1. Produktüberschreitungview
This manual provides instructions for the AL-KO 21-inch left-hand mower blade, a quality replacement part designed for AL-KO garden tractors. This blade is engineered for counter-clockwise rotation.
Wichtige Spezifikationen:
- Länge: 524 mm
- Axle Hole Diameter: 16.2 mm
- Side Hole Centers: 150 mm
- Replaces OEM-nr.: 521208
Image: AL-KO 21-inch Left-Hand Mower Blade, showing its general shape and design.
2. Sicherheitshinweise
Sicherheit hat beim Umgang mit Rasenmähermessern stets oberste Priorität. Die Nichtbeachtung dieser Anweisungen kann zu schweren Verletzungen führen.
- Stromversorgung trennen: Before performing any maintenance or installation, ensure the garden tractor engine is completely off and the spark plug lead is disconnected to prevent accidental starting.
- Schutzausrüstung tragen: Always wear heavy-duty work gloves to protect your hands from the sharp edges of the blade. Safety glasses are also recommended.
- Stabile Oberfläche: Work on a flat, stable surface. If lifting the tractor, ensure it is securely supported to prevent it from falling.
- Klingenschärfe: Mower blades are extremely sharp. Handle with extreme care.
- Kinder und Umstehende: Halten Sie Kinder und Zuschauer vom Arbeitsbereich fern.
3. Einrichtung und Installation
Follow these steps to safely replace your mower blade:
- Bereiten Sie den Traktor vor: Ensure the tractor is turned off, the spark plug lead is disconnected, and the parking brake is engaged.
- Zugriff auf die Klinge: Carefully tilt the tractor or raise the mower deck to access the underside where the blade is located. Ensure the tractor is stable and cannot tip over.
- Alte Klinge entfernen: Using a wrench, loosen the bolt that secures the blade to the spindle. You may need to use a block of wood to prevent the blade from turning while loosening the bolt. Note the orientation of the old blade before removal.
- Clean Spindle Area: Clean any grass clippings or debris from the spindle and blade mounting area.
- Neues Messer einbauen: Position the new AL-KO 21-inch left-hand blade onto the spindle, ensuring the cutting edge is facing the correct direction for counter-clockwise rotation. The blade should sit flush against the spindle flange.
- Sichere Klinge: Reinstall the blade bolt and tighten it securely with a wrench. Refer to your garden tractor's manual for the specific torque specifications. Overtightening or undertightening can cause damage or unsafe operation.
- Endkontrolle: Once the blade is installed, ensure it is securely fastened and can rotate freely without obstruction. Reconnect the spark plug lead.
4. Bedienungsanleitung
After successful installation, operate your garden tractor according to its manufacturer's instructions. The new blade will provide efficient cutting performance when used correctly.
- Always ensure the blade is free of debris before starting the engine.
- Avoid striking hard objects (rocks, roots, metal) as this can damage the blade and the mower.
- Regularly check the blade for wear and damage during operation breaks.
5. Wartung
Proper maintenance extends the life of your blade and ensures optimal cutting performance.
- Reinigung: After each use, clean grass clippings and debris from the blade and the underside of the mower deck. This prevents rust and maintains balance.
- Inspektion: Regularly inspect the blade for signs of wear, nicks, bends, or cracks. A damaged blade can cause uneven cutting and excessive vibration.
- Schärfung: Sharpen the blade as needed to maintain a keen cutting edge. Ensure the blade remains balanced after sharpening to prevent vibration. If you are unsure how to sharpen a blade correctly, consult a professional.
- Ersatz: Tauschen Sie die Klinge aus, wenn sie stark verbogen, rissig oder über die zulässigen Grenzen hinaus abgenutzt ist. Generell empfiehlt es sich, Klingen jährlich oder bei starker Beanspruchung häufiger zu wechseln.
6. Fehlerbehebung
If you experience issues with your mower's cutting performance, consider the following:
- Ungleichmäßiger Schnitt: Ursache: Dull, bent, or improperly installed blade; uneven mower deck. Lösung: Inspect and sharpen/replace the blade. Ensure the blade is installed correctly and the mower deck is level.
- Übermäßige Vibration: Ursache: Bent, unbalanced, or loose blade. Lösung: Disconnect spark plug, inspect blade for damage. Replace if bent or cracked. Ensure blade bolt is tightened to specifications. Balance the blade if necessary.
- Poor Grass Discharge: Ursache: Clogged mower deck; incorrect blade rotation; dull blade. Lösung: Clean the underside of the mower deck. Verify the blade is installed with the cutting edge facing the correct direction for counter-clockwise spin. Sharpen or replace the blade.
7. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Klingenlänge | 524 mm (21 Zoll) |
| Axle Hole Diameter | 16.2 mm |
| Side Hole Centers | 150 mm |
| Drehrichtung | Left-hand (Counter-clockwise) |
| Ersetzt OEM-Teilenummer. | 521208 |
| Hersteller Teile-Nr. | 250170838 |
| Artikelgewicht | 1.01 kg |
8. Compatible AL-KO Garden Tractor Models
This 21-inch left-hand mower blade is suitable for the following AL-KO garden tractor models:
- AL-KO T1000R (Nos: 118523 & 11747)
- AL-KO T1000 before 12/04 (No: 118329)
- AL-KO T1000 after 12/04 (No: 118329)
- AL-KO T1000HD (No: 118917)
- AL-KO T13-102HD (No: 118148)
- AL-KO T15-102HD (Nos: 118620 and 118866)
- AL-KO T16-102HDH (No: 118868)
- AL-KO T16-102HD-H (No: 118755)
- AL-KO T16-102 before 02/00 (No: 110919)
- AL-KO T16-102 after 02/00 (No: 110919)
- AL-KO T18-102HD (Nos: 118248 and 118870)
- AL-KO T18-102HDE (No: 118623)
- AL-KO T20-102HDE (Nos: 118748, 118241 and 118871)
9. Garantie und Support
This product is a quality replacement part. For specific warranty information, please refer to your original purchase documentation or contact your retailer.
For technical support regarding your AL-KO garden tractor or general inquiries about AL-KO products, please consult your tractor's user manual or visit the official AL-KO webWebsite mit Kontaktinformationen zum Kundenservice.





