1. Einleitung
The Laney L5-STUDIO is a single-ended Class 'A' tube amplifier head designed for both home and studio use. It features Laney's unique T-USB technology, allowing direct interface with any Digital Audio Workstation (DAW) across various platforms. The amplifier can operate silently using its high-quality internal dummy load, making it suitable for use at any time without disturbing others. It delivers a range of clean, crisp, dynamic, and open guitar tones, responding effectively to playing dynamics.
Bild: Intern view showing the glowing vacuum tubes, indicative of the amplifier's tube-driven design.
2. Sicherheitshinweise
- Stromversorgung: Stellen Sie sicher, dass amplifier is connected to a power supply with the correct voltage as indicated on the unit. Use only the provided power cable or an approved replacement.
- Belüftung: Blockieren Sie keine Lüftungsöffnungen. Sorgen Sie für ausreichende Luftzirkulation um das Gerät herum. ampKühlmittel, um eine Überhitzung zu verhindern.
- Feuchtigkeit: Setzen Sie die amplifier to rain, moisture, or excessive humidity. Avoid placing liquid containers on or near the unit.
- Wartung: Refer all servicing to qualified service personnel. Do not attempt to service the unit yourself, especially due to high internal voltages.
- Lautsprecheranschluss: Verbinden Sie immer die amplifier to an appropriate speaker cabinet before powering on, unless using the internal dummy load for silent operation or headphones. Failure to do so can damage the ampschwerer.
- Hitze: Der amplifier's tubes generate heat during operation. Avoid touching hot surfaces and allow sufficient cooling time after use.
3. Funktionen
The Laney L5-STUDIO amplifier head incorporates several key features for versatile performance:
- Twin channel design for diverse tonal options.
- Passive Bass, Middle, and Treble EQ controls for comprehensive tone shaping.
- Bright switch and global Tone control for additional sonic adjustments.
- Hand-selected ECC83 and EL84 tubes for authentic tube tone.
- Totally silent operation capability via an internal dummy load.
- Real tube tone direct into your DAW using unique T-USB technology.
- On-board studio quality reverb.
- Switchable FX loop for integrating external effects pedals.
- FS2-mini footswitch supplied for remote control of channels and reverb.
- Lionheart embroidered slip cover included for protection.
4. Einrichtung
4.1 Auspacken und Aufstellen
Entfernen Sie vorsichtig die amplifier from its packaging. Place the unit on a stable, level surface, ensuring adequate space for ventilation around the sides and rear.
4.2 Stromanschluss
Image: Standard IEC power cable used to connect the amplifier to a mains power outlet.
Connect the supplied power cable to the IEC inlet on the rear panel of the amplifier and then to a suitable mains power outlet. Ensure the power switch on the rear panel is in the 'OFF' position before connecting.
4.3 Speaker Cabinet Connection
The L5-STUDIO is an amplifier head and requires an external speaker cabinet for audible output (unless using headphones or the internal dummy load). Connect a speaker cable from the appropriate speaker output on the rear panel to your speaker cabinet. Ensure the impedance of your cabinet matches the selected output on the amplifier (e.g., 8 Ohm output to an 8 Ohm cabinet).
4.4 Guitar Connection
Image: Standard 1/4-inch instrument cable for connecting a guitar.
Connect your guitar to the 'INPUT' jack on the front panel using a high-quality instrument cable.
4.5 Fußschalteranschluss
Image: The supplied FS2-mini footswitch for remote control.
Connect the supplied FS2-mini footswitch to the 'FS2' input on the rear panel. This allows remote switching between channels and activating/deactivating the reverb effect.
4.6 USB Connection (for DAW)
For direct recording or re-amping with a DAW, connect a USB cable from the 'USB' port on the rear panel to your computer. The L5-STUDIO's T-USB technology provides a direct interface for recording tube tone.
5. Bedienungsanleitung
5.1 Bedienelemente an der Vorderseiteview
Image: Front panel of the L5-STUDIO, showing input jacks, control knobs, and switches.
- INPUT (HI/LO): Connect your guitar here. 'HI' is for standard output guitars, 'LO' for higher output or for a cleaner sound.
- SAUBERES VOLUMEN: Controls the output level of the clean channel.
- HELL-Schalter: Adds high-end sparkle to the clean channel.
- FAHRT: Controls the amount of gain/overdrive on the drive channel.
- LAUTSTÄRKE: Controls the output level of the drive channel.
- BASS, MITTE, HÖHE: Passive EQ controls to shape the low, mid, and high frequencies.
