Einführung
The AcuRite 06045M Lightning Detector Sensor is designed to monitor lightning strikes, outdoor temperature, and humidity. This sensor wirelessly transmits data to compatible AcuRite weather stations (sold separately), providing essential environmental information. This manual provides instructions for the setup, operation, and maintenance of your sensor.
Produkt überview
The AcuRite 06045M sensor features a compact, weather-resistant design with integrated mounting options. It includes indicators for lightning strikes and wireless signal strength.
Aufstellen
1. Einlegen der Batterie
- Suchen Sie das Batteriefach auf der Rückseite des Sensors.
- Entfernen Sie die Abdeckung des Batteriefachs.
- Insert 4 AA alkaline or lithium batteries (not included) according to the polarity markings (+/-).
- Bringen Sie den Batteriefachdeckel wieder fest an.
2. Montage des Sensors
For optimal performance, choose a location that is:
- Outdoors, away from direct sunlight to ensure accurate temperature readings.
- Mindestens 5 m über dem Boden.
- Away from sources of electrical interference such as microwave ovens, cell phones, Wi-Fi routers, and cordless drills, which can cause false lightning strike detections.
- Within 330 feet (100 meters) of your compatible AcuRite weather station for reliable wireless transmission.
Use the integrated easy-mount hanger to hang the sensor on a suitable surface like a post or tree branch.
Betrieb
Blitzerkennung
The sensor detects lightning strikes within a 25-mile (40-kilometer) radius. When lightning is detected, the Lightning Strike Indicator will flash, and an audible alarm will sound. The sensor transmits data every 24 seconds under normal conditions, and every 8 seconds once lightning is detected.
Temperatur- und Feuchtigkeitsüberwachung
The built-in thermometer and hygrometer accurately measure outdoor temperature and humidity conditions. These readings are transmitted wirelessly to your compatible AcuRite weather station.
Wartung
Reinigung
Reinigen Sie den Sensor mit einem weichen, damp cloth. Do not use abrasive cleaners or solvents that may damage the plastic housing or electronic components.
Batteriewechsel
Replace batteries when the low battery indicator appears on your compatible display unit. Always replace all 4 AA batteries at the same time with fresh batteries.
Fehlerbehebung
- Keine Datenübertragung: Ensure batteries are fresh and correctly installed. Verify the sensor is within range of the compatible weather station (up to 330 feet). Check for obstructions between the sensor and the display unit.
- Ungenaue Temperatur-/Luftfeuchtigkeitsmesswerte: Ensure the sensor is mounted in a shaded area, away from direct sunlight, which can artificially inflate temperature readings.
- False Lightning Detections: The sensor is sensitive to electromagnetic interference. Avoid placing the sensor near appliances such as microwave ovens, cell phones, Wi-Fi routers, or other electronic devices that emit radio frequency energy. Position the sensor well away from the base unit if experiencing frequent false positives.
- Sensor verbindet sich nicht: If the sensor does not connect to your AcuRite display, try resetting both units. Remove batteries from both, wait a few minutes, then reinsert batteries into the sensor first, followed by the display unit.
Technische Daten
| Modellnummer | 06045 Mio. |
| Blitzortungsbereich | Bis zu 25 Meilen (40 Kilometer) |
| Temperaturbereich | Refer to compatible display unit specifications |
| Temperaturgenauigkeit | +/- 2 degrees Fahrenheit (+/- 0.5 degrees Celsius) |
| Feuchtigkeitsbereich | Refer to compatible display unit specifications |
| Drahtlose Reichweite | Bis zu 330 Fuß (100 Meter) |
| Stromquelle | 4 x AA Alkali- oder Lithiumbatterien |
| Datenübertragungsintervall | Every 24 seconds (every 8 seconds when lightning detected) |
| Maße | 0.9 Zoll T x 2.63 Zoll B x 5.88 Zoll H |
| Material | Plastik |
Kompatibilität
This replacement lightning detector sensor is compatible with the following AcuRite weather station models:
- 01021, 01021M
- 01022, 01022M
- 02080
- 06046
- 06047, 06047M
- 06058 Mio.
For remote monitoring capabilities, the sensor can be paired with AcuRite Access (sold separately) to view data via an app and receive alerts.
Support und Garantie
For product assistance or compatibility inquiries, please contact AcuRite Customer Support at (877) 221-1252.
Information regarding product warranty can typically be found on the manufacturer's official website or within the product packaging. Please refer to these resources for specific warranty terms and conditions.
