Prime TNOREM02

Prime TNOREM02 Fernbedienung für den Außenbereich mit 2 Steckdosen und Funksender – Benutzerhandbuch

Model: TNOREM02

Einführung

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Sicherheitshinweise

Bitte lesen und verstehen Sie alle Sicherheitshinweise, bevor Sie dieses Produkt verwenden. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder schweren Verletzungen führen.

Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Produkteigenschaften

Close-up of Prime TNOREM02 Receiver Outlets

Bild: Eine Nahaufnahme view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Aufstellen

  1. Ort auswählen: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Receiver anschließen: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Geräte verbinden: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattagDie Gesamtleistung der angeschlossenen Geräte überschreitet nicht 1875 Watt.
  4. Sender vorbereiten: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Bedienungsanleitung

Using the Prime TNOREM02 is straightforward:

Wartung

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Bringen Sie den Batteriefachdeckel wieder fest an.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Fehlerbehebung

ProblemMögliche UrsacheLösung
Devices do not turn ON/OFF.
  • Die Batterie des Senders ist leer oder falsch eingesetzt.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Überlastschutz ausgelöst.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Reduzierte Funkreichweite.
  • Hindernisse zwischen Sender und Empfänger.
  • Schwache Senderbatterie.
  • Störungen durch andere drahtlose Geräte.
  • Platzieren Sie den Empfänger oder Sender so, dass Hindernisse minimiert werden.
  • Tauschen Sie die Senderbatterie aus.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Interner Komponentenfehler.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Technische Daten

BesonderheitDetail
ModellnummerTNOREM02
MarkePrime
Anzahl der Verkaufsstellen2 (3-prong grounded)
DrahttypSJTW 14/3 Gauge
SteckertypRight Angle, Grounded
VerwendungIm Freien
Max. Watt1875 Watt
Max Amps15 Amps
Max. Volt125 Volt
Maximale PS-Zahl1 / 3 HP
Drahtlose ReichweiteBis zu 80 Fuß
SenderbatterieCR2032 3V Button-Cell
Technische Daten8 x 6.2 x 2.1 Zoll (ungefähr)
Artikelgewicht0.01 ounces (for remote control)
KonnektivitätstechnologieBluetooth
ZertifizierungenNot explicitly detailed, but designed for outdoor electrical use.

Garantie und Support

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webBesuchen Sie die Website oder kontaktieren Sie deren Kundendienstkanäle.

Zugehörige Dokumente - TNOREM02

Vorview PRIME SmartOutlets + Fernbedienung – Benutzerhandbuch und regulatorische Informationen
Ausführlicher Leitfaden für PRIME SmartOutlets + Fernbedienung: Einrichtung, Synchronisierung, Garantie und Einhaltung der FCC/IC-Vorschriften. Erfahren Sie, wie Sie Ihre Smart-Home-Geräte nutzen und Fehler beheben.
Vorview Netzteil PRIME-750B: Kurzanleitung und Sicherheitshinweise
Ausführliche Anleitung für das Netzteil PRIME-750B mit wichtigen Sicherheitsinformationen, Installationsschritten, Anschlusshinweisen für Komponenten, Inbetriebnahme-Anweisungen und technischen Daten. Enthält Details zu elektrischer Sicherheit, Belüftung, Hardware-Kompatibilität und Schutzfunktionen.
Vorview PRIME 2-fach Steckdosenleiste mit USB-Ladegeräten – Benutzerhandbuch und Garantie
Ausführliche Anweisungen, regulatorische Informationen und Garantiedetails für die PRIME 2-fach Steckdosenleiste mit USB-Ladegeräten (Modell USB05) von Prime Wire & Cable, Inc.
Vorview PRIME SmartOutlets Installations- und Sicherheitsinformationen
Installationsanweisungen, Sicherheitsinformationen und Spezifikationen für ferngesteuerte Smart-Stecker für den Außenbereich von PRIME SmartOutlets. Inklusive Einrichtungsanleitung, App-Verbindung und Informationen zur Einhaltung gesetzlicher Vorschriften.
Vorview Prime TNRCCD21 Plug-in Receiver and Remote Control User Manual
Comprehensive user manual for the Prime TNRCCD21 plug-in receiver and remote control system. Includes setup instructions, operation guide, helpful tips, battery replacement, FCC/IC compliance, and warranty information.
Vorview Prime EZ-Set Digitaler Indoor-Timer TNIDP12: Benutzerhandbuch und Programmieranleitung
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.