Hunter NODE600 6-Station Irrigation Controller

Einführung

The Hunter NODE600 is a battery-powered irrigation controller designed for isolated sites or areas without AC power. This manual provides detailed instructions for the installation, programming, and maintenance of your NODE600 controller to ensure efficient and reliable operation of your irrigation system.

Produkt überview

The NODE600 controller is built with a robust, waterproof exterior, making it suitable for installation within a valve box. It operates on 9V batteries and features an LCD screen for easy programming. The controller supports up to 6 stations, offering flexible scheduling options.

Abbildung 1: Hunter NODE Controller Interface. This image displays the front panel of a Hunter NODE controller, showing the LCD screen, programming buttons (PRG, plus, minus, arrow keys, enter), and wiring connections for common (COM) and sensor (SEN) inputs. The screen shows a time of 3:43 PM and battery status.

Setup und Installation

1. Einlegen der Batterie: The NODE600 requires one or two 9V alkaline batteries for operation. Open the battery compartment, insert the batteries, ensuring correct polarity, and securely close the compartment.
2. Montage: The controller is designed to mount directly to a valve's solenoid or within a valve box. Ensure the mounting location is secure and allows for easy access for programming and maintenance.
3. Kabelverbindungen:
   • Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled 'COM' on the controller.
   • Stationsleitungen: Connect each station wire from your valves to the corresponding numbered terminal (1-6) on the controller.
   • Sensordrähte (optional): If using a rain or soil moisture sensor, connect its wires to the terminals labeled 'SEN'. Refer to your sensor's manual for specific wiring instructions.

Bedienungsanleitung

The NODE600 utilizes standard Hunter controller programming logic, featuring 3 programs (A, B, C) and 4 start times per program.

Basic Programming Steps:

1. Aktuelle Uhrzeit und Tag einstellen:
   • Drücken Sie die PRG Drücken Sie die Taste so lange, bis die Zeitanzeige blinkt.
   • Verwenden Sie die + or - Tasten zum Einstellen der Stunde, dann drücken Sie die arrow right button to move to minutes and adjust.
   • Drücken Sie die arrow right button again to set the current day of the week. Use + or - zu wählen.
   • Drücken PRG , um zu speichern und zu beenden.
2. Program Start Times:
   • Drücken PRG until 'START TIME' appears.
   • Verwenden Sie die arrow right Taste zur Auswahl von Programm A, B oder C.
   • Verwenden + or - to set the desired start time for the first cycle.
   • Drücken arrow right to move to the next start time (up to 4 per program). Set or leave blank if not needed.
   • Drücken PRG um zu speichern.
3. Set Station Run Times:
   • Drücken PRG until 'RUN TIME' appears.
   • Verwenden Sie die arrow right button to select the desired station (1-6) and program (A, B, or C).
   • Verwenden + or - to set the run time in minutes for that station.
   • Repeat for all active stations in each program.
   • Drücken PRG um zu speichern.
4. Bewässerungstage festlegen:
   • Drücken PRG until 'WATER DAYS' appears.
   • Verwenden Sie die arrow right Taste zur Auswahl von Programm A, B oder C.
   • Choose your watering schedule: specific days of the week (MO, TU, WE, TH, FR, SA, SU), Odd/Even days, or Interval watering. Use + or - to select and the arrow right button to confirm or move between options.
   • Drücken PRG um zu speichern.

For detailed programming sequences, refer to the official Hunter Industries support resources or video tutorials, as the interface can require careful navigation.

Wartung

• Batteriewechsel: Replace 9V batteries annually or when the low battery indicator appears on the LCD screen. Use high-quality alkaline batteries for optimal performance.
• Umweltschutz: While the NODE600 has a waterproof exterior, ensure it is installed in a location that minimizes direct exposure to extreme weather conditions and physical damage.
• Reinigung: Reinigen Sie die Außenseite des Controllers regelmäßig mit einem Reinigungstuch.amp Mit einem Tuch Schmutz und Ablagerungen entfernen. Keine scharfen Chemikalien verwenden.

Fehlerbehebung

• Controller lässt sich nicht einschalten: Überprüfen Sie den Batterieeinbau und stellen Sie sicher, dass die Batterien neu sind. Tauschen Sie sie gegebenenfalls aus.
• Kein Wasserfluss:
  • Verify that the main water supply is on.
  • Check wiring connections to valves and the common wire.
  • Ensure run times and start times are correctly programmed.
  • If a sensor is connected, check its status; it might be preventing watering.
• Programmierschwierigkeiten: The programming interface can be complex. Refer to the detailed programming steps in this manual or consult Hunter's official support resources for visual guides and further assistance.
• Inkonsistenter Betrieb: Ensure batteries are not low. Check for loose wiring connections.

Technische Daten

Garantieinformationen

Hunter Industries typically offers a warranty on its products. For specific warranty terms and conditions applicable to your NODE600 controller, please refer to the official documentation provided with your purchase or visit the Hunter Industries website. Warranty periods may be based on the product's manufacturing date code.

Kundenservice

For further assistance, technical support, or detailed programming guidance, please contact Hunter Industries customer support. A reported support number is 1-800-733-2833, available from 6 AM to 4 PM Pacific Time. It is recommended to verify current contact information on the official Hunter Industries webWebsite.