Brodit 855164 Proclip Vehicle Mount Instruction Manual

1. Produktüberschreitungview

The Brodit 855164 Proclip is a vehicle-specific mounting base designed for secure and ergonomic placement of mobile devices in your car. This product is a two-part solution; it requires a separate, compatible Brodit device holder (for your smartphone, GPS, or tablet) to be screwed onto this mounting base.

The Proclip offers enhanced comfort and safety by positioning your mobile devices closer to you, making them easier to handle while driving. Its discreet and elegant design provides better visibility by keeping the windshield clear, unlike traditional suction cup mounts.

Zu den Hauptmerkmalen gehören:

• Two-Part Solution: Requires an additional Brodit device holder specific to your mobile device.
• Fahrzeugspezifisches Design: Ensures perfect compatibility and integration with your vehicle's dashboard.
• Schnelle Installation: Installs in approximately 1 minute without the need for special tools or drilling.
• Damage-Free Removal: Can be removed without leaving any traces or altering your dashboard.
• Improved Ergonomics and Safety: Positions devices optimally for visibility and ease of access.

Image 1.1: The Brodit 855164 Proclip Vehicle Mount with its accompanying gap opener tool.

2. Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Brodit 855164 Proclip Vehicle Mount
• Gap Opener Tool

3. Einrichtung und Installation

The Proclip is designed for quick and easy installation without damaging your vehicle's interior. Follow these steps carefully:

1. Montageort bestimmen: Refer to the specific instructions provided with your Proclip for the exact mounting location in your vehicle. The Proclip utilizes existing gaps in your dashboard.
2. Reinigen Sie die Oberfläche: Ensure the dashboard surface where the Proclip will be installed is clean and free of dust or grease.
3. Prepare the Gaps: Use the provided gap opener tool to gently widen the dashboard gaps where the Proclip's edges will be inserted. This makes insertion easier and prevents damage.
4. Insert the Proclip: Carefully insert the first edge of the Proclip into the designated dashboard gap. Apply gentle pressure until it is securely seated.
5. Secure the Second Edge: Guide the second edge of the Proclip into its corresponding dashboard gap. Ensure both edges are fully inserted and the mount feels stable.
6. Teststabilität: Gently tug on the installed Proclip to ensure it is firmly in place and does not wobble.
7. Attach Device Holder: Once the Proclip is securely mounted, you can screw your compatible Brodit device holder onto the pre-drilled holes on the Proclip's faceplate.

Image 3.1: The Brodit Proclip mount, illustrating the pre-drilled holes for attaching a device holder.

Image 3.2: The Brodit Proclip mount held in a hand, showing its compact size and approximate dimensions for reference during installation.

4. Bedienungsanleitung

Once the Brodit Proclip and your specific device holder are installed, using it is straightforward:

• Gerät einsetzen: Place your mobile device into the attached Brodit device holder according to its specific design (e.g., slide in, clip in).
• Adjust Angle (if applicable): If your device holder has an adjustable swivel or tilt mechanism, adjust it to your preferred viewing angle for optimal visibility and minimal glare.
• Gerät entfernen: When not in use, carefully remove your mobile device from the holder.

Always ensure your device is securely fastened in the holder before driving. Avoid adjusting the device or holder while the vehicle is in motion to maintain focus on the road.

5. Wartung

To ensure the longevity and proper function of your Brodit Proclip, follow these simple maintenance guidelines:

• Reinigung: Wipe the Proclip with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, as these can damage the plastic material.
• Befestigungselemente prüfen: Periodically check that the Proclip remains securely seated in the dashboard gaps and that the device holder is firmly screwed onto the Proclip. Tighten screws if necessary.
• Vermeiden Sie übermäßige Gewaltanwendung: Do not apply excessive force when inserting or removing devices, as this could stress the holder or the Proclip.

6. Fehlerbehebung

If you encounter any issues with your Brodit Proclip, consider the following common solutions:

• Proclip feels loose after installation:
  • Ensure both edges of the Proclip are fully inserted into the dashboard gaps.
  • Verify that the Proclip is the correct model for your specific vehicle. Vehicle-specific fit is crucial for stability.
• Difficulty inserting the Proclip:
  • Use the gap opener tool to gently create sufficient space in the dashboard gaps before attempting to insert the Proclip.
  • Ensure you are inserting the correct edge first as per your vehicle-specific instructions.
• Device holder wobbles on the Proclip:
  • Check that the screws attaching the device holder to the Proclip are tightened securely.
  • Ensure the device holder itself is not damaged or worn.

7. Spezifikationen

8. Garantie und Support

Brodit products are manufactured to high standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Brodit webDie Garantiebedingungen können je nach Region und Händler variieren.

For technical support, installation assistance, or inquiries regarding compatible device holders, please contact Brodit customer service or your authorized retailer. Contact information can typically be found on the Brodit official webauf der Website oder auf Ihrem Kaufbeleg.