CINOTON 26W LED-Wandleuchte – Bedienungsanleitung

1. Einführung und Endeview

The CINOTON 26W LED Wall Pack Light is engineered for robust outdoor illumination, offering a powerful 3000 lumens of 5000K daylight. Its integrated dusk-to-dawn photocell sensor ensures automatic operation, turning the light on at sundown and off at sunrise, optimizing energy consumption. Constructed with a durable die-casting aluminum housing and an IP65 waterproof rating, this fixture is designed for longevity and performance in various outdoor environments, from residential gardens to commercial warehouses.

Figure 1: CINOTON 26W LED Wall Pack Light - Front View

Dieses Bild zeigt die Vorderseite. view of the CINOTON 26W LED Wall Pack Light, highlighting its clear lens and integrated photocell sensor at the top. The robust design is evident, suitable for various outdoor applications.

Abbildung 2: Überview of 26W LED Wall Pack Lights Features

This graphic provides a comprehensive overview of the light's features, including energy saving, ETL listing, 5000K daylight, IP65 waterproof rating, 3000 lumens, and 100-277V compatibility.

2. Einrichtung und Installation

The CINOTON LED Wall Pack Light offers two primary mounting options: direct wall mount and conduit mount, providing flexibility for various outdoor wiring scenarios. Ensure power is turned off at the circuit breaker before beginning installation.

Installationsschritte:

1. Remove the lens by unscrewing the 2 screws securing it to the rear housing and set aside.
2. Loosen 2 screws enough to allow the reflector to slide upward until the keyhole reflector releases from the 2 screws. Remove the reflector.
3. Knock out appropriate holes in the rear housing and apply the gasket to the back surface of the housing. Fasten the rear housing to the outlet box using the screws supplied with the outlet box.
4. Complete the wiring to the power source and ground. Use the following wire connections: Black wire to Live, White wire to Neutral, Green/Yellow Green wire to Ground.
5. Installieren Sie den Reflektor.
6. Setzen Sie das Objektiv ein.

For a better seal against rain, it is suggested to apply silicone caulk around the back edges of the fixture after installation.

Figure 3: Step-by-step guide for easy installation.

This image illustrates the six key steps for installing the wall pack light, from removing the lens to completing the wiring and reassembling the fixture.

Figure 4: Direct Wall Mount and Conduit Mount Options

This graphic shows the two available mounting options: direct wall mount for concealed wiring and conduit mount for external wiring, suitable for various outdoor setups.

3. Bedienungsanleitung

The CINOTON Wall Pack Light features an automated dusk-to-dawn photocell sensor. This functionality ensures the light automatically turns on at sundown/night and turns off at sunrise/daytime, providing convenient and energy-efficient illumination without manual intervention.

Wichtige Überlegungen:

• Ensure there are no obstacles in front of the sensor light. Avoid installing the fixture in a narrow corner or under a roof with obstructions, as reflected light can affect the light sensor's correct judgment.
• The sensitivity of the photocell may be affected by temperature, weather, and surrounding light sources.

Figure 5: Dusk to Dawn Photocell Sensor Operation

This image illustrates how the integrated photocell sensor automatically controls the light, turning it off during the day and on at night.

Figure 6: Automated Dusk to Dawn Lighting

This graphic visually explains the automatic on/off function of the light based on ambient light levels, emphasizing the importance of clear sensor placement.

4. Wartung

Regular maintenance ensures optimal performance and longevity of your CINOTON LED Wall Pack Light.

Reinigung & Wartung:

1. Clean the polycarbonate lens with non-abrasive glass cleaning solution.
2. Öffnen Sie die Leuchte nicht, um die LED zu reinigen. Berühren Sie die LED nicht.
3. Es wird empfohlen, Handschuhe zu tragen, um Verletzungen während der Installation zu vermeiden.
4. Wenn Rauch oder Funken auftreten, schalten Sie bitte sofort die Stromversorgung aus.

Figure 7: IP65 Waterproof and Weather Resistant Features

This image highlights the light's IP65 waterproof rating, indicating its resistance to dust and water, ensuring durability in all weather conditions.

5. Fehlerbehebung

If you encounter issues with your CINOTON LED Wall Pack Light, refer to the common problems and solutions below.

Häufige Probleme und Lösungen:

• Why my lights flash on and off repeatedly?
  Avoid installing the fixture in a narrow corner or under a roof with obstructions. Reflected light can affect the light sensor's correct judgment.
• Nice light, but photocell doesn't work / light stays on all the time.
  The sensitivity would be affected by temperature, weather, or surrounding light sources. Ensure the sensor is not obstructed or receiving reflected light that mimics daylight.
• If the lights stop working when the return window closes.
  Please feel free to contact the 24-hours customer service team.

6. Spezifikationen

Abbildung 8: Produktabmessungen

This image provides a visual representation of the light fixture's dimensions, including length, width, and height.

7. Lieferumfang

• 1 x 26W LED Wall Pack Light (Daylight)
• 3 x Spiral Caps
• 1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache).

8. Garantie und Support

The CINOTON 26W LED Wall Pack Light comes with a Limited Warranty. For detailed information regarding warranty coverage and terms, please refer to the included Instruction Manual or contact customer support.

Schutzpläne:

• 3-Jahres-Schutzplan
• 4-Jahres-Schutzplan
• Komplettschutz: Ein Plan deckt alle berechtigten vergangenen und zukünftigen Käufe ab (monatliche Abrechnung).

For any product inquiries, technical assistance, or troubleshooting not covered in this manual, please contact CINOTON customer service at cinoton.service@gmail.com.

You can also access the official User Guide PDF for additional details: Benutzerhandbuch herunterladen (PDF)