1. Einleitung
The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.
Hauptmerkmale:
- Ultra-compact, portable ampStrahlerkopf.
- Inspired by the legendary Vox AC30 ampVerstärkerton.
- Separate Volume and Gain control knobs.
- 3-band EQ (Bass, Middle, Treble) for tone shaping.
- Integrated FX Loop for external effects integration.
2. Sicherheitshinweise
- Stromversorgung: Use only the specified 18V DC power adapter (center negative). Incorrect voltage kann das Gerät beschädigen.
- Belüftung: Sorgen Sie für ausreichende Belüftung. Blockieren Sie keine Belüftungsöffnungen.
- Feuchtigkeit: Das Gerät sollte nicht mit Wasser oder übermäßiger Feuchtigkeit in Berührung kommen.
- Hitze: Vermeiden Sie es, das Gerät in der Nähe von Wärmequellen oder in direktem Sonnenlicht aufzustellen.
- Reinigung: Nur mit trockenem Tuch reinigen.
- Wartung: Versuchen Sie nicht, dieses Gerät selbst zu reparieren. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.
3. Produktüberschreitungview
Bild: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.
Bedienelemente auf der Vorderseite:
Bild: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.
- EINGANG: 1/4" mono jack for connecting your guitar.
- BASS: Controls the low frequency response of your tone.
- MITTE: Controls the mid frequency response of your tone.
- VERDREIFACHEN: Controls the high frequency response of your tone.
- DAZUGEWINNEN: Controls the pre-amp gain level, affecting distortion and sustain.
- VOLUMEN: Steuert die Gesamtausgabelautstärke des ampschwerer.
- Ein / Aus Schalter: Schaltet das Gerät ein oder aus.
Anschlüsse an der Rückseite:
Bild: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.
- 18V Gleichstrom: Power input for the included 18V DC adapter (center negative).
- TELEFON-/LINE-AUSGANG: 1/8" stereo jack for headphones or direct recording.
- AUX-IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
- FX LOOP RETURN: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
- LAUTSPRECHERAUSGANG: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
- FX LOOP SEND: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.
4. Einrichtung und Anschlüsse
- Stromanschluss: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
- Gitarrenverbindung: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
- Lautsprecheranschluss: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Warnung: Betreiben Sie das amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
- Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
- AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
- FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".
5. Bedienungsanleitung
- Einschalten: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
- Anfangseinstellungen: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
- Anpassen der Verstärkung: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
- Lautstärke anpassen: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
- Tone Shaping with EQ:
- BASS: Adjust for low-end warmth and fullness.
- MITTE: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
- VERDREIFACHEN: Adjust for brightness and clarity.
- Ausschalten: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.
6. Wartung
- Reinigung: Reinigen Sie die Außenseite des ampVerstärker. Verwenden Sie keine flüssigen Reiniger, Aerosole oder Lösungsmittel.
- Lagerung: Speichern Sie die ampVerstärker an einem kühlen, trockenen Ort ohne direkte Sonneneinstrahlung und extreme Temperaturen aufstellen.
- Transport: Beim Transport sicherstellen, dass ampDer Verstärker ist sicher verpackt, um Beschädigungen zu vermeiden.
- Kabelpflege: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Keine Tonausgabe |
|
|
| übermäßiges Brummen oder Rauschen |
|
|
| Verzerrter oder schwacher Ton |
|
|
8. Spezifikationen
| Modell: | TANLA1 |
| Ausgang Wattage: | 5 Watt |
| Energiequelle: | Kabelgebundenes elektrisches Gerät (18V DC, Mittelkontakt negativ) |
| Kompatible Geräte: | Gitarre |
| Steckertyp: | 1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In) |
| Artikelgewicht: | 15.5 Unzen (ca. 440 Gramm) |
| Produktabmessungen: | 2.34 x 5.03 x 2.95 Zoll (ca. 5.9 x 12.8 x 7.5 cm) |
| Materialart: | Edelstahl |
| Farbe: | Schwarz |
9. Garantieinformationen
Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
10. Kundendienst
If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webWebsite.
Visit Hotone Audio Support Page (Examp(der tatsächliche Link kann abweichen)
