Produkt überview
This manual provides detailed instructions for the installation, operation, and maintenance of your Winjet CTWJ-0043-BC Altezza Tail Lights, designed specifically for the Nissan Frontier 1998-2004 models. These tail lights are engineered to provide enhanced visibility and a modern aesthetic for your vehicle, ensuring compliance with SAE/DOT standards for street use.
Hauptmerkmale:
- Completed set includes Left and Right Sides.
- SAE/DOT Compliance for street use, ensuring legal and safe operation.
- Constructed from High Quality OEM Grade ABS Plastic for durability.
- Designed for bolt-on installation, requiring no modification for a plug-and-play setup.
- Wasserdichtes Design für zuverlässige Leistung unter verschiedenen Wetterbedingungen.
Kompatibilität
These tail lights are compatible with the following vehicle model:
- Nissan Frontier: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Abbildung 1: Automotive Fitment Guide. This image illustrates the compatible vehicle model, the Nissan Frontier from 1998 to 2004, ensuring proper fitment for the tail light assembly.
Setup und Installation
The Winjet Altezza Tail Lights are designed for a straightforward, bolt-on installation process. No complex wiring or vehicle modifications are typically required.
Benötigtes Werkzeug:
- Basic hand tools (e.g., socket wrench, screwdriver) as needed for existing tail light removal.
Installationsschritte:
- Vorbereitung: Ensure the vehicle's ignition is off and the parking brake is engaged. For safety, disconnect the negative terminal of the vehicle's battery.
- Remove Old Tail Lights: Locate and remove the screws or fasteners holding the existing tail light assembly in place. Carefully pull the assembly away from the vehicle body.
- Verkabelung trennen: Disconnect the electrical harness from the old tail light assembly. Note the position of each bulb (running lights, turn signals, reverse lights) if you need to transfer them.
- Transfer Bulbs (if applicable): If your new Winjet tail lights do not come with pre-installed bulbs, carefully transfer the bulbs from your original tail light assembly to the corresponding sockets on the new Winjet assembly. Ensure a secure fit.
- Connect New Tail Lights: Connect the vehicle's electrical harness to the new Winjet tail light assembly. The design ensures the same harness can be used without rewiring.
- Mount New Tail Lights: Align the new tail light assembly with the mounting points on the vehicle body. Secure it in place using the original screws or fasteners. Ensure a snug fit to prevent moisture ingress.
- Testfunktionalität: Reconnect the vehicle's battery. Test all light functions: running lights, brake lights, turn signals, and reverse lights, to ensure proper operation before driving.
Abbildung 2: Installation Features. This image highlights the "Same Harness | No Rewiring" feature, showing standard light bulbs, and the "Factory Bolt-On Fitment" with a close-up of a mounting bolt, simplifying the installation process.
Bedienungsanleitung
Once installed, the Winjet Altezza Tail Lights operate in conjunction with your vehicle's existing electrical system. They are designed to function automatically when the vehicle's lighting controls are activated.
Lichtfunktionen:
- Tagfahrlicht: Illuminate when the vehicle's headlights or parking lights are on, providing rear visibility.
- Blinker: Flash when the turn signal lever is activated, indicating a change in direction.
- Bremslichter: Illuminate brightly when the brake pedal is pressed, signaling deceleration or stopping.
- Rückfahrscheinwerfer: Illuminate when the vehicle is shifted into reverse gear, providing illumination and warning to others.
Abbildung 3: Tail Light Functions. This diagram clearly labels the positions of the Running Lights, Turn Signals, and Reverse Lights within the tail light assembly, illustrating their respective functions.
Wartung
To ensure the longevity and optimal performance of your Winjet Altezza Tail Lights, follow these simple maintenance guidelines:
- Regelmäßige Reinigung: Clean the outer lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
- Auf Schäden prüfen: Periodically check the tail light assemblies for any cracks, moisture inside the lens, or loose connections. Address any issues promptly.
- Lampenwechsel: If a bulb burns out (for models using replaceable bulbs), replace it with the correct type and wattage as specified by your vehicle's manufacturer or the original bulb. Ensure the replacement bulb is securely seated.
- Verkabelungsprüfung: Occasionally inspect the wiring harness for any signs of wear, fraying, or corrosion.
Fehlerbehebung
If you encounter issues with your Winjet Altezza Tail Lights, refer to the following common troubleshooting steps:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Lichter leuchten nicht | Blown fuse, faulty bulb, loose connection, damaged wiring. | Check vehicle's fuse box and replace any blown fuses. Inspect bulbs and replace if necessary. Ensure all electrical connections are secure. Check wiring for damage. |
| Lichter flackern oder werden schwächer | Loose connection, corroded terminals, low voltage. | Secure all connections. Clean any corroded terminals. Check vehicle's battery and charging system. |
| Feuchtigkeit im Inneren der Linse | Improper seal, condensation. | Ensure the tail light assembly is properly seated and sealed against the vehicle body. Small amounts of condensation may dissipate naturally; persistent moisture indicates a seal issue. |
| Turn signals flash rapidly | Burnt out turn signal bulb, incorrect bulb type. | Check and replace the turn signal bulb. Ensure the correct wattagEs wird eine Glühbirne verwendet. |
If the problem persists after attempting these solutions, it is recommended to consult a qualified automotive technician.
Technische Daten
| Attribut | Detail |
|---|---|
| Marke | Winjet |
| Modellnummer | CTWJ-0043-BC |
| Produktabmessungen (L x B x H) | 43.18 x 33.02 x 22.86 cm (17 x 13 x 9 Zoll) |
| Artikelgewicht | 1.81 kg |
| Außenverkleidung | Bearbeitet |
| Herstellerteilenummer | WJ20-0043-04 |
| Position | Left (Set includes Left and Right) |
| Lampentyp | LED |
| Lichtquellentyp | LED |
| Besondere Merkmale | Wasserdicht |
| Spezifische Verwendungen | Rücklichter |
| Fahrzeug-Servicetyp | Auto |
| Linsenfarbe | Klar |
| Overall Color | Schwarz/Transparent |
| UPC | 848524017964, 728276482633, 848524062841, 848063040430 |
Garantieinformationen
Winjet provides a 12 Monate Garantie Diese Garantie gilt für dieses Produkt. Sie deckt Herstellungsfehler ab und gewährleistet die bestimmungsgemäße Funktion des Produkts bei normalem Gebrauch. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
For specific terms and conditions of the warranty, please refer to the official Winjet webWebsite oder wenden Sie sich an den Kundendienst.
Kundenservice
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Winjet customer support through their official channels. Refer to the Winjet webDie aktuellsten Kontaktinformationen finden Sie auf dieser Webseite.
Hersteller: Winjet
WebWebsite: www.winjetinc.com
ASIN: B01A1500AI
Datum der Erstveröffentlichung: 24. März 2016
