Lumenier DJI T600 Inspire 1 Quadcopter Instruction Manual

Einführung

The DJI Inspire 1 is an advanced, all-in-one flying platform designed for aerial filmmaking. It features a 4K video camera, a 3-axis stabilized gimbal, and a comprehensive remote control system. This quadcopter is engineered for stable flight and high-quality imaging, providing a complete tool for capturing stunning aerial content.

Image: DJI Inspire 1 Quadcopter. This image shows the complete DJI Inspire 1 quadcopter with its landing gear down.

1. Aufbau und Montage

1.1 Lieferumfang

Vor Beginn der Montage sicherstellen, dass alle Komponenten vorhanden sind:

• DJI Inspire 1 Quadcopter
• Transmitter (Remote Controller) For Inspire 1 Quadcopter
• Zenmuse X3 Gimbal And Camera Unit (Inspire 1 Variant)
• Mobilgerätehalter
• TB47B Intelligent Flight Battery For Inspire 1 (99.9Wh)
• ND Filter
• Flight Battery Charger
• Charging Cable For Transmitter
• Netzkabel
• 4 Spare Propeller CW/CCW Pairs

1.2 Turning On and Deactivating Travel Mode

Follow these steps to power on the aircraft and prepare for flight:

1. Take the aircraft, remote controller, and intelligent flight battery out of the case.
2. Place the aircraft on a level surface.
3. Insert the intelligent flight battery into the aircraft.
4. Turn on the remote controller by pressing the power button once, then holding it down for three seconds.
5. Turn on the aircraft in the same manner: press the power button once, then hold it down for three seconds.
6. To deactivate travel mode, quickly flip the transformation switch on the remote controller four times. The aircraft will transition to landing mode.

Wichtig: Do not unlock travel mode when the Inspire 1 is on a carpeted surface.

To turn off the aircraft, press the power button once, then hold it down for three seconds.

1.3 Mounting the Gimbal and Camera

The Zenmuse X3 Gimbal and Camera Unit is crucial for stable and high-quality imaging:

1. Unlock and remove the gimbal protector.
2. Remove the protective cover from the camera lens.
3. Align the white line on the top of the gimbal with the white line on the gimbal lock.
4. Insert the gimbal and twist the locking mechanism to the left to secure it.
5. Legen Sie die Micro-SD-Karte in die Kamera ein.
6. If shooting in bright conditions, attach the ND filter. First, remove the original lens cover by twisting it to the left, then replace it with the ND filter.

Image: Zenmuse X3 Gimbal and Camera Unit. This image displays the detachable gimbal and camera unit for the Inspire 1.

1.4 Mounting Propellers and Propeller Locks

Proper propeller installation is vital for flight safety:

1. Place the gray propellers on the gray screws and turn clockwise to tighten. Twist the propeller to ensure it is firmly secured.
2. Place the black propellers on the black screws and twist counter-clockwise to tighten.
3. When mounting the propeller locks, align the tips of the propeller lock with the ventilation holes on the motor and press the propeller lock onto the nut of the propeller.
4. Press the propeller lock firmly against the motor. Examine to ensure that each propeller lock is secure before each flight.

1.5 Mounting a Mobile Device in the Holder

The mobile device holder allows for real-time viewing und Kontrolle:

1. Expand the mobile device holder to accommodate your device.
2. Place the mobile device into the holder and secure it by pushing down on the top.
3. Connect the mobile device's USB cord to the device and the other end to the remote controller.
4. For smaller devices, pull down on the brackets and expand the mobile device holder to fit.

Image: DJI Inspire 1 Remote Controller. This image displays the remote controller with a mobile device mounted, used for flight control and live video feed.

1.6 Charging the Remote Controller with the Intelligent Flight Battery

You can charge the remote controller using the intelligent flight battery, especially useful outdoors:

1. Connect one end of the charging cable to the intelligent flight battery.
2. Connect the other end to the remote controller.
3. Turn on the intelligent battery.
4. The battery level LED indicators on the remote controller will light up sequentially and then glow solid white when fully charged.

Image: DJI Inspire 1 Intelligent Flight Battery. This image shows the TB47B Intelligent Flight Battery, used to power the quadcopter and charge the remote controller.

2. Operating the Inspire 1 Quadcopter

2.1 Flight Features and Capabilities

The Inspire 1 is designed for advanced aerial performance and imaging:

• Ready-To-Fly System: The Inspire 1 is a complete system, ready for immediate use after basic setup.
• Transforming Design: Strong carbon fiber arms lift out of sight during flight, providing an unrestricted 360° view für die Kamera.
• 4K Video Camera: Capture stunning 4K video and 12-megapixel photos. The camera system is detachable for transport and future upgrades.
• Live HD View: A real-time 720p HD feed from the camera is displayed on your mobile device, allowing for precise framing of shots.
• Optische Flusspositionierung: Utilizes downward-facing sensors for stable flight close to the ground, enabling indoor flight and low-altitude hovering without GPS.
• Reaktionsschnelle Bedienelemente: The remote controller features sensitive control sticks for precise flight maneuvers and dedicated buttons for instant photo and video capture.
• Dual Operator Mode: A second remote controller can be used to allow a dedicated camera operator to control the gimbal and camera independently, while the pilot focuses on flight.

3. Wartung

Regular maintenance ensures the longevity and safe operation of your Inspire 1:

• Batteriepflege: Regularly charge and discharge the intelligent flight battery to maintain its health. If the battery is not working, try fully charging and discharging it. Connect the battery to the charger and push the power button while connected to see if it starts. If not, connect the battery to the charger and wait for at least 10 minutes.
• Propellerinspektion: Before each flight, ensure all propellers and propeller locks are securely attached and free from damage. Replace any damaged propellers immediately.
• Gimbal und Kamera: Halten Sie Gimbal und Kameraobjektiv sauber und frei von Staub und Schmutz. Verwenden Sie zum Reinigen ein weiches, trockenes Tuch.
• Firmware-Updates: Überprüfen Sie regelmäßig die offizielle DJI-Website. website for firmware updates for both the aircraft and the remote controller to ensure optimal performance and access to new features.

4. Fehlerbehebung

Häufige Probleme und ihre Lösungen:

• Aircraft Not Powering On:
  1. Ensure the intelligent flight battery is fully charged.
  2. Try fully charging and discharging the battery.
  3. Connect the battery to the charger and push the power button while connected to see if it starts.
  4. Connect the battery to the charger and wait for at least 10 minutes.
  5. Insert the battery into the Inspire 1 and attempt to turn it on.
• Fernbedienung verbindet sich nicht:

  Ensure both the aircraft and remote controller are powered on correctly. If they do not link, power both devices off and on again, and attempt to re-link them according to the quick start guide.

• Instabiler Flug/Abdriften:

  Perform a compass calibration in an open area away from magnetic interference. Check propellers for damage or improper installation.

• Kein Live-Video-Feed:

  Ensure your mobile device is correctly connected to the remote controller via USB and the DJI GO app is running. Check for any loose connections or app errors.

5. Spezifikationen

6. Garantie und Support

For warranty information, technical support, or service inquiries, please refer to the official Lumenier or DJI support channels. Contact details can typically be found on the manufacturer's weboder über Ihre Verkaufsstelle.