1. Produktüberschreitungview
The HENDI 271346 Roasting Thermometer/Timer is a versatile kitchen tool designed to accurately monitor temperatures during cooking, especially for roasting. It features a durable stainless steel probe suitable for oven use and includes a timer function for precise cooking control.
Image: The HENDI 271346 digital thermometer and timer unit with its attached stainless steel probe, ready for use.
Hauptmerkmale:
- Timer-Funktion: Allows for precise timing of cooking processes.
- Großer Temperaturbereich: Measures from 0°C to 300°C (32°F to 572°F).
- Wählbare Einheiten: Einfacher Wechsel zwischen Celsius (°C) und Fahrenheit (°F).
- Accurate Graduation: Provides readings with 1°C (or 0.1°C resolution as per specifications) precision.
- Sperrmodus: For continuous temperature monitoring.
- Min/Max Temperature Function: Records the lowest and highest temperatures measured.
- Programmable Temperature Alarm: Alerts you when the target temperature is reached.
- Langlebige Sonde: 150 mm stainless steel probe designed to remain in the oven (heat resistant).
- Batteriebetrieben: Convenient and portable, battery included.
2. Sicherheitshinweise
Please read all safety instructions carefully before using the device. Improper use can lead to damage or injury.
- Handhabung der Sonde: The stainless steel probe is sharp. Handle with care to avoid injury.
- Haupteinheit: The main thermometer unit is NOT waterproof. Do not immerse it in water or other liquids. Clean with a damp nur Stoff.
- Hitzebeständigkeit der Sonde: The probe and its cable are designed to withstand high oven temperatures (up to 250°C). However, avoid direct flame contact.
- Kinder: Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
- Batteriesicherheit: Achten Sie auf die richtige Batteriepolarität. Entfernen Sie die Batterien, wenn das Gerät längere Zeit nicht benutzt wird. Entsorgen Sie Batterien umweltgerecht.
- Verwendungszweck: This device is intended for food temperature measurement only. Do not use for other purposes.
3. Packungsinhalt
Prüfen Sie nach dem Öffnen der Verpackung, ob alle folgenden Artikel vorhanden sind:
- HENDI 271346 Thermometer/Timer Unit
- 150 mm Stainless Steel Temperature Probe
- Batterie (vorinstalliert oder separat enthalten)
Image: All components of the HENDI 271346 thermometer, including the main unit, probe, and a probe clip/holder.
4. Einrichtung
- Einlegen der Batterie:
Locate the battery compartment on the back of the main unit. Open the cover, insert the included battery (typically AAA) ensuring correct polarity (+/-), and close the compartment securely.
- Sondenanschluss:
Insert the probe's jack firmly into the designated port on the side of the main unit. Ensure a secure connection for accurate readings.
- Erstes Einschalten:
Press the power button (if available, otherwise it may power on automatically upon probe connection or battery insertion). The display should light up, showing the current ambient temperature.
5. Bedienungsanleitung
5.1. Temperaturmessung
- Platzierung der Sonde: Insert the stainless steel probe into the thickest part of the food, avoiding bones or gristle, for the most accurate temperature reading.
- Überwachung der Temperatur: The current temperature will be displayed on the main unit's screen.
- Using in Oven: The probe and its cable are oven-safe. Ensure the main unit remains outside the oven, away from direct heat.
Image: The HENDI 271346 thermometer in use, with the probe inserted into a piece of meat to monitor its internal temperature.
5.2. Einstellen der Temperatureinheiten (°C/°F)
Press the "°C/°F S/S" button to toggle between Celsius and Fahrenheit temperature displays.
5.3. Setting a Target Temperature (Alarm)
- Press the "SET TEMP" button (or similar, based on common thermometer interfaces, assuming it's the same as the °C/°F button or a dedicated one if present).
- Use the "MIN" and "SEC" buttons (or up/down arrows if present) to adjust the desired target temperature.
- Once the target temperature is set, the alarm will sound when the probe reaches this temperature.
5.4. Verwenden der Timer-Funktion
The device also functions as a timer.
- Press the "MODE" button (if available, or a long press on "S/S" might switch modes) to enter timer mode.
- Use the "MIN" and "SEC" buttons to set the desired countdown time.
- Press the "S/S" button to start or stop the timer. An alarm will sound when the timer reaches zero.
5.5. Min/Max Temperature Function
Mit dieser Funktion können Sie view the minimum and maximum temperatures recorded since the device was powered on or reset.
- Press a dedicated "MIN/MAX" button (if available) or cycle through modes to view diese Werte.
- To reset the min/max values, consult the device's specific button combination (often a long press on the min/max button or power cycle).
5.6. Sperrmodus
The lock mode is designed to monitor temperature continuously without accidental changes to settings.
- Activate lock mode by pressing the designated "LOCK" button (if available) or a specific button combination.
- In lock mode, the display will continue to show the current temperature, but buttons will be unresponsive until unlocked.
6. Wartung
Proper maintenance ensures the longevity and accuracy of your HENDI thermometer.
- Reinigen der Sonde: After each use, clean the stainless steel probe thoroughly with warm soapy water. Rinse and dry completely. The probe can be wiped with a damp Tuch.
- Reinigen des Hauptgeräts: Wischen Sie das Hauptgerät mit einem weichen, damp cloth. Do NOT immerse the main unit in water or place it under running water. Avoid abrasive cleaners or solvents.
- Lagerung: Store the thermometer and probe in a clean, dry place when not in use. Keep the probe tip protected to prevent damage.
- Batteriewechsel: When the display dims or the device stops functioning, replace the battery. Follow the battery installation steps in Section 4.1.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Display ist leer oder dunkel. | Schwache oder leere Batterie. Batterie falsch eingesetzt. | Replace the battery. Ensure battery is inserted with correct polarity. |
| Inaccurate temperature readings (e.g., showing +50°C initially). | Probe not fully inserted. Probe or cable damage. Environmental interference. | Ensure the probe jack is fully seated. Check probe and cable for visible damage. Try testing in a known temperature environment (e.g., ice water for 0°C). If the issue persists, the probe or unit may be faulty. |
| Der Alarm ertönt nicht. | Alarm volume too low or muted. Target temperature not set correctly. | Check if there's a volume setting (unlikely for this type of device, but check manual if available). Re-set the target temperature. |
| Tasten reagieren nicht. | Device is in Lock Mode. Battery issue. | Deactivate Lock Mode. Replace battery. |
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | 271346 |
| Marke | Hendi |
| Temperaturbereich | 0 °C bis 300 °C (32 °F bis 572 °F) |
| Temperaturauflösung | 0.1°C |
| Sondenlänge | 150 mm |
| Sondenmaterial | Edelstahl |
| Haupteinheitsmaterial | Edelstahl (Außenseite) |
| Abmessungen (L x B x H) | 2.6 x 11.9 x 23.1 cm (approx. 65x70x17 mm for the unit itself) |
| Gewicht | 118 Gramm |
| Stromquelle | Battery Powered (Battery included) |
| Heat Resistance (Probe) | Up to 250°C (Oven-safe) |
| Ursprungsland | China |
9. Garantie und Support
For warranty information, please refer to the documentation included with your purchase or visit the official HENDI website. HENDI provides high-quality products and exceptional service.
If you encounter any issues not covered in this manual or require further assistance, please contact HENDI customer support through their official channels. Always provide your product model number (271346) when seeking support.
You can find more information about HENDI products and support at: www.hendi.eu
