Einführung
This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.
Sicherheitshinweise
WARNUNG:
Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.
- Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
- Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
- Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
- Kleinteile von Kindern fernhalten.
Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- 2 x Flexson Wall Brackets (FLXP1WB2021)
- Benutzerhandbuch (dieses Dokument)
Notiz: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.
Setup und Installation
Follow these steps to install your Flexson wall bracket:
- Bereiten Sie den Montageort vor: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
- Pilotlöcher bohren: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
- Wandhalterung anbringen: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
- Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
- Lautsprecher sichern: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
- Kabelmanagement: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.
Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.
Betrieb und Justierung
Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:
- Kippen: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
- Schwenkbar: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
- Umgekehrte Montage: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.
Wartung
To maintain the appearance and functionality of your Flexson wall bracket:
- Clean the bracket with a soft, dry cloth.
- Vermeiden Sie die Verwendung von scheuernden Reinigungs- oder Lösungsmitteln, da diese die Oberfläche beschädigen können.
- Überprüfen Sie regelmäßig alle Befestigungsschrauben, um sicherzustellen, dass sie fest angezogen und sicher befestigt sind.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Speaker feels unstable or loose. | Mounting screws are not tight enough, or incorrect wall anchors were used. | Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type. |
| Schwierigkeiten beim Einstellen der Neigung oder Schwenkfunktion. | Mechanism may be stiff or overtightened. | Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions. |
Technische Daten
- Modellnummer: FLXP1WB2021
- Kompatibilität: Sonos Play:1 Speakers
- Material: Stahl
- Farbe: Schwarz
- Neigungseinstellung: 15° downwards
- Schwenkeinstellung: 40° links, 40° rechts
- Produktabmessungen: 5.47 x 3.62 x 1.77 Zoll (139 x 92 x 45 mm)
- Artikelgewicht: 7 Unzen (198 Gramm)
- Hersteller: FLEXSON
Garantie und Support
For warranty information and technical support, please refer to the official Flexson webBesuchen Sie unsere Website oder kontaktieren Sie Ihren Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
