1. Einleitung
The Xilence Performance C CPU Cooler XC032 is engineered to provide efficient and quiet cooling for high-performance Intel CPUs. Featuring a 92mm PWM fan with fluid bearing, it ensures optimal airflow while maintaining low noise levels. This cooler is designed for compatibility with various Intel sockets and includes a stable mounting backplate for secure installation.
2. Sicherheitshinweise
- Vor der Installation oder Wartung von internen Komponenten muss der Computer immer vom Stromnetz getrennt werden.
- Handle the CPU cooler and other components with care to avoid damage to sensitive parts.
- Sorgen Sie für eine ordnungsgemäße Erdung, um elektrostatische Entladungen (ESD) zu verhindern, die elektronische Bauteile beschädigen können.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Do not obstruct the fan's airflow during operation.
- Refer to your motherboard's manual for specific CPU cooler installation guidelines.
3. Packungsinhalt
Überprüfen Sie, ob alle unten aufgeführten Komponenten in Ihrem Paket enthalten sind:
- I250PWM Intel CPU Cooler
- 92 mm PWM Fan (integrated)
- Lüfterschrauben
- Wärmeleitpaste (voraufgetragen oder in einer Tube)
- Rückplatte
Figure 3.1: All components included in the Xilence Performance C CPU Cooler XC032 package.
4. Einrichtung und Installation
Follow these general steps for installing your Xilence Performance C CPU Cooler. Specific steps may vary slightly depending on your motherboard and PC case.
- Bereiten Sie das Motherboard vor: Place the motherboard on a non-conductive surface. If a CPU is already installed, ensure it is properly seated in the socket.
- Installieren Sie die Rückplatte: Position the included backplate on the rear side of the motherboard, aligning its holes with the CPU cooler mounting holes around the CPU socket. This cooler is compatible with Intel sockets 1150, 1151, 1155, and 1156.
Figure 4.1: CPU Cooler with separate backplate.
- Wärmeleitpaste auftragen (falls nicht bereits aufgetragen): If your cooler does not have thermal paste pre-applied to its base, apply a small amount (pea-sized dot) to the center of the CPU's integrated heat spreader (IHS).
- Kühler montieren: Carefully place the CPU cooler onto the CPU, aligning the mounting screws with the holes in the backplate. Press down gently and evenly.
- Sichern Sie die Kühlbox: Tighten the four spring-loaded screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until they are finger-tight. Do not overtighten. The spring mechanism ensures even pressure.
Abbildung 4.2: Schräg view of the cooler showing the fan and heatsink.
- Schließen Sie das Lüfterkabel an: Locate the 4-pin PWM fan header on your motherboard (usually labeled "CPU_FAN") and connect the cooler's 4-pin cable to it. Ensure the connector is fully seated.
- Endkontrolle: Double-check all connections and ensure the cooler is securely mounted and not obstructing any other components.
5. Bedienungsanleitung
The Xilence Performance C CPU Cooler XC032 operates automatically via its PWM (Pulse Width Modulation) control. The motherboard's BIOS/UEFI or operating system software will regulate the fan speed based on the CPU temperature, ensuring optimal cooling performance and noise levels.
- Automatische Lüftersteuerung: The 4-pin PWM connection allows the motherboard to dynamically adjust the fan speed (RPM) according to the CPU's thermal load. This results in quieter operation during low-load tasks and increased cooling power when needed.
- Überwachung: You can monitor CPU temperatures and fan speeds using motherboard monitoring software or utilities provided by your operating system.
- Geräuschpegel: The fan is designed for quiet operation, with a typical noise level of 26.4 dB.
Abbildung 5.1: Oben view of the CPU cooler fan.
6. Wartung
Regelmäßige Wartung trägt dazu bei, die Langlebigkeit und optimale Leistung Ihres CPU-Kühlers zu gewährleisten.
- Staubentfernung: Periodically (e.g., every 3-6 months), use compressed air to gently blow dust out of the heatsink fins and fan blades. Ensure the fan is not spinning rapidly during this process to prevent damage to the bearings.
- Lüfterreinigung: If dust accumulates on the fan blades, carefully wipe them with a soft, dry cloth.
- Wärmeleitpaste: The thermal paste typically lasts for several years. If you notice significantly higher CPU temperatures over time, consider reapplying fresh thermal paste after carefully cleaning the old paste from both the CPU and cooler base.
- Inspektion: Regularly inspect the mounting screws to ensure they remain secure.
7. Fehlerbehebung
Sollten Sie Probleme mit Ihrem CPU-Kühler haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Lüfter dreht sich nicht | Fan cable disconnected; Faulty fan header; Fan failure | Check fan cable connection to motherboard; Try a different fan header; Replace cooler if fan is faulty. |
| Hohe CPU-Temperaturen | Improper cooler mounting; Insufficient thermal paste; Dust accumulation; Poor case airflow | Re-seat cooler, ensuring even pressure; Reapply thermal paste; Clean heatsink and fan; Improve case ventilation. |
| übermäßige Lüftergeräusche | Dust in fan bearings; Fan hitting cables; High fan speed due to high CPU load | Clean fan; Ensure no cables are obstructing fan blades; Check CPU load and temperatures; Adjust fan curve in BIOS/UEFI if desired. |
8. Spezifikationen
Key technical specifications for the Xilence Performance C CPU Cooler XC032:
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | XC032 |
| Technische Daten | 3.94 x 3.94 x 3.15 Zoll (10 x 10 x 8 cm) |
| Gewicht | 11.46 Unzen (325 Gramm) |
| Kompatible Sockel | Intel LGA 1150, 1151, 1155, 1156 |
| Kompatible Geräte | Core i7/i5/i3, Pentium G9650 |
| Kühlmethode | Luft |
| Durchmesser des Lüfters | 92 mm |
| Lüfteranschluss | 4-Pin PWM |
| Maximale Drehzahl | 2500 U/min |
| Luftstromkapazität | 44.25 CFM (75.2 M³/H) |
| Geräuschpegel | 26.4 dB |
| TDP (Thermal Design Power) | Bis zu 95 Watt |
| Bandtage | 12 Volt |
| Material | Aluminium |
9. Garantie und Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Xilence products typically come with a manufacturer's warranty covering defects in materials and workmanship.
- Hersteller WebWebsite: Visit the official Xilence webWebsite mit den aktuellsten Support-Ressourcen, FAQs und Kontaktinformationen.
- Kaufbeleg: Retain your proof of purchase (receipt or invoice) as it may be required for warranty claims.
