Casio G-SHOCK AWG-M100SB-2A Radio Wave Solar Watch User Manual

Einführung

This manual provides essential instructions for the proper use and maintenance of your Casio G-SHOCK AWG-M100SB-2A watch. This timepiece features G-SHOCK's renowned shock resistance, 100-meter water resistance, Tough Solar power, and Multi-Band 6 radio-controlled timekeeping for accurate time synchronization.

Please read this manual thoroughly to ensure correct operation and to take full advantage of your watch's capabilities. Keep this manual for future reference.

Abbildung 1: Vorderseite view of the Casio G-SHOCK AWG-M100SB-2A watch, displaying its analog and digital elements.

Aufstellen

1. Anfangsgebühr

Your watch is equipped with Tough Solar power. Before initial use, expose the watch face to bright light for several hours to ensure it is adequately charged. Avoid prolonged storage in dark places to prevent the power level from dropping.

2. Festlegen Ihrer Heimatstadt

The Home City setting is crucial for correct time display and radio signal reception. To set your Home City:

1. Im Zeitmessmodus die Taste gedrückt halten ANPASSEN button (top left) for approximately two seconds until the city code starts to flash.
2. Verwenden Sie die UMKEHREN (oben rechts) und NACH VORNE (bottom right) buttons to select your desired city code.
3. Drücken Sie die MODUS button (bottom left) to cycle through other settings (DST, 12/24-hour format, etc.) and adjust as needed using the UMKEHREN Und NACH VORNE Schaltflächen.
4. Drücken ANPASSEN , um den Einstellungsbildschirm zu verlassen.

3. Time Calibration (Radio Wave Reception)

The watch automatically receives time calibration signals. For optimal reception, place the watch near a window at night. You can also perform manual reception:

1. Im Zeitmessmodus die Taste gedrückt halten NACH VORNE button (bottom right) for approximately two seconds.
2. The watch will attempt to receive the calibration signal. This process can take several minutes.
3. After reception, the display will show 'GET' if successful, or 'ERR' if unsuccessful.

Abbildung 2: Nahaufnahme view of the watch dial, highlighting the analog hands, digital displays, and button labels (ADJUST, REVERSE, MODE, FORWARD).

Betrieb

Tastenfunktionen

• ANPASSEN (Top Left): Used to enter and exit setting modes, and to confirm settings.
• MODUS (Bottom Left): Cycles through the watch's different modes (Timekeeping, World Time, Stopwatch, Countdown Timer, Alarm).
• UMKEHREN (Top Right): Used to scroll backward through settings or increase values.
• NACH VORNE (Bottom Right): Used to scroll forward through settings, decrease values, or initiate manual radio signal reception.

Abbildung 3: Seite view of the watch, illustrating the placement and labels of the control buttons.

Modusnavigation

Drücken Sie die MODUS button to switch between the following functions:

• Zeitnehmungsmodus: Zeigt die aktuelle Uhrzeit und das Datum an.
• Weltzeitmodus: View the current time in various cities around the globe.
• Stoppuhr-Modus: Verstrichene Zeit messen.
• Countdown-Timer-Modus: Stelle einen Countdown ab einem festgelegten Zeitpunkt ein.
• Alarmmodus: Set up to five daily alarms and an hourly-Zeitsignal.

Beleuchtung

Drücken Sie die UMKEHREN button (top right) in Timekeeping Mode to activate the LED light for illumination of the analog dial. The duration of the illumination can be adjusted in the settings.

Handschaltfunktion

If the analog hands obstruct the digital displays, you can temporarily shift them. In any mode, hold down the MODUS button for approximately two seconds. The hands will move to a position that does not block the digital displays. To return the hands to normal timekeeping, press any button.

Wartung

Reinigung

Wischen Sie die Uhr regelmäßig mit einem weichen, trockenen Tuch ab, um Schmutz und Feuchtigkeit zu entfernen. Bei hartnäckigem Schmutz verwenden Sie ein weiches Tuch.ampMit Wasser und einem milden, neutralen Reinigungsmittel abspülen und anschließend trocken wischen.

Wasserbeständigkeit

This watch is water resistant to 100 meters. It is suitable for swimming and snorkeling. Betätigen Sie keine Knöpfe, solange die Uhr nass oder in Wasser eingetaucht ist.

Energieverwaltung

To maintain optimal power levels, expose the watch face to light whenever possible. Avoid storing the watch in dark places for extended periods, as this can deplete the battery and affect functionality.

Fehlerbehebung

• Falsche Zeitanzeige:
  Check your Home City setting. Ensure the watch is receiving time calibration signals. If automatic reception is not working, try manual reception. If the analog hands do not match the digital time, perform a hand alignment correction (refer to the full manual for detailed steps).
• No Display or Low Power Indicator:
  The watch may be low on power. Expose the watch face to bright light for several hours to charge it.
• Schaltflächen reagieren nicht:
  Ensure the watch is not in a frozen state due to low power. If the issue persists after charging, a full reset might be necessary (consult the comprehensive Casio module manual for your specific module number, usually found on the case back).

Technische Daten

Abbildung 4: Rückseite view of the watch, showing the stainless steel case back with model and water resistance markings.

Garantieinformationen

For detailed warranty information, please refer to the warranty card included with your purchase or contact your retailer. Casio's official website may also provide regional warranty details.

Unterstützung

Should you require further assistance or have questions not covered in this manual, please visit the official Casio website or contact Casio customer support in your region. Ensure you have your watch's model number (AWG-M100SB-2A) ready when seeking support.