Einführung
The Satco S6596 is a 55-watt T6 circline fluorescent light bulb designed for various lighting fixtures. This bulb provides 3000K warm white light with an 82 CRI (Color Rendering Index) and features a 4-pin base. Its dimensions are approximately 1.13 inches in width and 9.00 inches in height.
This manual provides essential information for the safe and correct installation, operation, and maintenance of your Satco S6596 light bulb.
Sicherheitshinweise
- Always disconnect power to the fixture before installing or replacing the bulb.
- Handle the bulb with care. Fluorescent bulbs are made of glass and can break if dropped or mishandled.
- Do not use this bulb in fixtures not designed for circline fluorescent bulbs or with incompatible ballasts. This bulb requires a compatible driver (ballast) to operate.
- Dispose of fluorescent bulbs according to local regulations, as they contain small amounts of mercury.
- Avoid touching the glass portion of the bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.
Packungsinhalt
- 1 x Satco S6596 Circline Fluorescent Light Bulb
Setup und Installation
- Stromabschaltung: Ensure the power supply to the lighting fixture is turned off at the circuit breaker before beginning installation.
- Alte Glühbirne entfernen (falls zutreffend): If replacing an existing bulb, carefully remove it from the fixture. Note how the old bulb was connected to ensure correct installation of the new one.
- Neue Glühbirne einsetzen: Align the 4-pin base of the Satco S6596 bulb with the receptacle in your fixture. Gently push the bulb into place until the pins are fully seated. The connector on this bulb is flat, which may differ from older bulbs with angled connectors. Ensure your fixture's wiring allows for a flexible connection.
- Sichere Glühbirne: If your fixture has retaining clips or brackets, ensure the bulb is securely held. Handle the bulb with care during this step, as it is fragile.
- Strom wiederherstellen: Sobald die Glühbirne sicher installiert ist, schalten Sie die Leuchte am Sicherungsautomaten wieder in die Stromversorgung ein.
- Prüfen: Schalten Sie den Lichtschalter ein, um zu überprüfen, ob die Glühbirne ordnungsgemäß funktioniert.
Image: The Satco S6596 circline fluorescent light bulb, showing its circular shape and 4-pin base connector.
Bedienungsanleitung
The Satco S6596 fluorescent bulb operates immediately upon receiving power from a compatible ballast. No special operating procedures are required beyond turning on the light switch connected to the fixture.
- Lichtleistung: Liefert 3800 Lumen Licht.
- Farbtemperatur: Emits a warm white light at 3000 Kelvin.
- Farbwiedergabe: Features an 82 CRI, indicating good color accuracy.
Wartung
- Reinigung: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
- Ersatz: Replace the bulb when it reaches the end of its life (average 12,000 hours) or if it begins to flicker or dim significantly. Follow the installation steps for replacement.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Glühbirne leuchtet nicht. | No power to the fixture, loose connection, faulty bulb, or faulty ballast. | Check power supply. Ensure bulb is fully seated. Test with a known working bulb. Inspect or replace ballast if necessary. |
| Birne flackert. | Loose connection, aging bulb, or failing ballast. | Ensure bulb is securely connected. Replace bulb if it's old. Inspect or replace ballast. |
| Bulb does not fit correctly. | Incompatible fixture or rigid wiring. | Verify fixture compatibility with a 4-pin circline T6 bulb. Ensure the fixture's power connector is flexible enough to accommodate the bulb's flat pin configuration. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | Satco |
| Modellname | Staffel 6596 |
| Lichtart | Fluoreszierend |
| Wastage | 55 Watt |
| Größe der Glühbirnenform | T6 (Circline) |
| Lampensockel | 4-Pin (Prong) |
| Lichtfarbe | Warmweiß |
| Farbtemperatur | 3000 Kelvin |
| Farbwiedergabeindex (CRI) | 82 |
| Helligkeit | 3800 Lumen |
| Durchschnittliches Leben | 12,000 Stunden |
| Bandtage | 120 Volt |
| Technische Daten | 1.13 Zoll B x 9 Zoll H |
| Material | Glas |
| Besonderheit | Work with Driver (Ballast) |
| GTIN | 045923065965 |
| ASIN | B0078MXZVO |
Garantie
This product comes with an average rated hour limited warranty. For specific warranty details and claims, please refer to the manufacturer's official documentation or contact Satco customer support.
Unterstützung
For further assistance, technical support, or inquiries regarding your Satco S6596 light bulb, please visit the official Satco webWebsite oder wenden Sie sich an die Kundendienstabteilung.
Hinweis: Für die genauesten und aktuellsten Supportinformationen konsultieren Sie bitte immer die vom Hersteller bereitgestellten neuesten Informationen.