Stop: Press the Stop button to halt any ongoing operation (recording, playback, fast forward, rewind).
• Aufzeichnen: Press the Record button (often red) simultaneously with the Play button to begin recording. The LED record indicator will illuminate.
• Zurückspulen: Press the Rewind button to quickly move the tape backward.
• Review: During playback, press and hold the Rewind button to briefly review a section of the tape. Release to resume playback.
• Schneller Vorlauf: Press the Fast Forward button to quickly move the tape forward.
• Stichwort: During playback, press and hold the Fast Forward button to briefly cue forward through a section of the tape. Release to resume playback.
• Lautstärkeregelung: Rotate the volume dial or slide the volume switch to adjust the playback volume.

3.2. Aufzeichnung

1. Ensure a blank or desired microcassette is loaded.
2. Drücken Sie die Aufzeichnen und die Spielen button simultaneously. The LED record indicator will light up, signifying that recording is active.
3. Sprechen Sie deutlich in das eingebaute Mikrofon.
4. Um die Aufnahme zu stoppen, drücken Sie die Stoppen Taste.

3.3. Wiedergabe

1. Ensure a recorded microcassette is loaded.
2. Drücken Sie die Spielen Taste.
3. Passen Sie die Lautstärkeregelung auf Ihre gewünschte Lautstärke einstellen.
4. For private listening, connect earphones to the earphone socket.

3.4. Variable Speed Recording and Playback

The Pearlcorder S912 features 2 variable speed settings for both recording and playback. Consult the specific speed switch or dial on your device to select the desired speed. Higher speeds allow for longer recording times on a single tape, while lower speeds offer better audio fidelity.

4. Wartung

4.1. Reinigung

• Regularly clean the tape head and pinch roller with a cotton swab lightly dampwurde mit Isopropylalkohol behandelt, um eine optimale Klangqualität zu gewährleisten und Beschädigungen des Bandes zu vermeiden.
• Wipe the exterior of the recorder with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

4.2. Batteriepflege

• Entfernen Sie die Batterien, wenn das Aufnahmegerät längere Zeit nicht benutzt wird, um ein Auslaufen und Beschädigungen zu vermeiden.
• Tauschen Sie alle Batterien gleichzeitig gegen neue Batterien desselben Typs aus.

5. Fehlerbehebung

5.1. Häufige Probleme

• Kein Strom:
  • Prüfen Sie, ob die Batterien korrekt und mit der richtigen Polarität eingelegt sind.
  • Alte oder leere Batterien sollten durch neue ersetzt werden.
  • Ensure the DC adapter (if used) is properly connected and functional.
• Poor Sound Quality / No Sound:
  • Clean the tape head and pinch roller.
  • Passen Sie den Lautstärkeregler an.
  • Ensure the microcassette tape is not damaged or worn out.
  • If using earphones, ensure they are fully plugged in and functional.
• Aufnahme funktioniert nicht:
  • Ensure both the Record and Play buttons are pressed simultaneously.
  • Check if the microcassette has a record-protection tab broken off. If so, the tape cannot be recorded on.
  • Verify the LED record indicator illuminates during recording.
• Tape Not Moving:
  • Check if the microcassette is properly loaded and not jammed.
  • Stellen Sie sicher, dass die Batterien ausreichend geladen sind.

6. Spezifikationen

• Marke: OLYMPUS
• Modellnummer: LYSB005CRCZ6S-ELECTRNCS
• Produktabmessungen: 12.7 x 4.57 x 2.79 cm
• Artikelgewicht: 159 g
• Energiequelle: 2 AA batteries (required) or DC 3V adapter (not included)
• Mikrofon-Formfaktor: Eingebaut
• Mikrofon-Betriebsmodus: Stereo
• Hardware-Schnittstelle: USB (Note: Functionality may vary based on specific model variant or accessories)
• UPC: 050332403093

7. Garantie und Support

Your Olympus Pearlcorder S912 Microcassette Recorder is covered by a limited warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your purchase or visit the official Olympus support website. For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Olympus customer support through their official channels.