MODSTER Vector SR48 Brushed Electric Racing Boat 2S RTR Benutzerhandbuch

Einführung

Vielen Dank für Ihren Einkauf.asing the MODSTER Vector SR48 Brushed Electric Racing Boat 2S RTR. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new racing boat. Please read this manual thoroughly before operating the boat to ensure optimal performance and safety.

The MODSTER Vector SR48 is a trendy 40 cm racing boat equipped with a powerful brushed motor. Its water-cooled motor system ensures efficient operation, and the body cover is easily removable for convenient battery changes. A key feature of this boat is its self-righting capability, allowing it to automatically flip back upright after capsizing. It supports both forward and reverse motion and can reach speeds of up to 30 km/h.

Sicherheitswarnungen

Failure to follow these safety instructions may result in injury or damage to the product or property.

Never operate the model on public roads or thoroughfares as this could impede traffic and create hazardous situations.
Never use the model in crowded areas, near or on people or animals to avoid property damage and/or personal injury.
Stellen Sie stets sicher, dass der Arbeitsbereich frei von Hindernissen und anderen Wasserfahrzeugen ist.
Do not operate the boat in saltwater, as this can damage internal components.
Keep hands, hair, and loose clothing away from the propeller when the boat is powered on.
Always disconnect the battery after use and before performing any maintenance.
Supervise children at all times when operating the boat.
Versuchen Sie nicht, die elektronischen Bauteile des Bootes zu verändern oder zu zerlegen.

Packungsinhalt

Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

MODSTER Vector SR48 Brushed RTR Racing Boat
Integrated 390A Brushed Motor
Integrated Motor Controller/Receiver
Integrated 9g Steering Servo
2.4-GHz-Sender (Fernbedienung)
2S LiPo Ladegerät
2S 850 mAh 7.4V Lithium-ion Battery
Bootsständer
Bedienungsanleitung (Deutsch und Englisch)
Ersatzpropeller

Notiz: You will need 1.5V Mignon (AA) batteries for the remote control (not included).

Aufstellen

1. Laden des Akkus

Before first use, fully charge the included 2S 850 mAh 7.4V Lithium-ion battery using the provided 2S LiPo charger. Follow the charger's instructions carefully. Do not overcharge the battery.

2. Installing Batteries in the Transmitter

Open the battery compartment on the back of the 2.4 GHz transmitter. Insert 1.5V Mignon (AA) batteries (not included), ensuring correct polarity. Close the battery compartment securely.

3. Einbau der Bootsbatterie

Carefully remove the body cover of the boat. Connect the fully charged 2S Li-ion battery to the boat's power connector, ensuring a secure fit. Place the battery inside the designated compartment. Reattach the body cover securely to prevent water ingress.

MODSTER Vector SR48 Racing Boat on a wooden dock with a hand holding the remote control.

Image: The MODSTER Vector SR48 Racing Boat placed on its stand on a wooden dock, with a hand holding the remote control nearby, illustrating preparation for operation.

4. Erstinspektion

Before placing the boat in water, perform a quick inspection:

Ensure the propeller is free from obstructions and spins freely.
Check that the rudder moves smoothly when the steering wheel on the transmitter is turned.
Verify that the body cover is properly sealed.

Bedienungsanleitung

1. Einschalten

First, turn on the transmitter. Then, place the boat in the water. The boat's power system will activate automatically upon contact with water (water sensor activation). Ensure the boat is placed in water before attempting to operate it.

2. Grundlegende Steuerelemente

Gashebel: Pull the trigger to move forward. Push the trigger to move backward (reverse).
Lenkrad: Turn the steering wheel left to turn the boat left, and right to turn the boat right.

Diagram showing the MODSTER Vector SR48 boat and remote control with German text indicating features.

Image: An illustrative diagram highlighting key features of the MODSTER Vector SR48, including its speed capability and Ready-To-Run (RTR) status, alongside the boat and remote control.

3. Selbstaufrichtungsfunktion

The MODSTER Vector SR48 is designed with a self-righting feature. If the boat capsizes during operation, simply apply a small amount of throttle or steer the boat, and it will automatically flip back upright, allowing you to continue racing without manual intervention.

A person placing the MODSTER Vector SR48 boat into water, demonstrating the self-righting feature.

Image: A person carefully placing the MODSTER Vector SR48 boat into the water, illustrating the initial launch and the boat's self-righting capability.

4. Betriebsumgebung

Operate the boat in calm, fresh water bodies free from debris, strong currents, or excessive wind. Avoid operating near swimmers, wildlife, or other watercraft. Maintain a clear line of sight to the boat at all times.

Wartung

1. Nach jeder Verwendung

Nehmen Sie das Boot nach Gebrauch sofort aus dem Wasser.
Disconnect the battery from the boat and remove it.
Wipe down the boat's exterior with a soft, dry cloth to remove any water or debris.
Ensure the internal compartments are dry. If water has entered, carefully dry it out.
Allow the boat and battery to cool down before storing.

2. Propeller and Rudder Inspection

Regularly inspect the propeller for any damage or entanglement (e.g., weeds, fishing line). Clean as necessary. Check the rudder for smooth movement and ensure all linkages are secure.

3. Speicherung

Store the boat in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from both the boat and the transmitter if storing for extended periods.

Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Das Boot reagiert nicht auf den Sender.	Sender nicht eingeschaltet. Boat battery not connected or discharged. Die Batterien des Senders sind schwach oder falsch eingesetzt. Boat not in water (water sensor).	Schalten Sie den Sender ein. Connect or charge the boat battery. Replace or correctly install transmitter batteries. Place the boat in water.
Boat moves slowly or lacks power.	Boat battery low. Propeller obstructed or damaged.	Recharge the boat battery. Propeller prüfen und reinigen/ersetzen.
Das Boot richtet sich nicht von selbst auf.	Insufficient throttle applied. Battery not properly secured.	Apply a small amount of throttle or steer. Ensure battery is securely placed in its compartment.
Wasser im Boot.	Body cover not properly sealed. Damage to hull.	Ensure body cover is securely latched. Inspect hull for cracks; repair if necessary.

Technische Daten

Besonderheit	Detail
Marke	MODSTER
Modellnummer	282434
Name des Produktmodells	Vector SR48 Elektro Brushed
Farbe	Schwarz
Abmessungen (L x B x H)	44.6 x 12.1 x 14 cm (17.56 x 4.76 x 5.51 Zoll)
Artikelgewicht	800 Gramm (1.76 Pfund)
Material	Plastik
Motortyp	390A Brushed Motor (Water-cooled)
Akku-Typ	2S 850 mAh 7.4V Lithium-ion (Included)
Maximalgeschwindigkeit	Bis zu 30 km/h (18.6 mph)
Kontrollsystem	2.4 GHz Funksteuerung
Merkmale	Self-righting function, Forward/Reverse capability

Vorderseite view of the MODSTER Vector SR48 Brushed Electric Racing Boat.

Abbildung: Eine detaillierte Vorderansicht view of the MODSTER Vector SR48 Brushed Electric Racing Boat, showcasing sein elegantes Design und Branding.

Garantie und Support

Information regarding specific warranty terms and conditions for the MODSTER Vector SR48 Brushed Electric Racing Boat is not provided in the product description. Please refer to the included physical instruction manual or contact MODSTER customer support directly for warranty details and technical assistance.

For further support, please visit the official MODSTER website or contact their customer service department using the contact information provided in the product packaging or on their official channels.

MODSTER Vector SR48 Elektro Brushed