Produkt überview
The Newhouse Hardware WCM120 Wireless Door Chime Kit provides a convenient and reliable solution for your home's entryway. This kit includes a wireless door chime receiver and a push-button transmitter, designed for easy installation and operation.
Zu den Hauptmerkmalen gehören:
- Reichweite bis zu 75 Fuß.
- 32 selectable codes to prevent interference from other wireless devices.
- Two selectable chime sounds: Westminster Chime and Ding-Dong.
- Includes a wireless push-button transmitter and two 3-Volt batteries for the transmitter.
Image: The Newhouse Hardware WCM120 Wireless Door Chime Kit, showing the white rectangular chime unit and the smaller white push-button transmitter.
Setup und Installation
1. Auspacken und Einlegen der Batterie
Carefully remove all components from the packaging. The kit includes the wireless door chime receiver, the wireless push-button transmitter, and two 3-Volt batteries for the transmitter. Please note that three AAA batteries for the receiver are nicht im Lieferumfang enthalten und muss separat erworben werden.
- Receiver Battery Installation: Locate the battery compartment on the back of the door chime receiver. Insert three AAA batteries, ensuring correct polarity (+/-).
- Einlegen der Senderbatterie: The two 3-Volt batteries for the transmitter are included. Open the transmitter casing and insert the batteries, observing polarity.
Image: All components of the Newhouse Hardware WCM120 Wireless Door Chime Kit laid out, including the chime unit, push-button, mounting screws, wall anchors, and adhesive strip.
2. Montage des Empfängers
The door chime receiver can be placed on a flat surface or mounted to a wall. For optimal performance, choose a central location within 75 feet of where the push-button transmitter will be installed.
- Wandmontage: Use the provided screws and wall anchors to secure the receiver to a wall. Ensure it is mounted securely.
3. Mounting the Push-Button Transmitter
The push-button transmitter is designed for outdoor use and can be mounted near your door. It can be attached using either the included adhesive strip or screws.
- Klebemontage: Clean the surface where you intend to mount the transmitter. Peel the backing from the adhesive strip and firmly press the transmitter onto the desired location.
- Schraubmontage: For a more permanent installation, use the provided screws to attach the transmitter to the door frame or wall.
Bild: Vorderseite view of the Newhouse Hardware WCM120 Wireless Door Chime Kit, showing the chime unit and the push-button side-by-side.
Bedienungsanleitung
1. Selecting a Chime Sound
The WCM120 offers two distinct chime sounds: Westminster Chime and Ding-Dong. To switch between these sounds, locate the sound selection button or switch on the receiver unit. Press or toggle it to cycle through the available options until you hear your preferred chime.
2. Changing Codes to Prevent Interference
Your wireless door chime kit features 32 selectable codes to help prevent interference from other wireless devices in your vicinity. If you experience false rings or inconsistent operation, you may need to change the operating code.
- Locate the code selection jumpers or switches inside both the receiver and the transmitter units.
- Using a small tool (e.g., a screwdriver), adjust the jumpers/switches in both units to a new, matching code. Both the receiver and transmitter must be set to the same code for the system to function correctly.
- Test the system after changing the code to ensure proper communication.
3. Täglicher Gebrauch
Once installed and configured, simply press the push-button transmitter to activate the chime. The receiver will play the selected chime sound.
Wartung
Batteriewechsel
Regular battery replacement is essential for consistent performance. The operating range and chime volume may decrease as batteries lose power.
- Empfänger: Replace the three AAA batteries in the receiver when the chime sound becomes faint or stops working.
- Sender: Replace the two 3-Volt batteries in the push-button transmitter if the chime does not activate when the button is pressed, or if the range is significantly reduced.
Always dispose of old batteries responsibly according to local regulations.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Gong ertönt nicht, wenn der Knopf gedrückt wird. |
|
|
| Chime rings unexpectedly (false rings). |
|
|
| Chime sound is faint or distorted. |
|
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | WCM120 |
| Betriebsbereich | Bis zu 75 Fuß |
| Selectable Codes | 32 |
| Glockenspiel | Westminster Chime, Ding-Dong |
| Empfängerabmessungen | 3"W x 4 3/8"H (approx. 7.6cm W x 11.1cm H) |
| Push Button Dimensions | 1"W x 3 5/8"H (approx. 2.5cm W x 9.2cm H) |
| Receiver Battery Requirement | 3 x AAA-Batterien (nicht im Lieferumfang enthalten) |
| Transmitter Battery Requirement | 2 x 3-Volt batteries (included) |
| Artikelgewicht | 4.8 Unzen (ca. 136 Gramm) |
| Technische Daten | 4.5 x 2.75 x 1.5 Zoll (ca. 11.4 x 7 x 3.8 cm) |
| Farbe | Weiß |
Garantieinformationen
This Newhouse Hardware WCM120 Wireless Door Chime Kit comes with a 2 Jahr Garantie Diese Garantie gilt ab Kaufdatum und deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
For detailed warranty terms and conditions, or to initiate a warranty claim, please refer to the official Newhouse Hardware webWebsite oder wenden Sie sich an den Kundendienst.
Kundenservice
Should you encounter any issues or have questions regarding your Newhouse Hardware WCM120 Wireless Door Chime Kit that are not covered in this manual, please contact Newhouse Hardware customer support.
Weitere Hilfe finden Sie auf der offiziellen Website. Newhouse Hardware Store on Amazon.
