Greenworks G40PSH 40V 2-in-1 Cordless Pole Saw and Hedge Trimmer Instruction Manual

1. Einleitung

This instruction manual provides essential information for the safe and effective operation, assembly, maintenance, and troubleshooting of your Greenworks G40PSH 40V 2-in-1 Cordless Pole Saw and Hedge Trimmer. Please read this manual thoroughly before first use and keep it for future reference. This tool is designed for pruning branches and trimming hedges in residential outdoor environments.

2. Allgemeine Sicherheitshinweise

WARNUNG: Lesen Sie alle Sicherheitswarnungen und Anweisungen. Die Nichtbeachtung der Warnungen und Anweisungen kann zu elektrischem Schlag, Brand und/oder schweren Verletzungen führen.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, hearing protection, and sturdy footwear.
• Halten Sie Kinder und Unbeteiligte fern, während Sie das Werkzeug bedienen.
• Das Gerät darf nicht bei Nässe oder in Gegenwart von brennbaren Flüssigkeiten oder Gasen betrieben werden.
• Ensure the work area is clear of obstacles and debris.
• Prüfen Sie das Werkzeug vor jedem Gebrauch auf Beschädigungen. Verwenden Sie es nicht, wenn es beschädigt ist.
• Remove the battery pack when not in use, before cleaning, or when changing accessories.
• Maintain proper balance and footing at all times. Do not overreach.
• Use only Greenworks 40V battery packs and chargers with this tool.

3. Packungsinhalt

Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact Greenworks customer service.

• 1x 40V Power Head
• 1x Pole Saw Attachment (20 cm guide bar)
• 1x Hedge Trimmer Attachment (51 cm double-action blade)
• 1x Schultergurt
• 1x Blade Sheath (for hedge trimmer)
• 1x Chain Cover (for pole saw)
• Bedienungsanleitung

Abbildung 1: Überview of the Greenworks G40PSH 2-in-1 Pole Saw and Hedge Trimmer components.

4. Montage und Einrichtung

The Greenworks G40PSH is a modular tool. Follow these steps to assemble the desired configuration.

4.1 Attaching the Pole Extension (if applicable)

1. Align the arrow on the pole extension with the arrow on the power head.
2. Push the pole extension into the power head until it clicks into place.
3. Den Kupplungsknopf fest anziehen.

4.2 Attaching the Hedge Trimmer Head

1. Ensure the battery is removed from the power head.
2. Align the arrow on the hedge trimmer attachment with the arrow on the power head (or pole extension).
3. Push the attachment into the power head/pole extension until it clicks into place.
4. Den Kupplungsknopf fest anziehen.

4.3 Attaching the Pole Saw Head

1. Ensure the battery is removed from the power head.
2. Align the arrow on the pole saw attachment with the arrow on the power head (or pole extension).
3. Push the attachment into the power head/pole extension until it clicks into place.
4. Den Kupplungsknopf fest anziehen.
5. Fill the chain oil reservoir with appropriate bar and chain oil. The pole saw features automatic lubrication.

Figure 2: The Greenworks G40PSH tool in its assembled form.

4.4 Installieren des Akkupacks

1. Stellen Sie sicher, dass das Werkzeug ausgeschaltet ist.
2. Richten Sie die Rippen am Akkupack an den Rillen im Akkuanschluss des Werkzeugs aus.
3. Slide the battery pack into the tool until it locks into place.
4. Zum Entnehmen den Batterieentriegelungsknopf drücken und die Batterie herausziehen.

5. Bedienungsanleitung

Always ensure you have read and understood the safety information before operating the tool.

5.1 Allgemeine Bedienung

1. Wear all recommended PPE.
2. Attach the shoulder strap for improved balance and reduced fatigue, adjusting it for comfortable use.
3. To start the tool, press the safety lock-out button and then squeeze the trigger switch.
4. Um das Werkzeug anzuhalten, lassen Sie den Auslöseschalter los.

