Carson RedSight Pro Red LED Flashlight Instruction Manual

1. Einleitung

Vielen Dank für Ihren Einkauf.asing the Carson RedSight Pro Red LED Flashlight, Model SL-33. This compact and versatile flashlight is designed for situations where preserving night vision is crucial. Its red LED illumination is ideal for astronomy, photographic darkrooms, theater use, and other low-light environments. The glow-in-the-dark grip and integrated carabiner enhance its utility and portability.

2. Sicherheitshinweise

• Schauen Sie nicht direkt in das LED-Licht.
• Außerhalb der Reichweite von Kindern aufbewahren.
• Mischen Sie keine alten und neuen Batterien oder verschiedene Batterietypen.
• Entsorgen Sie Batterien gemäß den örtlichen Vorschriften.
• Setzen Sie die Taschenlampe keinen extremen Temperaturen oder Feuchtigkeit aus.

3. Packungsinhalt

Your Carson RedSight Pro package should contain:

• 1x Carson RedSight Pro Red LED Flashlight (Model SL-33)
• 1x Integrated Carabiner

Notiz: 3x AAA batteries are required and are not included with this product.

4. Teilediagramm

Familiarize yourself with the components of your RedSight Pro flashlight:

Abbildung 1: Vorderseite view of the RedSight Pro flashlight, highlighting the red LED array and the textured green rubber grip.

Abbildung 2: Draufsicht view of the flashlight, illustrating the green power button at the rear and the attached carabiner for portability.

1. Red LED Array: Provides red light illumination.
2. Glow-in-the-Dark Rubber Grip: Textured green grip for secure handling and easy location in darkness.
3. Netzschalter: Located at the rear, controls power and brightness settings.
4. Karabiner: Attached to the rear for convenient clipping to bags or belts.
5. Batteriefach: Located under the power button, accessed by unscrewing the rear cap.

5. Einrichtung

5.1 Einlegen der Batterie

The RedSight Pro requires 3x AAA batteries (not included).

1. Unscrew the rear cap of the flashlight by turning it counter-clockwise.
2. Insert three (3) AAA batteries into the battery compartment, ensuring the correct polarity (+/-) as indicated inside the compartment.
3. Screw the rear cap back on clockwise until it is securely tightened. Do not overtighten.

6. Bedienungsanleitung

6.1 Power On/Off and Brightness Settings

The RedSight Pro features two brightness settings.

Figure 3: The RedSight Pro flashlight in use, demonstrating the red light output.

1. To turn on (High Brightness): Press the green power button located at the rear of the flashlight once.
2. To switch to Low Brightness: While the flashlight is on, press the power button again.
3. So schalten Sie es aus: Press the power button a third time.

6.2 Using the Carabiner

The integrated carabiner allows for convenient attachment and transport.

Figure 4: The RedSight Pro flashlight attached to a backpack, showcasing the utility of the carabiner.

• Open the carabiner gate by pressing the spring-loaded mechanism.
• Attach the flashlight to a belt loop, backpack strap, or other suitable anchor point.
• Ensure the gate closes securely to prevent accidental detachment.

6.3 Leuchtfunktion im Dunkeln

The green rubber grip of the RedSight Pro is designed to glow in the dark, making it easy to locate in low-light conditions.

• For optimal glow, expose the flashlight's grip to a light source (natural or artificial) for a few minutes before entering a dark environment.
• The glow intensity and duration will vary based on exposure time and ambient darkness.

7. Wartung

7.1 Reinigung

• Wipe the flashlight with a soft, dry cloth.
• Do not use abrasive cleaners or solvents, as these may damage the finish or rubber grip.

7.2 Batteriewechsel

Replace batteries when the light output diminishes or the flashlight fails to turn on. Refer to Section 5.1 for battery installation instructions.

7.3 Speicherung

• If storing the flashlight for an extended period (more than 30 days), remove the batteries to prevent leakage and potential damage.
• An einem kühlen, trockenen Ort aufbewahren und direkte Sonneneinstrahlung vermeiden.

8. Fehlerbehebung

9. Spezifikationen

• Modell: SL-33
• Lichtquelle: 9 rote LEDs
• Helligkeitseinstellungen: 2
• Energiequelle: 3x AAA-Batterien (nicht im Lieferumfang enthalten)
• Abmessungen (L x B x H): Approximately 3.75 in x 1 in x 1 in (9.53 cm x 2.54 cm x 2.54 cm)
• Gewicht: Ungefähr 2.4 g
• Material: Rubber (grip), Metal/Plastic housing
• Besondere Merkmale: Glow-in-the-dark rubber grip, Integrated carabiner

10. Garantie und Support

For warranty information, technical support, or further inquiries, please visit the official Carson website or contact their customer service department. Details are typically available on the manufacturer's packaging or webWebsite.

WebWebsite: www.carson.com