1. Einleitung
Vielen Dank für Ihren Einkauf.asing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampschwerer.
2. Sicherheitshinweise
- Energiequelle: Use only the specified power adapter (18V DC, center negative).
- Belüftung: Sorgen Sie für ausreichende Belüftung, um eine Überhitzung zu vermeiden. Blockieren Sie die Belüftungsöffnungen nicht.
- Feuchtigkeit: Das Gerät darf weder Regen, Feuchtigkeit noch übermäßiger Luftfeuchtigkeit ausgesetzt werden.
- Handhabung: Vorsichtig behandeln. Das Gerät nicht fallen lassen oder starken Stößen aussetzen.
- Wartung: Versuchen Sie nicht, dieses Gerät selbst zu reparieren. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.
- Lautsprecheranschluss: Verbinden Sie immer die amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.
3. Produktüberschreitungview
The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.
Bedienelemente auf der Vorderseite
- EINGANG: 1/4" mono jack to plug in your guitar.
- BASS: Controls the low frequency response.
- MITTE: Controls the mid frequency response.
- VERDREIFACHEN: Controls the high frequency response.
- DAZUGEWINNEN: Controls the gain level.
- VOLUMEN: Steuert die Ausgangslautstärke.
- Ein / Aus Schalter: Schaltet das Gerät ein oder aus.
Anschlüsse auf der Rückseite
- 18V Gleichstrom: Plug in DC 18V adapter (center negative).
- TELEFON-/LINE-AUSGANG: 1/8" stereo jack, for using headphones or recording.
- AUX-IN: 1/8" stereo jack, for connecting an external music player.
- FX LOOP RETURN: 1/4" mono jack, connect to your effects output jack.
- LAUTSPRECHERAUSGANG: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
- FX LOOP SEND: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp und Macht amp).
4. Einrichtung
- Lautsprecherbox anschließen: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampschwerer.
- Strom anschließen: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
- Connect Guitar: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
- Anfangseinstellungen: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
- Einschalten: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.
5. Bedienungsanleitung
- Tonhöhe anpassen: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
- Anpassen der Verstärkung: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
- Lautstärke anpassen: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
- Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp Abschnitt.
- Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
- AUX-IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.
6. Wartung
- Reinigung: Reinigen Sie die ampDie Außenseite des Verstärkers reinigen. Keine flüssigen Reiniger oder Lösungsmittel verwenden.
- Lagerung: Speichern Sie die ampDer Verstärker sollte an einem trockenen, kühlen Ort ohne direkte Sonneneinstrahlung und extreme Temperaturen aufgestellt werden.
- Tubenpflege: As a hybrid amplifier, der Voramp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Ton | Power not connected, speaker not connected, volume/gain too low, faulty cable. | Check power connection, ensure speaker is connected, increase volume/gain, test with different cables. |
| Schwacher oder verzerrter Ton | Faulty cable, incorrect impedance, worn preamp Rohr. | Test cables, ensure correct speaker impedance, consult technician for tube replacement. |
| Excessive hum/noise | Erdschleife, fehlerhaftes Netzteil, Störungen durch andere elektronische Geräte. | Try different power outlets, use a power conditioner, move away from other electronic devices. |
8. Spezifikationen
- Ausgang Wattage: 5 Watt
- Energiequelle: Kabelgebundenes elektrisches Gerät (18V DC, Mittelkontakt negativ)
- Artikelgewicht: 15.5 Unzen
- Produktabmessungen: 2.34 x 5.03 x 2.95 Zoll
- Kompatible Geräte: Gitarre
- Steckertyp: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
- Lautsprecherimpedanz: 4-16 Ohm
- Modellnummer: TANLA2
9. Produktvideos
OriPure 5W Tube Guitar Amplifier-Kopf
Videobeschreibung: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.
The Joyo Jackman II Is Like A Tiny Marshall JCM 800.
Videobeschreibung: Dieses Video bietet eine detaillierte Übersichtview and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.
OriPure 15W Tube Guitar Amplifier Head OA-H15
Videobeschreibung: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.
JOYO Meteor II BanTamp XL-Serie Mini Amp Head 20 Watt
Videobeschreibung: This video presents the JOYO Meteor II BanTamp XL-Serie Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.
Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM
Videobeschreibung: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.
JOYO 20W Amplifier Head BanTamP Series ATOMIC
Videobeschreibung: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.
10. Garantie und Support
For warranty information and technical support, please refer to the official Hotone webBesuchen Sie unsere Website oder wenden Sie sich an Ihren autorisierten Händler. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
