Einführung
The Foseal WiFi OBD2 Scanner is a diagnostic tool designed to read and clear engine trouble codes from your vehicle's On-Board Diagnostics II (OBD-II) system. This device connects wirelessly to your iOS or Android smartphone or tablet, allowing you to monitor various vehicle parameters and diagnose issues indicated by the "Check Engine Light." It supports all OBD-II protocols, making it compatible with a wide range of vehicles.
Produkt überview
The Foseal WiFi OBD2 Scanner is a compact, black device with a standard OBD-II connector. It features indicator lights on its surface and connects to your mobile device via a dedicated WiFi signal.
Figure 1: Foseal WiFi OBD2 Scanner, showing its compact design and indicator lights.
Abbildung 2: Nahaufnahme view of the Foseal WiFi OBD2 Scanner's OBD-II connector, designed to plug into a vehicle's diagnostic port.
Installationshandbuch
- Suchen Sie den OBD-II-Anschluss: Der OBD-II-Anschluss befindet sich üblicherweise unter dem Armaturenbrett auf der Fahrerseite Ihres Fahrzeugs. Sollten Sie ihn nicht finden, konsultieren Sie die Bedienungsanleitung Ihres Fahrzeugs.
- Schließen Sie den Scanner an: Firmly insert the Foseal WiFi OBD2 Scanner into your vehicle's OBD-II port. Ensure a secure connection.
- Zündung einschalten: Turn your vehicle's ignition key to the "ON" position (do not start the engine). The scanner's indicator lights should illuminate, indicating it is powered on.
- Laden Sie die App herunter: Download a compatible OBD-II diagnostic app on your iOS or Android device. Recommended apps include "OBD Car Doctor" and "OBD Fusion" for iOS, and "Torque Lite"/"Torque Pro" and "DashCommand" for Android.
- Verbindung über WLAN herstellen:
- Go to your device's WiFi settings.
- Look for a WiFi network named "WIFI_OBDII" or similar.
- Connect to this network. It is typically an unsecured network.
- For some iOS devices, you may need to manually configure the IP address. Set IP Address to 192.168.0.11, Subnet Mask to 255.255.255.0, and Router to 192.168.0.10.
- Starten Sie die App: Open your chosen OBD-II diagnostic app.
- Configure App Settings (if necessary): In the app's settings, ensure the connection type is set to "WiFi" and the device is recognized (e.g., "ELM327 Generic").
Video 1: A detailed guide on how to use OBD Car Doctor and OBD Fusion apps with the Foseal WiFi OBD2 Scanner on iOS devices. This video covers specific app settings and connection procedures for iOS users.
Bedienungsanleitung
- Mit dem Fahrzeug verbinden: Ensure the Foseal WiFi OBD2 Scanner is securely plugged into the OBD-II port and the vehicle ignition is ON.
- Mit App verbinden: Open your diagnostic app and initiate the connection to the "WIFI_OBDII" network.
- Diagnosefehlercodes (DTCs) lesen: Navigate to the "Diagnostic" or "Trouble Codes" section within the app. The app will scan your vehicle's Engine Control Unit (ECU) for stored codes.
- Codes interpretieren: Each code (e.g., P0420) corresponds to a specific issue. The app will often provide a brief description. For detailed information, you may need to search online for the specific code.
- View Live-Sensordaten: Access the "Dynamic Parameters" or "Live Data" section to monitor real-time vehicle data such as Engine RPM, Coolant Temperature, Fuel System Status, Intake Manifold Pressure, Air Flow Rate, Intake Air Temperature, and O2 sensor voltages.
- Fehlercodes löschen: After diagnosing and resolving an issue, you can clear the trouble codes from the ECU using the "Clear" or "Clear Trouble Codes" function in the app. This will turn off the "Check Engine Light."
Wartung
- Reinigung: Wischen Sie das Gerät mit einem weichen, trockenen Tuch ab. Verwenden Sie keine flüssigen Reiniger oder Lösungsmittel.
- Lagerung: Bewahren Sie den Scanner bei Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Firmware-Updates: Überprüfen Sie die Angaben des Herstellers website or app store for any available firmware updates for the device or software updates for the diagnostic app to ensure optimal performance and compatibility.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät lässt sich nicht einschalten. | Improper connection to OBD-II port; vehicle ignition not on. | Ensure the scanner is firmly plugged into the OBD-II port. Turn the vehicle ignition to the "ON" position. |
| Cannot connect to "WIFI_OBDII" network. | WiFi on mobile device is off; incorrect IP settings (iOS). | Verify WiFi is enabled on your device. For iOS, manually configure IP settings as described in the Setup Guide. Wait 10 seconds for the WiFi connection to establish. |
| App does not connect to the scanner. | Incorrect app settings; app malfunction. | Check app communication settings (WiFi, ELM327 Generic). Close and restart the app. Ensure the app is compatible with your device and the Foseal scanner. |
| Ungenaue oder fehlende Messwerte. | Loose connection; incompatible vehicle protocol. | Ensure the scanner is securely connected. While the scanner supports all OBD-II protocols, some older or specific vehicle models might have compatibility nuances. Try a different compatible app. |
Technische Daten
- Marke: Foseal
- Modell: Foseal (B00W0SDLRY)
- Konnektivität: W-lan
- Kompatibilität: iOS, Android (Supports all OBDII protocols)
- Abmessungen: 3.54 x 1.97 x 0.98 Zoll
- Artikelgewicht: 1.6 Unzen
- Energiequelle: Adapter (via OBD-II port)
- Unterstützte Protokolle: Alle OBDII-Protokolle
Garantie und Support
The Foseal WiFi OBD2 Scanner comes with a one-year guarantee. For any quality issues or support inquiries, please contact Foseal customer service. Your satisfaction is our total goal.
Contact information: Foseal.inc@hotmail.com (response within 24 hours on business days).
