Orbit Mechanical Watering Hose Timer User Manual

Produkt überview

The Orbit Mechanical Hose Faucet Timer is an innovative and efficient solution for all your garden watering needs. This outdoor mechanical timer operates without batteries, making it reliable and hassle-free. Its oversized dial is easy to use, even with wet or gloved hands. Set your desired watering duration from 15 to 120 minutes, and the timer will automatically shut off for you. With a manual watering option, there's no need to remove the timer to use your faucet. It ensures efficient water usage, promotes sustainability, and takes the guesswork out of watering for residential homeowners, professional contractors, and avid growers.

Front view of the Orbit Mechanical Watering Hose Timer.

Hauptmerkmale

• Batterieloser Betrieb: No batteries required for operation, ensuring reliability and convenience.
• Einfach zu bedienendes Drehrad: Oversized dial with comfort grip allows for easy setting of watering duration from 15 to 120 minutes.
• Automatische Abschaltung: Timer automatically shuts off water flow after the set time expires.
• Manual Watering Option: Allows for immediate water flow without removing the timer from the faucet.
• Langlebige Konstruktion: Weather-proof design for outdoor use.

Visual representation of the Orbit Mechanical Watering Hose Timer.

Timed Watering

Keine Batterien erforderlich

Oversized Dial

Manuelle Bewässerung

Aufstellen

1. Inspect the Timer: Before installation, ensure the timer is free from any damage. Check the swivel coupling and filter for debris.
   

   Ensure the filter is clean before connecting.
2. Anschluss an den Wasserhahn: Screw the timer onto any standard outdoor faucet. Hand-tighten only to prevent damage. Ensure a snug fit to prevent leaks.
   

   Timer connected to an outdoor faucet, ready for use.

3. Schlauch anbringen: Connect your garden hose or watering system to the bottom outlet of the timer. Hand-tighten securely.
4. Wasser anstellen: Fully open the faucet to allow water pressure to the timer. The timer will not operate correctly without full water pressure.

Bedienungsanleitung

1. Setting Watering Duration:

   Rotate the oversized dial clockwise to your desired watering time. The dial is marked in minutes, from 15 to 120 minutes. The timer will begin watering immediately and automatically shut off when the set time expires.

   

   Key features for easy operation and setup.

2. Manual Watering (Continuous Flow):

   To use the faucet for continuous watering without setting a timer, simply push the small black tab located on the side of the dial downwards. This will enable continuous water flow. To stop manual watering, push the tab back up to its original position or rotate the dial to the "0" (OFF) position.

   

   Utilize the manual watering feature for immediate water access.

Wartung

• Reinigung des Filters: Periodically check the filter washer located in the swivel coupling for debris. Remove and rinse the filter under running water if clogged.
• Überwinterung: Before the first frost, remove the timer from the faucet. Drain all water from the timer and store it indoors in a dry, protected area to prevent freezing and damage.
• Allgemeine Pflege: Avoid dropping the timer or subjecting it to harsh impacts. Do not use abrasive cleaners on the timer.

Fehlerbehebung

Technische Daten

• Modell: 62034
• Marke: Orbit
• Material: Plastik
• Produktabmessungen: 4"T x 2"B x 2"H
• Artikelgewicht: 5.6 Unzen
• Bewässerungsdauer: 15 bis 120 Minuten
• Energiequelle: Mechanical (no batteries required)

Offizielles Produktvideo

Garantie und Support

For warranty information or technical support, please refer to the official Orbit website or contact their customer service. A user guide in PDF format is also available for download: Benutzerhandbuch (PDF).