One Control Minimal Series AB Box Instruction Manual

Einführung

The One Control Minimal Series AB Box is a compact and versatile signal routing device designed for musicians. It allows you to control the direction of your audio signal path, enabling functions such as selecting between amplifiers, muting your signal, or switching between different input sources. Its robust design ensures durability and low noise performance.

Produkt überview

The AB Box features one input and two outputs (A and B), along with a footswitch to toggle between the outputs. It also includes a 9-volt power input for LED indicator functionality.

Hauptmerkmale:

• Kompaktes und langlebiges Design.
• One input, two outputs (A and B).
• Footswitch for toggling between outputs.
• LED indicators for active output (requires power).
• Can operate passively without power (LEDs will not function).

Aufstellen

Connecting as an Output Selector (1 Input to 2 Outputs):

1. Schließen Sie Ihr Instrument (z. B. Gitarre) an den/die/das an. EINGANG jack on the AB Box.
2. Connect a cable from the AUSGANG A jack to your first destination (e.g., Amplifier A).
3. Connect a cable from the AUSGANG B jack to your second destination (e.g., Amplifier B or a tuner).
4. For LED functionality, connect a 9-volt center negative power supply to the LEISTUNG input. The unit will function passively without power, but the LEDs will not illuminate.

Connecting as an Input Selector (2 Inputs to 1 Output):

1. Connect your first instrument to the AUSGANG A jack (used as Input 1 in this configuration).
2. Connect your second instrument to the AUSGANG B jack (used as Input 2 in this configuration).
3. Connect a cable from the EINGANG jack (used as Output in this configuration) to your ampVerstärker oder nächstes Effektpedal in der Signalkette.
4. For LED functionality, connect a 9-volt center negative power supply to the LEISTUNG input. The unit will function passively without power, but the LEDs will not illuminate.

Bedienungsanleitung

Toggling Outputs/Inputs:

Once connected, press the footswitch to toggle between the active output (A or B) or active input (A or B). If a power supply is connected, the red and blue LEDs will indicate which path is currently active.

Mute/Tuner Switch Functionality:

To use the AB Box as a mute or tuner switch, connect your main signal path to one output (e.g., Output A) and your tuner to the other output (e.g., Output B). When you switch to Output B, your main signal will be muted, allowing you to tune silently. Even without a tuner connected, switching to an unused output will mute your signal.

Wartung

• Halten Sie das Gerät sauber und frei von Staub und Schmutz. Verwenden Sie zum Reinigen ein weiches, trockenes Tuch.
• Setzen Sie das Gerät keinen extremen Temperaturen, hoher Luftfeuchtigkeit oder direkter Sonneneinstrahlung aus.
• Do not attempt to open the enclosure or modify the internal circuitry, as this may void the warranty and cause damage.
• Um Signalverlust oder zeitweiligen Betrieb zu vermeiden, stellen Sie sicher, dass alle Kabel fest angeschlossen sind.

Fehlerbehebung

Kein Ton:

• Check all cable connections to ensure they are secure and correctly plugged into the designated input/output jacks.
• Verify that the footswitch is set to the desired active output/input.
• Test cables and other equipment in your signal chain to rule out external issues.

LEDs leuchten nicht:

• Ensure a 9-volt center negative power supply is connected to the POWER input.
• Check that the power supply is functioning correctly and providing the specified voltage.
• The unit can operate passively without power, but the LEDs will not light up. This is normal behavior.

Unerwünschte Geräusche/Brummen:

• Stellen Sie sicher, dass alle angeschlossenen Geräte ordnungsgemäß geerdet sind.
• Verwenden Sie hochwertige, abgeschirmte Instrumentenkabel.
• If using two amplifiers, ground loop issues may occur. Consider using a ground loop isolator if necessary.

Technische Daten

Garantie und Support

For warranty information and technical support, please refer to the official One Control webBesuchen Sie unsere Website oder wenden Sie sich an Ihren autorisierten Händler. Die genauen Garantiebedingungen können je nach Region und Händler variieren.