1. Einleitung
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. Sicherheitshinweise
- Netzteil: A 12V DC power adapter is nicht enthalten and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- Wastage: Die Gesamtwassermengetage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- Hitze: The LED strip operates at an extremely low heat, making it safe to touch.
- Wasserbeständigkeit: Dieses Produkt ist nicht wasserdicht and intended for indoor use only. Avoid exposure to water or high humidity.
- Handhabung: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- Schneiden: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. Packungsinhalt
Überprüfen Sie, ob alle Komponenten in Ihrem Paket vorhanden sind:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | 4100057-WW |
| Lichtart | LED Strip Light (SMD 2835) |
| Länge | 16.4 ft (5 Meter) |
| Lichtfarbe | Warmweiß |
| Farbtemperatur | 3000 Kelvin |
| Bandtage | Gleichstrom 12 V |
| Wastage | 18 Watt |
| Lichtstrom | 1200 Lumen |
| Anzahl der LEDs | 300 |
| Dimmbar | Nein (nicht dimmbar) |
| Innen-/Außenbereich | Nur für den Innenbereich |
| Material | Silikon |
| Artikelgewicht | 60 Gramm (2.12 Unzen) |
Energieeffizienz
Abbildung 4.1: Energieeffizienzlabel. Weitere Informationen finden Sie unter [Link einfügen]. eprel.ec.europa.eu/qr/1056793.
5. Einrichtungsanweisungen
5.1 Komponenten überview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 Installationsschritte
- Bereiten Sie die Oberfläche vor: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- Messen und Zuschneiden (optional): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- Den Streifen anbringen: Peel off the protective backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
- Strom anschließen: Connect the LED strip to a compatible 12V DC power adapter (not included). Ensure the polarity is correct.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. Bedienungsanleitung
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is nicht dimmbar and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Product in Use
Abbildung 6.1: Bspample of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 Videodemonstration
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7. Wartung
- Reinigung: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- Handhabung: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- Lagerung: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der LED-Streifen leuchtet nicht. | Kein Strom, falsche Lautstärketage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| Adhesive is not holding the strip. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. Garantie und Support
9.1 Garantieinformationen
This Lepro LED Strip Light comes with a 2 Jahr Garantie Diese Garantie gilt ab Kaufdatum und deckt Herstellungsfehler bei normalem Gebrauch ab. Sie deckt keine Schäden ab, die durch unsachgemäße Installation, Missbrauch, Unfälle oder unbefugte Änderungen verursacht wurden.
9.2 Kundendienst
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro webWebsite für Kontaktinformationen.
