APS IB-F5176A 5-Inch Aluminum iBoard Running Boards User Manual

1. Produktüberschreitungview

The APS IB-F5176A iBoard running boards are designed to provide a secure and comfortable step for your vehicle. Constructed from 100% aircraft-grade 6061-T6 aluminum, these running boards offer excellent corrosion protection, durability, and strength, supporting up to 500 lbs. They feature a 5-inch wide corrugated non-slip step pad that covers the entire board, ensuring a slip-proof surface for all users.

Image 1.1: APS IB-F5176A 5-inch Aluminum iBoard Running Boards shown installed on a red Ford F-150 Super Cab truck, highlighting the 5-inch width.

2. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• Two (2) iBoard running boards
• Montagehalterungen
• Hardware-Kit
• Installationshandbuch (dieses Dokument)

3. Fahrzeugkompatibilität

These running boards are specifically designed for the following vehicle model:

• Ford F-150 Super Cab (2009-2014)

A Super Cab typically features two full-size front doors and two smaller, rear-hinged (suicide) rear doors. Ensure your vehicle matches this configuration for proper fitment.

Image 3.1: Compatibility diagram illustrating the Super Cab configuration (2 full-size doors and 2 suicided rear doors) for which this product is designed.

4. Funktionen

• Material: 100% aircraft-grade 6061-T6 aluminum for superior strength and corrosion resistance.
• Step Pad: 5-inch wide corrugated non-slip step pad provides full coverage for secure footing.
• Tragfähigkeit: Engineered to support up to 500 lbs.
• Design: Clean, low-profile design with a silver aluminum finish.

Abbildung 4.1: Detailansicht view of the iBoard's contemporary design and 5-inch width.

Image 4.2: Diagram highlighting key features such as the full-length secured step pad and available sizes.

Image 4.3: Close-up of the installed running board, showcasing the textured step pad.

5. Installationsanleitung

Installation of the APS IB-F5176A iBoard running boards is designed for a DIY process, typically taking approximately one hour. The mounting system utilizes rocker panel mounts.

5.1 Allgemeine Installationsschritte:

1. Alle Komponenten auspacken und anhand der Packungsinhaltsliste überprüfen.
2. Identify the mounting points on your vehicle's rocker panels.
3. Attach the mounting brackets to the vehicle. It is recommended to leave all bolts loose initially to allow for adjustment.
4. Position the iBoard running boards onto the attached brackets. The bracket holes are slotted to facilitate alignment.
5. Once the running boards are properly aligned and positioned, tighten all bolts securely. Avoid over-tightening the square bolt nuts for the running board to prevent damage to the aluminum rail.

Note: Detailed, step-by-step instructions with diagrams are typically included in the physical installation manual provided with the product. Refer to that document for precise vehicle-specific instructions.

6. Bedienungsanleitung

The iBoard running boards provide a stable and wide platform to assist with entering and exiting your truck. Simply step onto the board when needed. The non-slip surface ensures a secure footing in various weather conditions.

Image 6.1: A person demonstrating the use of the running board for comfortable entry into the vehicle.

7. Wartung

To ensure the longevity and appearance of your iBoard running boards, follow these maintenance guidelines:

• Reinigung: Regularly clean the running boards with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the aluminum finish or the non-slip pad.
• Inspektion: Periodically inspect all mounting hardware for tightness. Re-tighten any loose bolts to maintain stability and safety.
• Korrosionsschutz: The aircraft-grade aluminum construction provides inherent corrosion resistance. However, regular cleaning, especially after exposure to road salt or harsh environments, will help maintain its integrity.

Image 7.1: A truck equipped with iBoard running boards navigating a challenging environment, illustrating the product's durable construction.

8. Fehlerbehebung

Sollten Sie während der Installation oder Nutzung auf Probleme stoßen, beachten Sie bitte Folgendes:

• Passformprobleme: Double-check your vehicle's make, model, and cab configuration against the compatibility information (Section 3). Incorrect fitment is often due to an incompatible vehicle type.
• Loose Boards: Ensure all mounting bolts are tightened according to the installation instructions. Re-inspect all connection points.
• Noise/Rattling: Verify that all components are securely fastened and that no parts are making contact with the vehicle's undercarriage or other components.
• Beschädigte Komponenten: If any part arrived damaged or appears defective, contact the manufacturer or seller for assistance.

9. Spezifikationen

10. Garantie und Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact APS customer service directly. The EU Spare Part Availability Duration is 5 Years.