BRESSER ExploreOne Metal Detector for Kids (Model 88-20001) Instruction Manual

Einführung

This manual provides essential information for the proper setup, operation, and maintenance of your BRESSER ExploreOne Metal Detector. Designed for junior explorers, this lightweight and adjustable metal detector is built to help discover hidden metallic objects.

Key features of your metal detector include:

• Detects objects up to 6 inches below the surface.
• Water-resistant base for use in damp Bedingungen.
• Different tones to distinguish various precious metals.
• Built-in LED light for enhanced visibility, detachable for use as a flashlight.
• Adjustable length to accommodate users of different heights.

Image: The BRESSER ExploreOne Metal Detector, showcasing sein blau-weißes Design.

Aufstellen

Lieferumfang

• ExploreOne Metal Detector unit

Einlegen der Batterie

The metal detector requires one 9V battery (not included). To install the battery:

1. Locate the battery compartment, typically on the handle or control unit.
2. Öffnen Sie die Abdeckung des Batteriefachs.
3. Setzen Sie eine neue 9V-Batterie ein und achten Sie dabei auf die richtige Polarität (+/-).
4. Schließen Sie den Batteriefachdeckel fest.

Montage

Your metal detector is designed for easy assembly and adjustment:

1. Connect the search coil to the lower stem.
2. Attach the lower stem to the main adjustable shaft.
3. Secure the control unit/handle to the top of the shaft.
4. Adjust the shaft length to a comfortable height for the user. Loosen the locking collar, extend or retract the shaft, and then tighten the collar to secure.
5. The LED light can be attached to the shaft for illumination or detached for use as a handheld flashlight.

Image: Close-up of the metal detector's search coil and adjustable lower shaft connection.

Bedienungsanleitung

Grundlegende Bedienung

To begin searching for metallic objects:

1. Turn on the metal detector using the power switch on the control unit.
2. Halten Sie den Detektor so, dass die Suchspule parallel zum Boden, etwa 1-2 Zoll über der Oberfläche, ausgerichtet ist.
3. Sweep the search coil slowly from side to side in overlapping motions.
4. When a metallic object is detected, the unit will emit an audible beep. The louder the beep, the closer you are to the object.

Detection Tones

The metal detector uses different tones to help identify various types of metals. Familiarize yourself with these tones by testing the detector on known metal objects (e.g., coins, aluminum foil, iron) before searching.

Verwendung von LED-Licht

The built-in LED light provides illumination in low-light conditions. It can be used while attached to the detector for searching at dusk or detached and used as a standalone flashlight for examining discoveries.

Wasserbeständigkeit

The search coil and lower stem are water-resistant, allowing for detection in shallow puddles or damp Boden. Notiz: The main control unit and battery compartment are not waterproof and should not be submerged.

Wartung

• Reinigung: After each use, wipe down the detector with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Ensure the search coil is clean of dirt and debris.
• Batteriepflege: Entfernen Sie die 9V-Batterie, wenn der Detektor längere Zeit nicht benutzt wird, um Auslaufen und Beschädigungen zu vermeiden.
• Lagerung: Store the metal detector in a cool, dry place away from direct sunlight and extreme temperatures.

Fehlerbehebung

Technische Daten

Garantie und Support

This product typically comes with a limited manufacturer's warranty. Please refer to the packaging or the manufacturer's official webDie genauen Garantiebedingungen finden Sie auf der Website.

For technical support, questions, or assistance, please contact BRESSER customer service. You may reach them at 866.252.3811.