Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. Produktüberschreitungview

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. Einrichtung

To set up your Keeley Bubble Tron pedal, follow these steps:

1. Stromanschluss: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. Eingangsanschluss: Schließen Sie Ihre Gitarre oder ein anderes Instrument mit einem Standard-Instrumentenkabel (6,35 mm) an die "INPUT"-Buchse auf der rechten Seite des Pedals an.
3. Ausgangsanschluss: Connect the "OUTPUT" jack on the left side of the pedal to your ampSchließen Sie den Verstärker oder das nächste Pedal in Ihrer Signalkette mit einem Standard-Instrumentenkabel (6,35 mm Klinkenstecker) an.
4. Anfangseinstellungen: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. Bedienungsanleitung

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

Steuerung:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• SENS (Empfindlichkeit):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp auf, ramp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• EBENE: Steuert den Gesamtausgangspegel des Effekts.
• FUSSSCHALTER: Schaltet den Effekt ein und aus.

Mode Select Switch:

• UP: Activates Filter mode.
• MITTE: Activates Phase mode.
• NIEDER: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • Vintage-Modus: Rolls off some high frequencies for a warmer tone.
  • Moderner Modus: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • Bank 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. Wartung

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• Reinigung: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Lagerung: Bewahren Sie das Pedal an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen, auf. Trennen Sie es bei längerer Nichtbenutzung vom Stromnetz.
• Stromversorgung: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• Verbindungen: Ensure all cables are securely connected. Avoid excessive force when plugging or unplugging cables.

5. Fehlerbehebung

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• Kein Ton:
  • Prüfen Sie alle Kabelverbindungen (Eingang, Ausgang, Stromversorgung).
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • Stellen Sie sicher, dass Ihr Instrument und ampregler ordnungsgemäß funktionieren.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• Unerwünschte Geräusche/Brummen:
  • Verwenden Sie ein hochwertiges, isoliertes Netzteil.
  • Prüfen Sie auf defekte Kabel.
  • Ensure proper grounding of your amplifier und andere Geräte.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. Spezifikationen

7. Garantie und Support

For warranty information and technical support, please refer to the official Keeley Electronics webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.

Offiziell WebWebsite: Keeley Electronics Store