Unitech MS840 Rugged Handheld Laser Scanner
Model: MS840-SUBBGC-SG
1. Einleitung
The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.
Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.
2. Sicherheitshinweise
Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.
- Lasersicherheit: This device uses a Class 1 laser. Do not stare directly into the laser beam or point it at others.
- Elektrische Sicherheit: Use only the provided USB cable. Do not expose the device to water or extreme temperatures.
- Handhabung: The MS840 is rugged, but avoid dropping it from excessive heights or subjecting it to severe impacts.
- Entsorgung: Das Gerät und seine Komponenten sind gemäß den örtlichen Umweltvorschriften zu entsorgen.
3. Packungsinhalt
Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:
- Unitech MS840 Handheld Laser Scanner
- USB-Verbindungskabel
- Kurzanleitung (falls zutreffend)
4. Einrichtung
Follow these steps to set up your Unitech MS840 scanner:
- Schließen Sie das USB-Kabel an:
Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).
- Treiberinstallation:
The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.
- Erster Test:
Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.
5. Bedienung des Scanners
The Unitech MS840 is designed for simple and efficient barcode scanning.
- Einschalten: Der Scanner schaltet sich automatisch ein, sobald er an einen USB-Anschluss mit Stromversorgung angeschlossen wird.
- Zielen: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
- Scannen: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
- Erfolgreicher Scan-Hinweis: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- Unterstützte Barcodes: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.
6. Wartung
Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.
- Reinigung des Scanfensters:
Reinigen Sie das Scanfenster regelmäßig mit einem weichen, fusselfreien Tuch. Bei hartnäckigem Schmutz leicht andrücken.ampen the cloth with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials.
- Allgemeine Reinigung:
Wischen Sie die Außenseite des Scanners mit einem weichen, fusselfreien Tuch ab.amp Stoff. Achten Sie darauf, dass keine Feuchtigkeit in die Öffnungen eindringt.
- Kabelpflege:
Avoid bending or twisting the USB cable excessively. Store the cable neatly when not in use to prevent damage.
- Lagerung:
Bewahren Sie den Scanner bei Nichtgebrauch in einer sauberen, trockenen Umgebung fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
7. Fehlerbehebung
If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Scanner lässt sich nicht einschalten. | USB-Kabel nicht richtig angeschlossen oder USB-Anschluss defekt. | Stellen Sie sicher, dass das USB-Kabel sowohl mit dem Scanner als auch mit dem Computer fest verbunden ist. Versuchen Sie es mit einem anderen USB-Anschluss an Ihrem Computer. |
| Scanner liest keine Barcodes. | Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window. |
| Scanned data not appearing on screen. | Application not in focus, incorrect keyboard layout, or driver issue. | Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status. |
| Der Scanner piept, aber es werden keine Daten empfangen. | Data transmission issue or application not ready. | Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue. |
If the problem persists after trying these solutions, please contact Unitech customer support.
8. Spezifikationen
Detailed technical specifications for the Unitech MS840 scanner:
| Besonderheit | Beschreibung |
|---|---|
| Marke | Unitech |
| Modell | MS840-SUBBGC-SG |
| Scannertyp | Hand-held Laser Scanner |
| Scan-Elementtyp | Laser |
| Scan Speed / Rate | 100 scans/second (100 fps) |
| Konnektivitätstechnologie | Kabel (USB) |
| Schnittstellentyp | USB |
| Kompatible Geräte | Laptop, Schreibtisch |
| Produktabmessungen (L x B x H) | 2.54 x 2.54 x 2.54 cm (25 x 25 x 25 Millimeter) |
| Artikelgewicht | 454 g (453.59 g) |
| Batterien erforderlich | NEIN |
| ASIN | B00C4OGY2I |
| Globale Handelsidentifikationsnummer (GTIN) | 00132017875439 |
| Erstes verfügbares Datum | 30. April 2013 |
9. Garantie und Support
Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech webWebsite.
For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.
Note: Contact information for Unitech can typically be found on their official webWebsite oder in der Produktverpackung.
