Produkt überview
The Alpine Hemlock Hand Dryer is a heavy-duty, high-speed commercial hand dryer designed for efficient and hygienic hand drying. Constructed from durable stainless steel, it offers quick drying times and is suitable for various commercial and public restroom environments. This manual provides essential information for the safe and proper installation, operation, and maintenance of your hand dryer.
Bild: Vorderseite view of the Alpine Hemlock Hand Dryer, highlighting its heavy-duty design and compliance.
Hauptmerkmale
- Schnelles Trocknen: Dries hands in approximately 8-10 seconds.
- Starke Leistung: Features a motor speed of 22,000 RPM and a wind speed of 200 MPH.
- Einstellbare Wärme: Provides heated air between 45-65°C.
- Automatische Operation: Equipped with an automatic motion sensor with a sensing distance of 5 +/- 1 inch.
- Langlebige Konstruktion: Made from heavy-duty, corrosion-proof stainless steel for long-lasting use.
- Energieeffizient: Designed to be cost-efficient, offering up to 95% savings compared to paper towels.
- Flexible Installation: Supports both simple plug-in and hard-wired power options.
- Sicherheit und Compliance: UL Listed and ADA Compliant.
Image: Visual representation of the hand dryer's motor speed, wind speed, and heat settings.
Image: Diagram showing the cost efficiency of the hand dryer versus paper towel usage.
Installation
Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- Alpine Hemlock Hand Dryer Unit
- Befestigungsschrauben
- Wandanker
- Unterlegscheiben
- Innensechskantschlüssel
Image: Hand dryer dimensions and a visual of the included mounting hardware.
Montageanleitung
- Ort auswählen: Choose a suitable wall location, ensuring adequate space around the unit for proper operation and maintenance. Consider ADA compliance guidelines for height and clearance.
- Bohrpunkte markieren: Use the mounting template (if provided, or measure according to the unit's backplate) to mark the drilling points on the wall.
- Bohrlöcher: Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or hollow surfaces.
- Sichere Montageplatte: Attach the hand dryer's mounting plate (if separate) to the wall using the provided screws and washers.
- Elektrischer Anschluss:
- Plug-In-Option: If using the plug-in option, ensure a compatible 110-120V outlet is available near the installation site.
- Hard-Wired Option: For hard-wired installations, it is recommended to consult a qualified electrician. Ensure power is disconnected at the circuit breaker before making any electrical connections. Connect the hand dryer's wiring to the building's electrical supply according to local electrical codes.
- Attach Hand Dryer: Carefully align the hand dryer unit with the mounting plate and secure it using the remaining screws or locking mechanism.
- Testbetrieb: Restore power and test the hand dryer to ensure it functions correctly.
Image: Illustration of the two available power options: simple plug-in and hard-wired.
Betrieb
The Alpine Hemlock Hand Dryer operates automatically using an infrared motion sensor.
- Aktivieren: Place your hands directly under the air outlet. The sensor will detect your hands and activate the air blower. A blue light will illuminate to indicate operation.
- Trockene Hände: Move your hands slowly back and forth under the airflow to ensure even drying. The powerful air stream and heated air will dry your hands quickly.
- Deaktivieren: Remove your hands from the sensor's range. The hand dryer will automatically shut off after a few seconds.
Image: Diagram illustrating the optimal hand placement and sensing distance for automatic operation.
Wartung
Regelmäßige Wartung gewährleistet optimale Leistung und lange Lebensdauer Ihres Händetrockners.
- Außenreinigung: Wischen Sie die Edelstahl-Außenseite mit einem weichen, fusselfreien Tuch ab.amp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could scratch the finish.
- Lufteinlassgitter: Periodically check the air inlet grille for dust or lint accumulation. Clean with a soft brush or vacuum cleaner to maintain proper airflow.
- Sensorreinigung: Ensure the motion sensor lens is clean and free from obstructions. Wipe gently with a soft cloth.
- Inspektion: Regularly inspect the power cord (if plug-in) and mounting for any signs of damage or loosening.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Händetrockner lässt sich nicht aktivieren. | No power supply; Sensor obstructed or dirty; Hands not within sensing range. | Check power connection/circuit breaker; Clean sensor; Place hands within 5 +/- 1 inch of outlet. |
| Schwache Luftzirkulation oder langsame Trocknung. | Air inlet grille obstructed; Motor issue. | Clean air inlet grille; Contact customer support if problem persists. |
| Hand dryer runs continuously. | Sensor malfunction; Obstruction in sensor path. | Remove any obstructions; Clean sensor; Contact customer support. |
Technische Daten
- Modell: B01M0QQ9Z2
- Abmessungen (H x B x T): 12.31 Zoll x 11.40 Zoll x 6.68 Zoll
- Gewicht: 10.96 kg
- Elektrische Spezifikationen: 110-120 Volts, 50/60 Hz
- Power Consumption (Heating Element ON): 1240-1800 Watts (15 Amps)
- Power Consumption (Heating Element OFF): 700 Watt (5.8 .) Amps)
- Motordrehzahl: 22,000 U/min
- Windgeschwindigkeit: 200 km/h
- Lufttemperatur: 45-65°C
- Trocknungszeit: 8-10 Sekunden
- Material: Heavy-Duty Stainless Steel
- Zertifizierungen: UL Listed, ADA Compliant
Garantie und Support
The Alpine Hemlock Hand Dryer comes with a 5 Jahr eingeschränkte Garantie. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims, technical support, or any inquiries, please contact Alpine Industries customer service.
Bitte bewahren Sie Ihren Kaufbeleg zur Überprüfung der Garantie auf.
Image: Visual representation of the 5-year limited warranty coverage.
