Miele XXL Performance Pack: AirClean 3D GN Vacuum Bags & HEPA Filter HA50 Instruction Manual

1. Einleitung

This instruction manual provides essential information for the correct installation, use, and maintenance of your Miele XXL Performance Pack, which includes AirClean 3D GN Vacuum Cleaner Bags and a HEPA Filter HA50. Adhering to these instructions will ensure optimal performance and longevity of your Miele vacuum cleaner and its filtration system.

2. Lieferumfang

The Miele XXL Performance Pack contains the following items:

• 16 x Miele AirClean 3D GN Vacuum Cleaner Bags
• 1 x HEPA AirClean Filter HA50
• 2 x Motor Protection Filters
• 2 x Exhaust Filters

Figure 1: Contents of the Miele XXL Performance Pack.

3. Kompatibilität

This performance pack is designed for use with the following Miele vacuum cleaner models:

• Miele Complete C1
• Miele Compact C1
• Miele Compact C2
• Miele S6
• Miele S4

Using original Miele AirClean branded FilterBags and filters is recommended to ensure proper fitment and maintain optimal machine performance. Off-brand alternatives may cause damage or reduce efficiency.

4. Einrichtung und Installation

4.1. Installing AirClean 3D GN Vacuum Bags

1. Open the vacuum cleaner compartment. The method for opening may vary slightly by model; refer to your vacuum cleaner's specific manual if unsure.
2. Carefully remove the full vacuum bag by pulling the blue collar upwards. The bag's self-closing mechanism will seal the opening, preventing dust from escaping. Dispose of the full bag responsibly.
3. Take a new Miele AirClean 3D GN vacuum bag from the pack. Ensure the blue collar is fully open.
4. Slide the new bag's blue collar into the bag holder until it clicks securely into place. Ensure the bag is fully unfolded within the compartment.
5. Close the vacuum cleaner compartment lid firmly until it latches.

Figure 2: A new Miele AirClean 3D GN vacuum bag.

Figure 3: Proper insertion of the vacuum bag into the appliance.

4.2. Installing HEPA AirClean Filter HA50

1. Locate the filter compartment, typically near the exhaust vent of your vacuum cleaner. Refer to your vacuum cleaner's manual for the exact location.
2. Öffnen Sie die Abdeckung des Filterfachs.
3. Remove the old HEPA filter by pulling it out. Note the orientation of the filter for correct re-installation.
4. Insert the new Miele HEPA AirClean Filter HA50 into the compartment, ensuring it is correctly oriented and fits snugly.
5. Schließen Sie den Filterfachdeckel fest.

Figure 4: The Miele HEPA AirClean Filter HA50.

4.3. Installing Motor Protection and Exhaust Filters

The Miele XXL Performance Pack also includes motor protection and exhaust filters. These should be replaced each time you start a new pack of vacuum bags to maintain optimal filtration and protect your vacuum's motor. Refer to your vacuum cleaner's manual for specific instructions on locating and replacing these filters, as their placement can vary by model.

5. Bedienungsanleitung

With new bags and filters installed, your Miele vacuum cleaner is ready for operation. The AirClean 3D GN bags and HEPA filter work in conjunction to provide effective filtration, trapping fine dust, allergens, viruses, and bacteria. This significantly reduces the amount of dust and particles recirculated into the air, contributing to improved indoor air hygiene.

Ensure all compartments are securely closed before operating the vacuum cleaner to prevent dust leakage and maintain suction power.

6. Wartung

Regular maintenance of your vacuum bags and filters is crucial for sustaining the performance and efficiency of your Miele vacuum cleaner.

6.1. Replacing Vacuum Bags

Replace the vacuum bag when the bag change indicator on your vacuum cleaner signals that it is full, or when you notice a decrease in suction power. The self-closing mechanism of the AirClean 3D GN bags ensures hygienic disposal without contact with dust.

6.2. Replacing HEPA AirClean Filter HA50

The HEPA AirClean Filter HA50 should be replaced approximately every 50 operating hours or at least once a year, whichever comes first. Some Miele models feature a filter change indicator that turns red when replacement is due. Regular replacement ensures maximum air hygiene and effective trapping of fine particles.

6.3. Replacing Motor Protection and Exhaust Filters

The motor protection and exhaust filters included in this pack should be replaced with each new box of Miele AirClean 3D GN vacuum bags. These filters play a vital role in protecting the motor from dust and ensuring clean exhaust air. Consult your vacuum cleaner's operating instructions for precise replacement procedures.

7. Fehlerbehebung

If you experience issues with your Miele vacuum cleaner after installing new bags or filters, consider the following:

• Reduzierte Saugleistung: Check if the vacuum bag is correctly installed and not overfilled. Ensure all filters (HEPA, motor protection, exhaust) are clean and properly seated. Verify that the hose and attachments are free from blockages.
• Staubaustritt: Confirm that the vacuum bag is fully inserted and its self-closing mechanism is engaged. Ensure the filter compartment covers are securely closed. Check for any damage to the vacuum bag or filters.
• Ungewöhnliche Gerüche: This may indicate a need to replace the filters, especially if using an Active AirClean filter (not included in this pack but available for odor control).

Always use original Miele replacement parts to ensure compatibility and maintain the performance and warranty of your appliance.

8. Spezifikationen

9. Garantie und Support

Miele is committed to providing high-quality products. For specific warranty information regarding your Miele vacuum cleaner or its accessories, please refer to the documentation provided with your original appliance purchase or visit the official Miele website. For technical support or further assistance, please contact Miele customer service.