NETGEAR Powerline 1000 Adapter Kit (PL1000-100PES) User Manual

1. Produktüberschreitungview

The NETGEAR Powerline 1000 Adapter Kit (PL1000-100PES) provides a simple solution to extend your internet network using your home's existing electrical wiring. This kit includes two Powerline 1000 adapters, enabling you to connect devices like smart TVs, gaming consoles, and computers to the internet in areas where Wi-Fi signals may be weak or unreliable.

Bild: Vorderseite view of the NETGEAR Powerline 1000 Adapter.

2. Einrichtung

2.1 Packungsinhalt

Überprüfen Sie, ob Ihr Paket die folgenden Artikel enthält:

• Two (2) NETGEAR Powerline 1000 Adapters (PL1000)
• Two (2) Ethernet cables
• Kurzanleitung (nicht in diesem Handbuch enthalten)

2.2 Installationsschritte

Follow these steps to set up your Powerline network:

1. Schließen Sie den ersten Adapter an: Plug one Powerline adapter directly into an electrical outlet near your internet router or modem. Do not use a power strip or extension cord, as this can degrade performance.
2. Verbindung zum Router/Modem herstellen: Use one of the provided Ethernet cables to connect the Powerline adapter to an available LAN port on your router or modem.
3. Schließen Sie den zweiten Adapter an: Plug the second Powerline adapter directly into an electrical outlet in the room where you want to extend your network.
4. Verbinden Sie Ihr Gerät: Use the second Ethernet cable to connect your network-enabled device (e.g., computer, smart TV, gaming console) to the second Powerline adapter.
5. Verbindung überprüfen: Wait for the Powerline LED on both adapters to turn solid green, indicating a successful connection.

Image: A NETGEAR Powerline 1000 Adapter plugged into a wall outlet, ready for connection.

Image: Diagram illustrating how two Powerline adapters connect to a router and an Ethernet-enabled device in different rooms, utilizing the home's electrical wiring.

3. Betrieb

3.1 LED-Anzeigen verstehen

The Powerline adapters feature LED indicators to show their status:

Bild: Vorderseite view of the Powerline 1000 Adapter showing the Power, Powerline, and Ethernet LED indicators.

3.2 Pairing Powerline Adapters

Your Powerline adapters are typically pre-paired from the factory. If they do not connect automatically (Powerline LED is off or blinking), you may need to pair them manually:

1. Plug both Powerline adapters into electrical outlets in the same room.
2. Press the Security button (often labeled 'Pair' or 'Security') on the side or bottom of the first adapter for 2 seconds. The Powerline LED will start blinking.
3. Within two minutes, press the Security button on the second adapter for 2 seconds. Its Powerline LED will also start blinking.
4. After a short period, the Powerline LEDs on both adapters should turn solid green, indicating a successful secure connection.

4. Wartung

4.1 Pflege und Reinigung

• Keep the adapters in a dry environment, away from excessive heat or moisture.
• Do not block the ventilation holes on the adapters.
• To clean, gently wipe the surface with a soft, dry cloth. Do not use liquid or aerosol cleaners.

4.2 Werksreset

If you experience persistent issues or wish to clear all settings, you can perform a factory reset:

Abbildung: Unten view of the Powerline 1000 Adapter, highlighting the Ethernet port and the recessed Factory Reset button.

1. With the adapter plugged into an electrical outlet, use a paperclip or similar pointed object to press and hold the recessed Werksrücksetzung -Taste ca. 10 Sekunden gedrückt halten.
2. Release the button when the LEDs briefly flash. The adapter will restart with factory default settings.

5. Fehlerbehebung

5.1 Häufige Probleme und Lösungen

• Keine Stromleitungsverbindung (Stromleitungs-LED aus):
  Ensure both adapters are plugged directly into wall outlets, not power strips. Try different outlets. Perform manual pairing as described in Section 3.2.
• Langsame Verbindungsgeschwindigkeit:
  Avoid plugging adapters into outlets on different electrical circuits if possible. Remove any high-power electrical appliances (e.g., washing machines, refrigerators) from outlets near the adapters, as they can cause interference.
• Kein Internetzugang:
  Verify that your router/modem is working correctly and has an active internet connection. Ensure the Ethernet cable between the first adapter and the router is securely connected. Check the Ethernet LED on both adapters.
• Adapter reagiert nicht:
  Unplug the adapter from the wall outlet, wait 10 seconds, and plug it back in. If the issue persists, perform a factory reset (Section 4.2).

6. Spezifikationen

6.1 Technische Daten

7. Garantie und Support

7.1 Garantieinformationen

NETGEAR products typically come with a limited hardware warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the warranty card included with your purchase or visit the official NETGEAR webWebsite.

7.2 Kundendienst

For further assistance, technical support, or to download the latest firmware and documentation, please visit the official NETGEAR support webAuf dieser Website finden Sie ausführliche FAQs, Anleitungen zur Fehlerbehebung und Kontaktinformationen zum Kundendienst.