- HALL: Controls the amount of the built-in digital reverb effect.
- TON: Global tone control that adjusts the overall high-frequency response of the ampschwerer.
- RUN Switch: Netzschalter für die ampschwerer.
5.2 Anschlüsse und Bedienelemente auf der Rückseite
Image: Rear panel of the L5-STUDIO, detailing power input, speaker outputs, FX loop, USB, and D.I. connections.
- POWER Inlet: IEC power input.
- SICHERUNG: Main fuse holder. Replace only with the specified type and rating.
- 0.5W / 5W Schalter: Selects the output wattage der amplifier. Use 0.5W for lower volume practice or recording, and 5W for louder applications.
- REVERB (FS2) / DRIVE (FS2) Inputs: Connect the FS2-mini footswitch here for remote control.
- FX-SCHLEIFE (SEND/RETURN): Connect external effects pedals here. 'SEND' goes to the input of your effect, 'RETURN' comes from the output of your effect.
- USB: Connect to a computer for direct recording or re-amping.
- DI OUT (XLR): Balanced XLR output for connecting directly to a mixing console or audio interface. Includes GND LIFT and +30dB switches.
- TELEFONE: Kopfhörerausgang für lautloses Üben.
- LAUTSPRECHERAUSGÄNGE: Schließen Sie externe Lautsprecherboxen an. Achten Sie auf die korrekte Impedanzanpassung.
5.3 Geräuschloser Betrieb
The L5-STUDIO features an internal dummy load, allowing the amplifier to be used without a speaker cabinet for silent practice via headphones or direct recording via USB/DI out. This feature ensures the amplifier's tubes are safely loaded even without a physical speaker connected.
6. Wartung
- Reinigung: Reinigen Sie die ampReinigen Sie die Außenseite des Verstärkers mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Röhrenaustausch: Vacuum tubes have a finite lifespan. If you notice a decrease in performance, excessive noise, or inconsistent tone, the tubes may need replacement. This should be performed by a qualified technician.
- Lagerung: Bei längerer Nichtbenutzung lagern Sie die amplifier in a dry, temperature-controlled environment. Use the provided slip cover to protect it from dust.
- Sicherungswechsel: Wenn das amplifier fails to power on, check the main fuse on the rear panel. Always replace with a fuse of the exact same type and rating.
7. Fehlerbehebung
- Kein Strom: Check the power cable connection, the power outlet, and the main fuse on the rear panel. Ensure the 'RUN' switch is engaged.
- Kein Ton:
- Ensure the speaker cabinet is correctly connected and the speaker cable is functional.
- Check guitar cable and guitar volume.
- Verify all volume controls on the ampDie Verstärker sind aufgedreht.
- If using headphones, ensure they are properly plugged in and the speaker output is not muted (if applicable).
- Excessive Hum/Noise:
- Check for faulty cables (guitar, speaker, FX loop).
- Ensure proper grounding. Try a different power outlet.
- Bewegen Sie den ampHalten Sie den Verstärker von anderen elektronischen Geräten fern, die Störungen verursachen könnten.
- Tubes may be microphonic or nearing end-of-life.
- Weak or Inconsistent Tone: This can often indicate aging or failing vacuum tubes. Consult a qualified technician for tube testing and replacement.
8. Spezifikationen
| Modell | L5-STUDIO |
| Ausgang Wattage | 5 Watt (umschaltbar auf 0.5 Watt) |
| Schläuche | ECC83 & EL84 (Hand selected) |
| Kanäle | Twin Channel (Clean & Drive) |
| EQ | Passive Bass, Middle, Treble |
| Hall | On-board Studio Quality Digital Reverb |
| Effektschleife | Umschaltbar |
| Konnektivität | USB (T-USB Technology), DI Out (XLR), Headphones, FS2 Footswitch |
| Kompatible Geräte | Gitarre |
| Stromquelle | Kabelgebundene Elektrik |
| Artikelgewicht | 22.05 Pfund (10 kg) |
| Technische Daten | 7.2 x 16 x 7.4 Zoll (18.3 x 40.6 x 18.8 cm) |
| Farbe | Blau |
9. Garantie und Support
Warranty information for the Laney L5-STUDIO amplifier head is typically provided with the product at the time of purchase. Please refer to the documentation included in your product packaging for specific warranty terms and conditions.
For technical support, service inquiries, or further assistance, please visit the official Laney Amplifizierung website or contact your authorized Laney dealer.
