Legrand 138074 Manual Call Point Instruction Manual

1. Produktüberschreitungview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Abbildung 1: Vorderseite view of the Legrand 138074 Manual Call Point.

2. Sicherheitshinweise

Bitte lesen und verstehen Sie alle Sicherheitshinweise, bevor Sie dieses Gerät installieren oder in Betrieb nehmen. Die Nichtbeachtung dieser Hinweise kann zu Sachschäden, Verletzungen oder zum Tod führen.

• Professionelle Installation: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Stromabschaltung: Vor Installations-, Wartungs- oder Fehlersucharbeiten muss immer die Stromzufuhr zum Stromkreis unterbrochen werden.
• Bandtage Überprüfen Sie: Überprüfen Sie, ob die Stromversorgungsspannungtage entspricht den Spezifikationen des Geräts.
• Umgebungsbedingungen: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Komponentenintegrität: Verwenden Sie das Gerät nicht, wenn ein Teil beschädigt ist.

3. Packungsinhalt

Prüfen Sie beim Öffnen der Verpackung, ob alle Komponenten vorhanden und unbeschädigt sind:

• Legrand 138074 Manual Call Point (1 unit)
• Befestigungsschrauben (Menge wie geliefert)
• Bedienungsanleitung (dieses Dokument)

4. Einrichtung und Installation

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Montage

1. Bereiten Sie die Montagefläche vor: Ensure the surface is clean, dry, and flat.
2. Bohrpunkte markieren: Use the call point's base as a template to mark the positions for mounting screws.
3. Bohrlöcher: Drill pilot holes appropriate for the mounting screws.
4. Sichern Sie die Basis: Attach the call point's base securely to the wall using the provided screws.

4.2. Verkabelung

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.

Abbildung 2: Intern view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Endmontage

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Bedienungsanleitung

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Aktivieren Sie den Alarm: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Aktivierung überprüfen: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Evakuieren: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Wartung

Regular maintenance ensures the reliable operation of your manual call point.

• Sichtprüfung: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Reinigung: Clean the exterior of the call point with a soft, damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
• Funktionstests: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Komponentenaustausch: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Fehlerbehebung

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Spezifikationen

9. Garantieinformationen

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Unterstützung und Kontakt

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webWebsite:

Www.legrand.com

When contacting support, please have your product model number (138074) and any relevant purchase details ready.