Figure 3: The tool offers an extended reach of up to 2.4 meters for high branches.

5.2 Using the Hedge Trimmer Attachment

1. Einstellen des Schwenkkopfes: The hedge trimmer head can be adjusted to 7 different positions over a 105-degree range. To adjust, press the pivot release button and rotate the head to the desired angle. Ensure it locks securely before use.
2. Trimmtechnik: Use a sweeping motion, cutting small amounts at a time. For best results, cut the sides of the hedge first, then the top.
3. Schnittleistung: The hedge trimmer is designed for branches up to 18 mm in diameter. Do not force the blades through thicker material.

Figure 4: The hedge trimmer features a 7-position pivoting head for optimal cutting angles.

5.3 Using the Pole Saw Attachment

1. Kettenölung: Ensure the chain oil reservoir is filled before each use. The automatic oiler will lubricate the chain during operation.
2. Kettenspannung: Periodically check chain tension. The tool features a tool-less bar and chain locking system for easy adjustment. A properly tensioned chain should be snug but still allow you to pull it around the guide bar by hand.
3. Schnitttechnik: Allow the saw to reach full speed before contacting the branch. Make a small undercut first to prevent pinching, then complete the cut from the top. Support the branch to prevent it from tearing the bark when it falls.
4. Schnittleistung: The pole saw is suitable for branches up to 20 cm in diameter.

Figure 5: The pole saw includes an automatic lubrication system for the chain.

Figure 6: Tool-less chain tensioning ensures proper chain tightness for safe operation.

6. Wartung

Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihres Geräts. Entfernen Sie vor Wartungsarbeiten immer den Akku.

6.1 Reinigung

• Reinigen Sie das Werkzeug nach jedem Gebrauch mit einem Desinfektionsmittel.amp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Remove any debris, sap, or sawdust from the hedge trimmer blades and pole saw chain/guide bar.
• Stellen Sie sicher, dass die Lüftungsöffnungen frei von Hindernissen sind.

6.2 Pflege der Heckenscherenklinge

• Lubricate the blades with light machine oil after each use to prevent rust and ensure smooth operation.
• If blades become dull, they can be sharpened by a qualified service technician.
• Always store the hedge trimmer with the blade sheath in place.

6.3 Pole Saw Chain and Guide Bar Care

• Regularly check the chain for sharpness and damage. A dull chain can cause kickback and poor cutting performance.
• Sharpen the chain as needed or replace it if damaged. Refer to the chain manufacturer's instructions for sharpening.
• Reinigen Sie die Führungsschienennut und die Ölbohrungen, um eine ordnungsgemäße Schmierung zu gewährleisten.
• Drehen Sie die Führungsschiene regelmäßig um, um einen gleichmäßigen Verschleiß zu gewährleisten.
• Always store the pole saw with the chain cover in place.

6.4 Speicherung

• Bewahren Sie das Werkzeug an einem trockenen, sicheren Ort außerhalb der Reichweite von Kindern auf.
• Vor der Lagerung den Akku aus dem Gerät entfernen.
• Akkus sollten an einem kühlen, trockenen Ort, fern von direkter Sonneneinstrahlung und extremen Temperaturen, aufbewahrt werden.

7. Fehlerbehebung

This section addresses common issues you might encounter. For problems not listed here, contact Greenworks customer service.

8. Spezifikationen

9. Garantie und Support

9.1 Garantieinformationen

The Greenworks G40PSH 40V 2-in-1 Cordless Pole Saw and Hedge Trimmer comes with a 3 Jahr Garantie from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage due to misuse, neglect, unauthorized repairs, or normal wear and tear.

9.2 Kundendienst

For technical assistance, spare parts, or warranty claims, please contact Greenworks customer service. Refer to the Greenworks official website or your product packaging for the most current contact information in your region.

When contacting support, please have your product model number (G40PSH) and serial number (if applicable) ready.