NETGEAR R7000 Nighthawk AC1900 Dual-Band Gigabit WLAN-Router – Benutzerhandbuch

1. Einleitung

1.1 Produktüberschussview

The NETGEAR R7000 Nighthawk AC1900 is a high-performance dual-band wireless router designed to provide fast and reliable internet connectivity for homes and small offices. It supports the 802.11ac Wi-Fi standard, offering combined speeds of up to 1900 Mbps across its 2.4 GHz and 5 GHz bands. Equipped with Gigabit Ethernet ports and a powerful dual-core processor, this router is suitable for demanding applications such as online gaming, HD video streaming, and connecting multiple devices simultaneously.

1.2 Packungsinhalt

• NETGEAR R7000 Nighthawk AC1900 Smart WLAN-Router
• Three (3) Detachable Antennas
• Ethernet-Kabel
• Power Adapter (Input Voltage: 100-240 V)
• Kurzanleitung

2. Einrichtung

2.1 Physische Verbindung

1. Positionieren Sie den Router: Place the router in a central location to ensure optimal Wi-Fi coverage throughout your area. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
2. Antennen anbringen: Screw the three detachable antennas onto the connectors on the back and sides of the router. Adjust them vertically for best performance.
3. Verbindung zum Modem herstellen: Connect one end of the provided Ethernet cable to the yellow Internet port (WAN) on the back of the R7000 router. Connect the other end to an Ethernet port on your modem.
4. An die Stromversorgung anschließen: Connect the power adapter to the router's power port and plug it into an electrical outlet. Press the Power On/Off button if necessary. Wait for the Power LED on the front of the router to turn solid white.
5. Geräte verbinden: You can connect your computer or other devices to the router using an Ethernet cable (to one of the four yellow LAN ports) or wirelessly using the default Wi-Fi network name (SSID) and password found on the router's label.

Figure 1: Rear panel connections of the NETGEAR R7000 router.

2.2 Erstkonfiguration

After physical setup, you will need to configure the router:

1. Öffnen Sie ein web browser on a computer or device connected to the router.
2. Typ routerlogin.net or 192.168.1.1 in die Adressleiste und drücken Sie die Eingabetaste.
3. Follow the on-screen instructions of the NETGEAR genie setup wizard to configure your internet connection and personalize your Wi-Fi network name (SSID) and password.
4. It is recommended to change the default administrator password for security purposes.

3. Bedienung des Routers

3.1 Geräte anschließen

Wi-Fi-Verbindung: On your wireless device, search for available Wi-Fi networks. Select your router's Wi-Fi network name (SSID) and enter the password. The R7000 supports both 2.4 GHz and 5 GHz bands, allowing you to connect devices to the most suitable network for their needs.

WPS (Wi-Fi Protected Setup): For compatible devices, press the WPS button on the router and then activate WPS on your device within two minutes to establish a secure wireless connection without entering a password.

Ethernet-Verbindung: For wired devices, connect an Ethernet cable from the device to any of the four yellow LAN ports on the router.

3.2 WLAN-Einstellungen

You can customize your Wi-Fi settings by logging into the router's web Schnittstelle (routerlogin.net). Here you can:

• Change the Wi-Fi network names (SSIDs) for both 2.4 GHz and 5 GHz bands.
• Update your Wi-Fi passwords.
• Select different security protocols (WPA2-PSK is recommended).
• Adjust wireless channels to avoid interference.

3.3 Gastnetzwerk

The R7000 allows you to set up a separate guest Wi-Fi network. This provides internet access to guests while keeping your main network and connected devices secure and private. You can enable, configure, and set a unique password for the guest network through the router's web Schnittstelle.

3.4 USB-Speicher

The router features a USB 3.0 port on the front and a USB 2.0 port on the rear. You can connect a USB storage device (like a flash drive or external hard drive) to either port to create network-attached storage (NAS). This allows you to share files and media across your network or access them remotely using NETGEAR ReadySHARE features.

Abbildung 2: Vorderseite view of the NETGEAR R7000 router, showing the USB 3.0 port.

4. Wartung

4.1 Firmware-Updates

Regularly updating your router's firmware is crucial for security, performance, and access to new features. You can check for and install firmware updates through the router's web interface, usually found under the 'Advanced' or 'Administration' sections. It is recommended to perform updates during off-peak hours and not to interrupt the process once started.

4.2 Router zurücksetzen

If you encounter persistent issues or forget your router's login credentials, you may need to perform a factory reset. This will revert all settings to their default values. To perform a factory reset:

1. With the router powered on, use a paperclip or similar pointed object to press and hold the Reset button (located on the rear panel) for about 7-10 seconds.
2. Lassen Sie die Taste los, sobald die Power-LED zu blinken beginnt.
3. The router will restart with factory default settings. You will then need to reconfigure it using the initial setup process.

5. Fehlerbehebung

5.1 Häufige Probleme

• Keine Internetverbindung: Check the Internet LED on the router. If it's amber or off, ensure your modem is working correctly and the Ethernet cable is securely connected to the router's yellow Internet port. Restart both your modem and router.
• Langsame WLAN-Geschwindigkeit: Ensure your devices are connected to the appropriate Wi-Fi band (5 GHz for faster speeds, 2.4 GHz for better range). Check for interference from other devices. Consider repositioning the router.
• Zugriff auf Router-Einstellungen nicht möglich: Verify that your device is connected to the router (either wired or wirelessly). Try clearing your browser's cache or using a different browser. Ensure you are typing routerlogin.net or 192.168.1.1 correctly. If you forgot the password, perform a factory reset.

5.2 LED-Anzeigen

The LEDs on the front of the router provide status information:

• Betriebs-LED: Solid white indicates the router is powered on and operating normally. Blinking white indicates a firmware upgrade or factory reset.
• Internet-LED: Solid white indicates a successful internet connection. Amber indicates no internet connection. Blinking white indicates data activity.
• Wi-Fi 2.4 GHz / 5 GHz LEDs: Solid white indicates the respective Wi-Fi band is enabled. Blinking white indicates wireless activity.
• Ethernet LAN LEDs (1-4): Solid white indicates a device is connected to that port. Blinking white indicates data activity.
• USB-LED: Solid white indicates a USB device is connected. Blinking white indicates data activity on the USB port.

6. Spezifikationen

7. Garantie und Support

7.1 Garantieinformationen

This product is covered by a manufacturer's limited warranty. The specific terms and duration of the warranty may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official NETGEAR webWebsite für detaillierte Garantieinformationen.

7.2 Technischer Support

For further assistance, technical support, or to access the latest drivers and documentation, please visit the official NETGEAR support webAuf dieser Website finden Sie häufig gestellte Fragen, Anleitungen zur Fehlerbehebung und Kontaktinformationen zum Kundendienst.

NETGEAR-Unterstützung WebWebsite: www.netgear.com/support/